69 results
Search Results
Now showing 1 - 10 of 69
Article Citation - WoS: 5Citation - Scopus: 5Performance Analysis of a Gas-To System Based on Protonic-Ceramic Electrochemical Compressor(Pergamon-elsevier Science Ltd, 2023) Baniasadi, Ehsan; Ghojavand, Fateme; Colpan, Can Ozgur; Devrim, YilserIn this study, two scenarios are considered to evaluate the performance of a protonic ceramic electrochemical hydrogen compressor (EHC) and reformer integrated with a pro-ton exchange membrane fuel cell (PEMFC). First scenario includes integration of an EHC with PEMFC and in the second scenario, steam methane reforming (SMR) is replaced by an EHC. Results show that the highest energy and exergy efficiencies of the system in the first scenario is achieved when the area-specific resistance (ASR) in EHC is 1.5 Ucm2. An in-crease in the working temperature of EHC causes a considerable rise in the exergy destruction and an increase of energy efficiency by 7% in the first scenario, while the temperature of the reformer affects the exergy destruction, negligibly. The parametric study indicates that the best value of the current density of PEMFC is 0.8481 A/cm2 and 0.8324 A/cm2 and the best current density of PEM-EHC value is 0.4468 A/cm2 and 0.11 A/cm2 in the 1st and 2nd scenarios, respectively. Under the same conditions, energy and exergy efficiencies for the first scenario are 61.63% and 54.9% and for the second scenario are 42.48% and 14.61%, respectively.(c) 2023 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.Article Citation - WoS: 9Citation - Scopus: 10Investigation of the Performance of High-Temperature Electrochemical Hydrogen Purification From Reformate Gases(Wiley, 2022) Durmus, Gizem Nur Bulanik; Durmuş, Gizem Nur Bulanık; Colpan, C. Ozgur; Devrim, Yilser; Devrim, Yılser; Durmuş, Gizem Nur Bulanık; Devrim, Yılser; Mechanical Engineering; Energy Systems Engineering; Mechanical Engineering; Energy Systems EngineeringIn the present work, the purification of hydrogen from a hydrogen/carbon dioxide/carbon monoxide (H-2:CO2:CO) mixture by a high-temperature electrochemical purification (HT-ECHP) system is examined. Electrochemical H-2 purification experiments were carried out in the temperature range of 140-180 degrees C. The effects of the molar ratio of the gases in the mixture (H-2:CO2:CO-75:25:0, H-2:CO2:CO-72:26:2,0 H-2:CO2:CO-75:22:3, H-2:CO2:CO-75:20:5, H-2:CO2:CO-97:0:3, H-2:CO2:CO-95:0:5) and the operating temperature on the electrochemical H-2 separation were investigated. As a result of the electrochemical H-2 purification experiments, it was determined that the operating temperature is the most important parameter affecting the performance. According to the results obtained, H-2 purity of 99.999% was achieved at 160 degrees C with the reformate gas mixture containing 72% H-2, 26% CO2, and 2% CO by volume. According to the polarization curves of the gas mixtures containing CO, high current densities at low voltage were reached at 180 degrees C, and it was observed that the performance increased as the temperature increased, whereas the gas mixture without CO gave the best performance at 160 degrees C.Article Mathematical Modeling of a Direct Dimethyl Ether Fuel Cell(Wiley-hindawi, 2022) Alpaydin, Guvenc Umur; Durmus, Gizem Nur Bulanik; Colpan, C. Ozgur; Devrim, YilserIn this study, a mathematical model of a direct dimethyl ether fuel cell (DDMEFC) is developed to examine the effect of operating conditions on voltage losses and cell performance. In modeling, the electrochemical relations and mass balances are used to find the cell voltage for the given conditions. The values of some modeling parameters are determined using experimental data through curve fitting. For validation purposes, in-house experimental studies are conducted. For this purpose, Pt50Ru25Pd25/C, Pt40Ru40Pd20/C, and Pt50Pd50/C anode catalysts are synthesized by the microwave method. The effects of these synthesized catalysts and the operating conditions (cell temperature, the molar ratio of dimethyl ether, and water) on the DDMEFC performance are discussed by comparing the activation and ohmic polarization as well as the polarization curves using the model developed. This cell-level modeling approach could be considered as a preliminary step in the design process of a DDMEFC stack.Article Citation - WoS: 45Citation - Scopus: 46Carbon Nanotube-Graphene Supported Bimetallic Electrocatalyst for Direct Borohydride Hydrogen Peroxide Fuel Cells(Pergamon-elsevier Science Ltd, 2021) Uzundurukan, Arife; Akca, Elif Seda; Budak, Yagmur; Devrim, YilserAt present study, carbon nanotube-graphene (CNT-G) supported PtAu, Au and Pt catalysts were prepared by microwave-assisted synthesis method to investigate the direct liquid-fed sodium borohydride/hydrogen peroxide (NaBH4/H2O2) fuel cell performance. Prepared catalysts were characterized by TGA, XRD, TEM, ICP-OES, cyclic voltammetry and rotating disc electrode (RDE) voltammetry. The catalysts were tested in a single NaBH4/H2O2 fuel cell with 25 cm(2) active area to evaluate fuel cell performance. The effects of temperature and fuel concentration on fuel cell performance were examined to observed best operating conditions. As a result of direct NaBH4/H2O2 fuel cell experiments, maximum power densities of 139 mW/cm(2), 125 mW/cm(2) and 113 mW/cm(2) were obtained for PtAu/CNT-G, Au/CNT-G and Pt/CNT-G catalysts, respectively. PtAu/CNT-G catalyst showed the enhanced NaBH4/H2O2 fuel cell performance, which was higher than the Pt/CNT-G catalyst and Au/CNT-G catalyst at 50 degrees C. The enhanced NaBH4/H2O2 performance can be attributed to synergistic effects between Pt and Au particles on CNT-G support providing a better catalyst utilization and interaction. These results suggest that the prepared PtAu/CNT-G catalyst is a promising anode catalyst for NaBH4/H2O2 fuel cell application. (c) 2020 Elsevier Ltd. All rights reserved.Article Experimental Study and Theoretical Investigation of High Temperature Proton Exchange Membrane Fuel Cell Micro-Cogeneration Application(Turkish Soc thermal Sciences Technology, 2018) Devrim, Yilser; Ozgirgin Yapici, Ekin; Energy Systems EngineeringIn this study, a house hold micro-cogeneration system is designed using high temperature proton exchange membrane (HTPEM) fuel cell. HTPEM type fuel cells gain the highest interest lately, due to their advantages in terms of increasing efficiency and power quality, reducing harmful emissions and flexibility of operation with respect to the other fuels. The micro-cogeneration system involves producing both electrical energy and hot water and/or vapor together in an economical way, utilizing single fuel (HTPEM fuel cells) for household applications. During the operation of the fuel cell, for high efficiency and stable power production, the access heat of the stack should be removed constantly and the temperature of the stack should be held stable. Heat recovered from the designed innovative cooling system is used for acquiring energy for heating water. This way, thermal efficiency is almost doubled compared to simple cycle. In the scope of this study, 225 W HTPEM fuel cell stack is designed and tested at 160 degrees C operation temperature with hydrogen gas and air. During operation, for homogenous distribution of temperature among the cells, for a short start up period leading to a fast required steady state temperature and for constantly removing the access heat produced in the cell, the cell stack is cooled by using a cooling fluid (Heat Transfer Oil 32- Petrol Ofisi). Selection of insulation material type and thickness for the cell stack is done using natural convection and radiation loss calculations. For the most efficient operating conditions, micro-cogeneration system water inlet and exit temperatures, water and cooling fluid flow rates, convenient pipe diameter and pump power calculations are done to finalize the design. With the cogeneration system designed during the studies, by recovering the access heat of the insulated HTPEM cell stack, district water with initial temperature of 15-20 degrees C is heated around 50 degrees C. Data gathered during studies indicate that fuel cell micro-cogeneration application is highly viable.Article Citation - WoS: 83Citation - Scopus: 92Investigation of Micro-Combined Heat and Power Application of Pem Fuel Cell Systems(Pergamon-elsevier Science Ltd, 2018) Budak, Yagmur; Devrim, YilserThis study focuses on the investigating different working temperature effect on Proton Exchange Membrane Fuel Cell (PEMFC) stack performance, micro-combined heat and power (mu CHP) application and their simple payback time. LT-PEMFC and HT-PEMFC short stacks were designed and analyzed for 480 W net power output. Liquid cooling method was choosing for the cooling the PEMFC stacks due for efficient mu CHP applications. The experimental studies were carried out by using 13 cells HT-PEMFC and 6 cells LT-PEMFC short stacks and design parameters were determined. 1.2 kW PEMFCs with mu CHP systems with different working temperature were designed based on electrochemical data obtained from short stack testing. The proposed PEMFC systems can supply electric and hot water. The highest mu CHP system efficiency was calculated with a value of 92% for HT-PEMFC based system. The corresponding electrical and thermal efficiencies are 48% and 44%, respectively. In this study, two important parameters have been analyzing: efficiency and simple payback time. By using mu CHP application, both natural gas and H-2 based PEMFC systems SPT values are reduced.Conference Object Citation - WoS: 68Citation - Scopus: 81Seasonal and Yearly Wind Speed Distribution and Wind Power Density Analysis Based on Weibull Distribution Function(Pergamon-elsevier Science Ltd, 2015) Bilir, Levent; Imir, Mehmet; Devrim, Yilser; Albostan, AyhanWind energy, which is among the most promising renewable energy resources, is used throughout the world as an alternative to fossil fuels. In the assessment of wind energy for a region, the use of two-parameter Weibull distribution is an important tool. In this study, wind speed data, collected for a one year period between June 2012 and June 2013, were evaluated. Wind speed data, collected for two different heights (20 m and 30 m) from a measurement station installed in Atihm University campus area (Ankara, Turkey), were recorded using a data logger as one minute average values. Yearly average hourly wind speed values for 20 m and 30 m heights were determined as 2.9859 m/s and 3.3216 m/s, respectively. Yearly and seasonal shape (k) and scale (c) parameter of Weibull distribution for wind speed were calculated for each height using five different methods. Additionally, since the hub height of many wind turbines is higher than these measurement heights, Weibull parameters were also calculated for 50 m height. Root mean square error values of Weibull distribution functions for each height, derived using five different methods, show that a satisfactory representation of wind data is achieved for all methods. Yearly and seasonal wind power density values of the region were calculated using the best Weibull parameters for each case. As a conclusion, the highest wind power density value was found to be in winter season while the lowest value was encountered in autumn season. Yearly wind power densities were calculated as 39.955 (W/m(2)), 51.282 (W/m(2)) and 72.615 (W/m(2)) for 20 m, 30 m and 50 m height, respectively. The prevailing wind direction was also determined as southeast for the region. It can be concluded that the wind power density value at the region is considerable and can be exploited using small scale wind turbines. Copyright (C) 2015, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.Article Citation - WoS: 61Citation - Scopus: 73Evaluation of Sulfonated Polysulfone/Zirconium Hydrogen Phosphate Composite Membranes for Direct Methanol Fuel Cells(Pergamon-elsevier Science Ltd, 2017) Ozden, Adnan; Ercelik, Mustafa; Devrim, Yilser; Colpan, C. Ozgur; Hamdullahpur, FeridunDirect methanol fuel cell (DMFC) technology has advanced perceivably, but technical challenges remain that must be overcome for further performance improvements. Thus, in this study, sulfonated polysulfone/zirconium hydrogen phosphate (SPSf/ZrP) composite membranes with various sulfonation degrees (20%, 35%, and 42%) and a constant concentration of ZrP (2.5%) were prepared to mitigate the technical challenges associated with the use of conventional Nafion (R) membranes in DMFCs. The composite membranes were investigated through Scanning Electron Microscopy (SEM), Electrochemical Impedance Spectroscopy (EIS), Thermogravimetric Analysis (TGA), oxidative stability and water uptake measurements, and single cell testing. Comparison was also made with Nafion (R) 115. Single cell tests were performed under various methanol concentrations and cell temperatures. Stability characteristics of the DMFCs under charging and discharging conditions were investigated via 1200 min short-term stability tests. The response characteristics of the DMFCs under dynamic conditions were determined at the start-up and shut-down stages. Composite membranes with sulfonation degrees of 35% and 42% were found to be highly promising due to their advanced characteristics with respect to proton conductivity, water uptake, thermal resistance, oxidative stability, and methanol suppression. For the whole range of parameters studied, the maximum power density obtained for SPSf/ZrP-42 (119 mW cm (2)) was found to be 13% higher than that obtained for Nafion (R) 115 (105 mW cm (2)). (C) 2017 Elsevier Ltd. All rights reserved.Article Citation - WoS: 56Citation - Scopus: 64Development of 500 W Pem Fuel Cell Stack for Portable Power Generators(Pergamon-elsevier Science Ltd, 2015) Devrim, Yilser; Devrim, Huseyin; Eroglu, InciPolymer Electrolyte Membrane Fuel Cell (PEMFC) portable power generators are gaining importance in emergency applications. In this study, an air-cooled PEMFC stack was designed and fabricated for net 500 W power output. Gas Diffusion Electrodes (GDE's) were manufactured by ultrasonic spray coating technique. Stack design was based on electrochemical data obtained at 0.60 V was 0.5 A/cm(2) from performance tests of a single cell having the same membrane electrode assemblies (MEA) that had an active area of 100 cm(2). Graphite bipolar plates were designed and machined by serpentines type flow. The stack comprising of 24 cells was assembled with external fixing plates. The stack temperature was effectively regulated by the cooling fan based on on-off control system. A maximum power of 647 W was obtained from the stack. The PEMFC stack was stable during start-up and shutdown cycling testing for 7 days at 65 degrees C in H-2/air at a constant cell voltage. Copyright (c) 2015, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.Conference Object Citation - WoS: 86Citation - Scopus: 95Enhancement of Pem Fuel Cell Performance at Higher Temperatures and Lower Humidities by High Performance Membrane Electrode Assembly Based on Nafion/Zeolite Membrane(Pergamon-elsevier Science Ltd, 2015) Devrim, Yilser; Albostan, AyhanThis work reports the preparation of Nafion/zeolite composite membranes with different zeolite loading. The structure of the Nafion/zeolite composite membranes are investigated by Scanning Electron Microscopy (SEM), X-Ray Diffraction (XRD) and by thermogravimetric analysis (TGA). The introduction of zeolite particles into the Nafion matrix helps to improve the water uptake, proton conductivity and thermal stability of the nanocomposite membranes compared to the virgin Nafion membrane. The SEM analyses have proved the uniform and homogeneous distribution of zeolite in composite membranes. The composite membranes are tested in a single PEMFC with a 5 cm(2) active area operating at the temperature range of 75-120 degrees C and in humidified under 50% relative humidity (RH) and fully humidified conditions. Single PEMFC tests show that Nafion/zeolite composite membrane is more stable and also performed better than virgin Nafion membrane at low humidity condition. The results indicate the Nafion/zeolite composite membranes could be utilized as the proton exchange membranes for PEMFC. Copyright (C) 2015, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.
