15 results
Search Results
Now showing 1 - 10 of 15
Article Citation - WoS: 2Citation - Scopus: 2Performance Assessment of Anion Exchange Electrolyzer With PBI-BASED Membrane Through 0-D Modeling(Elsevier Ltd, 2025) Celebi, Ceren; Colpan, C. Ozgur; Devrim, YilserAnion exchange membrane (AEM) water electrolysis is emerging as a promising method for the sustainable production of hydrogen. A key advantage lies in the potential for cost-effective hydrogen production by substituting expensive noble metal electrocatalysts with affordable transition metals. This work presents a 0-D mathematical model for evaluating the performance of AEMWEs, with a particular focus on polybenzimidazole (PBI)-based membranes, which are renowned for their high thermal stability, chemical resistance and excellent conductivity in alkaline media. The objective of the model is to predict the behavior of membranes in AEMWE systems, and it has been employed to evaluate the performance of a range of PBI membranes. To ensure precision, the values were meticulously selected from the literature, in accordance with the experimental conditions. Furthermore, IR-corrected validation was incorporated to isolate the impact of membrane conductivity on performance, thereby facilitating a dependable assessment of PBI membranes under diverse conditions. The model considers the effects of electrolyte resistance and bubble formation on cell voltage behavior. The efficiency was evaluated on the basis of the higher heating value (HHV). The findings demonstrate that one membrane exhibits consistent efficiency across a broad temperature range (40-90 degrees C), whereas the other displays notable variability under diverse conditions. In particular, the efficiency of the electrolyzer is significantly enhanced by the use of thinner membranes and higher temperatures. The highest efficiencies obtained were 83.9% and 79.8% for 25 mu m and 50 mu m PBI/Polystyrene membrane under the operating conditions of 1 M KOH solution at 80 degrees C and current density of 2 A/cm2. This study aims to provide valuable information on the performance of PBI membranes through a zero-dimensional model validated by experimental data.Article Citation - WoS: 3Citation - Scopus: 3A Review on Membranes for Anion Exchange Membrane Water Electrolyzers(Pergamon-Elsevier Science Ltd, 2026) Altinisik, Hasan; Celebi, Ceren; Ozden, Adnan; Devrim, Yilser; Colpan, C. OzgurAnion exchange membrane water electrolyzers (AEMWEs) - using water and renewable electricity as the input - provide a sustainable pathway to hydrogen production. AEMWEs perform the cathodic hydrogen evolution reaction (HER) and anodic oxygen evolution reaction (OER) with modest overpotentials at practical current densities (>1 A cm(-2)). The recent catalysis, component, and system-level breakthroughs have enabled significant improvements in current densities and energetic efficiencies. The challenge, however, is to maintain these impressive activities and efficiencies through long-term operation at scale. High-performance, efficient, stable, and economically viable AEMWEs require high-performance, low-cost, and scalable anion exchange membranes (AEMs). This Review provides an overview of physical, chemical, and transport properties of commercial and non-commercial AEMs. The article discusses the operating principles, structures, characteristics, strengths, and weaknesses of conventional and emerging AEMs, along with their performance and stability implications in AEMWEs. The article highlights the characteristics that have intricate implications on performance, stability, and cost. It discusses recent advances and best practices to combine high-performance, efficiency, stability, and low-cost in a single AEM structure. The Review highlights the trade-offs between AEM characteristics, with an overview of emerging approaches that would overcome performance, stability, and cost challenges. The Review concludes by highlighting the research gaps and providing research directions with the potential to take the technology a step closer to wide-scale deployment.Article Citation - WoS: 61Citation - Scopus: 73Evaluation of Sulfonated Polysulfone/Zirconium Hydrogen Phosphate Composite Membranes for Direct Methanol Fuel Cells(Pergamon-elsevier Science Ltd, 2017) Ozden, Adnan; Ercelik, Mustafa; Devrim, Yilser; Colpan, C. Ozgur; Hamdullahpur, FeridunDirect methanol fuel cell (DMFC) technology has advanced perceivably, but technical challenges remain that must be overcome for further performance improvements. Thus, in this study, sulfonated polysulfone/zirconium hydrogen phosphate (SPSf/ZrP) composite membranes with various sulfonation degrees (20%, 35%, and 42%) and a constant concentration of ZrP (2.5%) were prepared to mitigate the technical challenges associated with the use of conventional Nafion (R) membranes in DMFCs. The composite membranes were investigated through Scanning Electron Microscopy (SEM), Electrochemical Impedance Spectroscopy (EIS), Thermogravimetric Analysis (TGA), oxidative stability and water uptake measurements, and single cell testing. Comparison was also made with Nafion (R) 115. Single cell tests were performed under various methanol concentrations and cell temperatures. Stability characteristics of the DMFCs under charging and discharging conditions were investigated via 1200 min short-term stability tests. The response characteristics of the DMFCs under dynamic conditions were determined at the start-up and shut-down stages. Composite membranes with sulfonation degrees of 35% and 42% were found to be highly promising due to their advanced characteristics with respect to proton conductivity, water uptake, thermal resistance, oxidative stability, and methanol suppression. For the whole range of parameters studied, the maximum power density obtained for SPSf/ZrP-42 (119 mW cm (2)) was found to be 13% higher than that obtained for Nafion (R) 115 (105 mW cm (2)). (C) 2017 Elsevier Ltd. All rights reserved.Article Citation - WoS: 9Citation - Scopus: 10Investigation of the Performance of High-Temperature Electrochemical Hydrogen Purification From Reformate Gases(Wiley, 2022) Durmus, Gizem Nur Bulanik; Durmuş, Gizem Nur Bulanık; Colpan, C. Ozgur; Devrim, Yilser; Devrim, Yılser; Durmuş, Gizem Nur Bulanık; Devrim, Yılser; Mechanical Engineering; Energy Systems Engineering; Mechanical Engineering; Energy Systems EngineeringIn the present work, the purification of hydrogen from a hydrogen/carbon dioxide/carbon monoxide (H-2:CO2:CO) mixture by a high-temperature electrochemical purification (HT-ECHP) system is examined. Electrochemical H-2 purification experiments were carried out in the temperature range of 140-180 degrees C. The effects of the molar ratio of the gases in the mixture (H-2:CO2:CO-75:25:0, H-2:CO2:CO-72:26:2,0 H-2:CO2:CO-75:22:3, H-2:CO2:CO-75:20:5, H-2:CO2:CO-97:0:3, H-2:CO2:CO-95:0:5) and the operating temperature on the electrochemical H-2 separation were investigated. As a result of the electrochemical H-2 purification experiments, it was determined that the operating temperature is the most important parameter affecting the performance. According to the results obtained, H-2 purity of 99.999% was achieved at 160 degrees C with the reformate gas mixture containing 72% H-2, 26% CO2, and 2% CO by volume. According to the polarization curves of the gas mixtures containing CO, high current densities at low voltage were reached at 180 degrees C, and it was observed that the performance increased as the temperature increased, whereas the gas mixture without CO gave the best performance at 160 degrees C.Article Mathematical Modeling of a Direct Dimethyl Ether Fuel Cell(Wiley-hindawi, 2022) Alpaydin, Guvenc Umur; Durmus, Gizem Nur Bulanik; Colpan, C. Ozgur; Devrim, YilserIn this study, a mathematical model of a direct dimethyl ether fuel cell (DDMEFC) is developed to examine the effect of operating conditions on voltage losses and cell performance. In modeling, the electrochemical relations and mass balances are used to find the cell voltage for the given conditions. The values of some modeling parameters are determined using experimental data through curve fitting. For validation purposes, in-house experimental studies are conducted. For this purpose, Pt50Ru25Pd25/C, Pt40Ru40Pd20/C, and Pt50Pd50/C anode catalysts are synthesized by the microwave method. The effects of these synthesized catalysts and the operating conditions (cell temperature, the molar ratio of dimethyl ether, and water) on the DDMEFC performance are discussed by comparing the activation and ohmic polarization as well as the polarization curves using the model developed. This cell-level modeling approach could be considered as a preliminary step in the design process of a DDMEFC stack.Article Citation - WoS: 26Citation - Scopus: 27Performance of an Ht-Pemfc Having a Catalyst With Graphene and Multiwalled Carbon Nanotube Support(Wiley, 2019) Alpaydin, Guvenc Umur; Devrim, Yilser; Colpan, C. OzgurIn this study, the effect of multiwalled carbon nanotube and graphene nanoplatelet-based catalyst supports on the performance of reformate gas-fed polybenzimidazole (PBI)-based high-temperature proton exchange membrane fuel cell (HT-PEMFC) was investigated. In addition, the effect of several microwave conditions on the performance of the Pt-Ru/multiwalled carbon nanotube (MWCNT)-graphene nanoplatelet (GNP) catalyst was assessed. Through X-ray diffraction, thermal gravimetric analysis, transmission electron microscopy, scanning electron microscopy, and energy dispersive spectroscopy, the catalysts' chemical structure and morphology were characterized. Cyclic voltammetry analysis was used for the electrochemical characterization of catalysts through an electrochemical cell with three electrodes connected to a potentiostat. The results showed that the best performing catalyst is the catalyst produced using 800-W power for 40 seconds. The electrochemically active surface area values of this catalyst ranged from 54 to 45 m(2)/g. Single-cell performance tests of the HT-PEMFC were then carried out. In these tests, reformate gas mixture, consisting of H-2, CO2, and CO, was fed to the anode side at 160 degrees C without humidification. These tests for the best performing catalyst yielded peak power density of 0.280 W/cm(2) and current density (at 0.6 V) of 0.180 A/cm(2) in the H-2/air environment and peak power density of 0.266 W/cm(2) and current density (at 0.6 V) of 0.171 A/cm(2) in the reformate gas/air environment. As a result of the experiments, it was found that Pt-Ru/MWCNT-GNP hybrid material is a suitable catalyst for HT-PEMFC.Conference Object Optimization of modeling parameters of of a direct dimethyl ether fuel cell (DDMEFC)(Ieee, 2019) Alpaydin, Guvenc Umur; Colpan, C. Ozgur; Devrim, YilserDirect alcohol fuel cells are one of the suitable candidates for sustainable power generation in portable applications. Among the different alcohol types that can be used in these fuel cells, DME, which is almost non-toxic at room temperature and easy to liquefy, and has a molecular structure similar to methanol, is one of the suitable options. For this reason, many studies have been carried out to develop direct dimethyl ether fuel cell (DDMEFC). Mathematical modeling studies also play an important role in the development of DDMEFC since they enable the understanding of the performance of the fuel cells more thoroughly. In this study, a model has been developed by using the principles of conservation chemical species and electrochemistry. A modeling study was performed using MATLAB. The values of some modeling parameters were estimated using the genetic algorithm optimization technique.Conference Object Citation - WoS: 28Citation - Scopus: 34Enhancement of Direct Methanol Fuel Cell Performance Through the Inclusion of Zirconium Phosphate(Pergamon-elsevier Science Ltd, 2017) Ozden, Adnan; Ercelik, Mustafa; Ozdemir, Yagmur; Devrim, Yilser; Colpan, C. OzgurNafion/zirconium hydrogen phosphate (ZrP) composite membranes containing 2.5 wt.% ZrP (NZ-2.5) or 5 wt.% ZrP (NZ-5) were prepared to improve the performance of a direct methanol fuel cell (DMFC). The influence of ZrP content on the Nafion matrix is assessed through characterization techniques, such as Thermogravimetric Analysis (TGA), X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Electrochemical Impedance Spectroscopy (EIS), and water uptake measurement. Performance testings of the DMFCs based on these composite membranes as well as commercial Nafion (R) 115 membrane were performed using a computer aided fuel cell test station for different values of cell temperature (40 degrees C, 60 degrees C, 80 degrees C, and 100 degrees C) and methanol concentration (0.75 M, 1.00 M, and 1.50 M). Characterization studies indicated that incorporation of ZrP into polymer matrix enhanced the water uptake and proton conductivity values of Nafion membrane. The results of the performance tests showed that the Membrane Electrode Assembly (MEA) having NZ-2.5 provided the highest performance with the peak power density of 551.52 W/m(2) at 100 degrees C and 1.00 M. Then, the performances of the MEAs having the same NZ-2.5 membrane but different cathode catalysts were investigated by fabricating two different MEAs using cathode catalysts made of Pt/C-ZrP and Pt/C (HiSPEC (R) 9100). According to the results of these experiments, the MEA having NZ-2.5 membrane and Pt/C (HiSPEC (R) 9100) cathode catalyst containing 10 wt.% of ZrP exhibited the highest performance with the peak power density of 620.88 W/m(2) at 100 degrees C and 1.00 M. In addition, short-term stability tests were conducted for all the MEAs. The results of the stability tests revealed that introduction of ZrP to commercial (HiSPEC (R) 9100) cathode catalyst improves its stability characteristics. (C) 2017 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.Article Citation - WoS: 8Citation - Scopus: 8Experimental and Modeling Studies of a High-Temperature Electrochemical Hydrogen Compressor(Pergamon-elsevier Science Ltd, 2024) Durmus, Gizem Nur Bulanik; Kuzu, Cemil; Devrim, Yilser; Colpan, C. OzgurSome non-technical factors such as economics and logistics prevent hydrogen (H2) tech-nologies from becoming more widespread in daily life. Today, the prevalence of H2 tech-nologies requires new technological developments. Electrochemical hydrogen compressors (ECHC) are of great interest due to their ability to pressurize and purify in one step. In this study, the electrochemical H2 compression performance of high phosphoric acid (PA) doped poly 2,2-m-phenylene-5,5-benzimidazole (PBI) membrane-based HT-ECHC under high temperature and non-humid conditions was investigated through both an experimental and a numerical approach. The H2 compression capacity of HT-ECHC at different operating voltages was examined by performance tests at 160 degrees C, and it was determined that the electrochemical compression performance increased with increasing operating voltage. It was observed that the current density values also increased with increasing voltage, and it was determined that a current density of 61.2 A was obtained at 1 V. As a result of the tests, H2 was successfully compressed from atmospheric pressure to 60 bar by HT-ECHC without any gas leakage. The results of the developed model were compared with the experimental performance test data, and the variation of molar flow, cell voltage, and cell efficiency over time was examined. It has been determined that the back diffusion from the cathode to the anode in the cell increases with the increasing operating voltage of HT-ECHC and therefore the cell efficiency decreases. It has been evaluated that the developed model and experimental results are in good agreement. (c) 2023 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.Conference Object Citation - WoS: 34Citation - Scopus: 39Development of a One-Dimensional and Semi-Empirical Model for a High Temperature Proton Exchange Membrane Fuel Cell(Pergamon-elsevier Science Ltd, 2018) Nalbant, Yagmur; Colpan, C. Ozgur; Devrim, YilserHigh temperature proton exchange membrane fuel cells (HT-PEMFC), which operate between 160 degrees C and 200 degrees C, can be generally used in portable and stationary power generation applications. In this study, a one-dimensional, semi-empirical, and steady-state model of a HT-PEMFC fed with a gas mixture consisting of hydrogen and carbon monoxide is developed. Some modeling parameters are adjusted using empirical data, which are obtained conducting experiments on a HT-PEMFC for different values of Pt loading and cell temperature. For adjusting these parameters, the total summation of the square of the difference between the cell voltages found using the experimental and theoretical methods is minimized using genetic algorithm. After finding the values of the adjusted parameters, the effects of different cell temperature, Pt loading, phosphoric acid (PA) percentage, and different binders (PBI and PVDF) on the performance of the fuel cell are examined. It was found that, the performance of the fuel cell using PVDF binder exhibited better performance as compared to that using PBI binder. (c) 2017 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
