9 results
Search Results
Now showing 1 - 9 of 9
Article Citation - WoS: 24Citation - Scopus: 25A Novel Conducting Polymer Based on Terthienyl System Bearing Strong Electron-Withdrawing Substituents and Its Electrochromic Device Application(Elsevier Science Sa, 2008) Asil, Demet; Cihaner, Atilla; Algi, Fatih; Onal, Ahmet M.A novel conducting polymer bearing strong electron-withdrawing substituents (EWS) directly attached to the 3,4-positions of the thiophene ring was synthesized by electrochemical polymerization of diethyl 2,5-di(thiophen-2-yl)thiophene-3,4-dicarboxylate (SSS-Diester). The polymer (PSSS-Diester) was characterized by cyclic voltammetry, FT-IR and UV-vis spectroscopy. The polymer has a reversible redox process and demonstrates a stable electrochromic behavior: reddish orange in the neutral state, brown in the intermediate state and green in the oxidized state. Optical density and response time of the dual-type electrochromic device based on PSSS-Diester were found to be 0.23 and 0.6 s at 623 nm, respectively. It is also noteworthy that the device shows good environmental and redox stability (i.e. 94% of the optical activity of the device retained after 500th switch). (c) 2008 Elsevier B.V. All rights reserved.Article Citation - WoS: 6Citation - Scopus: 6Anodic Oxidation of N-Substituted Dipyrrolyl Linked by Polyether Bridge(Taylor & Francis inc, 2006) Cihaner, AtillaElectroactive polymer containing polyether pseudo-cages has been synthesized by anodic oxidation of 1,11-bis(1,1-pyrrole)-3,6,9-trioxaundecane (I) using acetonitrile (ACN) as solvent and tetrabutylammonium perchlorate (TBAClO 4 ) as supporting electrolyte. Electrochemical behavior of monomer I and its polymer, poly-I , were studied using cyclic voltammetry (CV) and UV-VIS spectroscopic techniques. Also, a doping/dedoping study was carried out using electron spin resonance (ESR) and UV-VIS spectroscopic techniques. Thermal behavior of the product was studied using differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA).Article Citation - WoS: 1Citation - Scopus: 1Spectroelectrochemical Investigation of the Anodic Oxidation of Dibenzo-18(Elsevier Science Sa, 2004) Cihaner, A; Önal, AMPoly(dibenzo-18-crown-6) (poly-DB18C6) was synthesized by electrochemical oxidation of dibenzo-18-crown-6 (DB18C6) using a mixture of acetonitrile and dichloromethane as the solvent and tetrabutylammonium tetrafluoroborate (TBABF(4)) or tetrabutylammonium hexafluorophosphate (TBAPF(6)) as supporting electrolyte. The anodic polymerization of DB18C6 was investigated using in situ ESR and in situ UV-Vis spectroscopic techniques. Spectroelectrochemical (SPEL), properties and thermal analysis of the resulting polymers have been investigated using UV-Vis spectroscopy, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). (C) 2004 Elsevier B.V. All rights reserved.Article Citation - WoS: 6Citation - Scopus: 6Synthesis and Polymerization of 2-And 3-Substituted Thiophene Derivatives Linked by Polyether Bridges(Elsevier Science Sa, 2004) Tirkes, S; Cihaner, A; Önal, AMNew compounds consisting of 2- and 3-thienyl units linked by polyether bridges have been synthesized and their electrochemical polymerization was performed via constant potential electrolysis (CPE) in an electrolytic solution containing 0.1 M tetrabutylammonium hexafluorophosphate (TBAPF(6)) dissolved in CH3CN. 2-Thienyl monomers (I and II), but not 3-thienyl monomers (III and IV), were also polymerized via chemical oxidation, which yielded broken pi-conjugated polymer products. The polymers were characterized using H-1 NMR and FT-IR spectroscopic techniques. It was found that both chemical and electrochemical oxidation of 2-thienyl monomers gave mainly poly(2,2'-bithiophenemethylene) due to elimination of polyether chains during the polymerization reaction. On the other hand, electrochemical oxidation of 3-thienyl monomers resulted in corresponding polymers without any cleavage of polyether bridges. Spectroelectrochemical (SPEL) properties of the products were investigated using UV-Vis spectroscopic techniques. (C) 2004 Elsevier B.V. All rights reserved.Article Citation - WoS: 65Citation - Scopus: 67An Electrochromic and Fluorescent Polymer Based on 1-(1(Elsevier Science Sa, 2008) Cihaner, Atilla; Algi, FatihA novel polymer was synthesized by electrochemical polymerization of 1-(1-naphthyl)-2,5-di-2-thienyl-1H-pyrrole (SNS-1-NAPH). The corresponding polymer (PSNS-1-NAPH) was characterized by cyclic voltammetry, FT-IR and UV-vis spectroscopy. The polymer has a very well-defined and reversible redox process in both organic and aqueous solutions. Furthermore, it shows stable electrochromic behavior; yellow in the neutral state, green in the intermediate state and violet in the oxidized state. PSNS-1-NAPH is soluble in common solvents. Although SNS-1-NAPH is almost nonfluorescent, its polymer is a yellow and/or green light emitter. (c) 2007 Elsevier B.V. All rights reserved.Article Citation - WoS: 5Citation - Scopus: 5Electrochemical Polymerization of Para-Substituted Haloanilines(Taylor & Francis inc, 2006) Cihaner, A; Önal, AMPolyhaloanilines: poly(4-fluoroaniline) (P4FAN), poly(4-chloroaniline) (P4CAN), and poly(4-bromoaniline) (P4BAN), are synthesized from para-substituted haloaniline monomers; 4-fluoroaniline (4FAN), 4-chloroaniline (4CAN), and 4-bromoaniline (4BAN), respectively, via constant potential electrolysis (CPE) in acetonitrile-water mixture (1:1 v/v) with NaClO4 as supporting electrolyte. Prior to CPE, electrochemical behavior of the monomers were investigated in organic medium utilizing cyclic voltammetry (CV). The course of CPE was monitored using in-situ UV-VIS spectroscopic technique. Characterization of polymer products have been carried out using FT-IR and NMR spectroscopic techniques and thermal behaviors were studied using differential scanning calorimeter (DSC). Polyhaloanilines synthesized by electrochemical oxidation were doped using iodine and the change in the paramagnetic behavior was monitored by ESR, UV-VIS, and FT-IR.Article Citation - WoS: 7Citation - Scopus: 9Electrochemical Copolymerization of 2-Substituted Thiophene Derivative Linked by Polyether Bridge With Thiophene(Elsevier Science Sa, 2005) Cihaner, A; Önal, AMNew conducting copolymers have been synthesized via electrochemical oxidation of thiophene (Th) in the presence of monomer bis(2-thienyl)ethyl (1). Cyclic voltammetry (CV) studies showed that the presence of monomer I in the electrolytic solution greatly changes the CV behaviour of the formation of the polythiophene films. It is found that the increasing ratio of I was found to decrease electroactivity of copoly(I-Th). Electrochemical synthesis of copolymer films was achieved via constant potential electrolysis (CPE) in an electrolytic solution containing 0.1 M tetrabutylammonium hexafluorophosphate (TBAPF(6)) dissolved in CH3CN. Spectroelectrochemical (SPEL) properties of the films were investigated using UV-vis spectroscopic technique. (C) 2005 Elsevier B.V. All rights reserved.Article Citation - WoS: 11Citation - Scopus: 14Electrochemical Synthesis of New Conducting Copolymers Containing Pseudo-Polyether Cages With Pyrrole(Elsevier Science Sa, 2007) Cihaner, AtillaConducting copolymers have been synthesized via electrochemical oxidation of pyrrole (Py) in the presence of monomer 1, 11 -bis(1,1-pyrrole)-3,6,9-trioxaundecane (I) in an electrolytic solution containing 0.1 M tetrabutylammonium hexafluorophosphate (TBAPF(6)) dissolved in acetonitrile. It is observed that reversible redox behavior of poly(I-co-Py)s shifts to more positive potentials with the increasing amount of I in the comonomer mixture, indicating formation of a copolymer. It is also found that increasing the ratio of I in the comonomer mixture decreases the conductivity of the obtained polymer films. The dark electrical conductivity measurements in the temperature range of 300-100 K revealed the extrinsic type of conduction with activation energy values being in the range of 82.3-16.9 meV. (c) 2007 Elsevier B.V. All rights reserved.Article Citation - WoS: 28Citation - Scopus: 31Electrochemical Polymerization of 9-Fluorenone(Elsevier Science Sa, 2004) Cihaner, A; Tirkes, S; Önal, AMElectrochemical polymerization of 9-fluorenone, FO, was studied in CH2Cl2 solution with tetrabutylammonium tetrafluoroborate, TBABF(4), as the electrolyte, via constant potential electrolysis, CPE. Prior to CPE, the redox behavior of FO was investigated in the same solvent/electrolytic medium using cyclic voltammetry, CV. CPE of FO yielded an insoluble polymer deposit on the electrode surface. The product was characterized by FTIR spectroscopy techniques. The redox and spectroelectrochernical, SPEL, behavior of the polymer were studied by CV and in situ UV-Vis spectrophotometric techniques at various potentials, respectively. The conductivity was measured using a two-probe technique and the paramagnetic behavior of the polymer was monitored using in situ ESR spectroscopy. (C) 2004 Elsevier B.V. All rights reserved.
