GCRIS :: Search

Search Results

Now showing 1 - 10 of 23

Citation - WoS: 7
Citation - Scopus: 7
Physical Design and Dynamical Analysis of Resonant-Antiresonant Ag/MgO/GaSe/Al Optoelectronic Microwave Devices
(Springer, 2015) Kmail, Renal R. N.; Qasrawi, A. F.
In this work, the design and optical and electrical properties of MgO/GaSe heterojunction devices are reported and discussed. The device was designed using 0.4-mu m-thick n-type GaSe as substrate for a 1.6-mu m-thick p-type MgO optoelectronic window. The device was characterized by means of ultraviolet-visible optical spectrophotometry in the wavelength region from 200 nm to 1100 nm, current-voltage (I-V) characteristics, impedance spectroscopy in the range from 1.0 MHz to 1.8 GHz, and microwave amplitude spectroscopy in the frequency range from 1.0 MHz to 3.0 GHz. Optical analysis of the MgO/GaSe heterojunction revealed enhanced absorbing ability of the GaSe below 2.90 eV with an energy bandgap shift from 2.10 eV for the GaSe substrate to 1.90 eV for the heterojunction design. On the other hand, analysis of I-V characteristics revealed a tunneling-type device conducting current by electric field-assisted tunneling of charged particles through a barrier with height of 0.81 eV and depletion region width of 670 nm and 116 nm when forward and reverse biased, respectively. Very interesting features of the device are observed when subjected to alternating current (ac) signal analysis. In particular, the device exhibited resonance-antiresonance behavior and negative capacitance characteristics near 1.0 GHz. The device quality factor was similar to 10(2). In addition, when a small ac signal of Bluetooth amplitude (0.0 dBm) was imposed between the device terminals, the power spectra of the device displayed tunable band-stop filter characteristics with maximum notch frequency of 1.6 GHz. The energy bandgap discontinuity, the resonance-antiresonance behavior, the negative capacitance features, and the tunability of the electromagnetic power spectra at microwave frequencies nominate the Ag/MgO/GaSe/Al device as a promising optoelectronic device for use in multipurpose operations at microwave frequencies.
Citation - WoS: 2
Citation - Scopus: 2
Characterization of the Mgo/Gase_{0.5< Heterojunction Designed for Visible Light Communications}
(Elsevier Sci Ltd, 2015) Qasrawi, A. F.; AlGarni, S. E.; Gasanly, N. M.
In this study an optoelectronic design is reported and characterized. The device is made of p-type MgO solved in sodium silicate binder and n-type GaSe0.5S0.5 heterojunction. It is described by means of X-ray diffraction, optical absorption and reflection in the incident light wavelength range of 190-1100 nm and by means of dark and 406 nm laser excited current (I)-voltage (V) characteristics. The optical reflectance was also measured as a function of angle of incidence of light in the range of 35-80. The structural analysis revealed no change in the existing phases of the device composers. In addition, it was observed that for pure sodium silicate and for a 67% content of MgO solved in sodium silicate binder (33%), the heterojunction exhibits a valence band shift of 0.40 and 0.70 eV, respectively. The painting of MgO improved the light absorbability significantly. On the other hand, the angle-dependent reflectance measurements on the crystal displayed a Brewster condition at 70. The MgO/ GaSe0.5S0.5 heterojunction exhibited no Brewster condition when irradiated from the MgO side. Moreover, for the crystal and the MgO/ GaSe0.5S0.5 heterojunction, the dielectric spectral analysis revealed a pronounced increase in the quality factor of the device. The I-V characteristics of the device revealed typical optoelectronic properties with high photo-response that could amplify the dark current 24 times when irradiated with 5 mW power laser light. The structural, optical, dielectric and electrical features of the MgO/GaSe0.5S0.5 heterojunction nominate it for use in visible light communication technology. (C) 2015 Elsevier Ltd. All rights reserved.
Citation - WoS: 15
Citation - Scopus: 17
Dielectric Dispersion in Ga₂s_{3< Thin Films}
(Springer, 2017) Alharbi, S. R.; Qasrawi, A. F.
In this work, the structural, compositional, optical, and dielectric properties of Ga2S3 thin films are investigated by means of X-ray diffraction, scanning electron microscopy, energy dispersion X-ray analysis, and ultraviolet-visible light spectrophotometry. The Ga2S3 thin films which exhibited amorphous nature in its as grown form are observed to be generally composed of 40.7 % Ga and 59.3 % S atomic content. The direct allowed transitions optical energy bandgap is found to be 2.96 eV. On the other hand, the modeling of the dielectric spectra in the frequency range of 270-1,000 THz, using the modified Drude-Lorentz model for electron-plasmon interactions revealed the electrons scattering time as 1.8 (fs), the electron bounded plasma frequency as similar to 0.76-0.94 (GHz) and the reduced resonant frequency as 2.20-4.60 x10(15) (Hz) in the range of 270-753 THz. The corresponding drift mobility of electrons to the terahertz oscillating incident electric field is found to be 7.91 (cm (2)/Vs). The values are promising as they nominate the Ga2S3 thin films as effective candidates in thin-film transistor and gas sensing technologies.
Citation - WoS: 9
Citation - Scopus: 9
Effect of Ytterbium, Gold and Aluminum Transparent Metallic Substrates on the Performance of the Ga₂s_{3< Thin Film Devices}
(Elsevier Science Bv, 2017) Alharbi, S. R.; Qasrawi, A. F.
In the current work, the structural, optical, dielectric and electrical properties of the Ga2S3 thin films which are deposited onto transparent thin Al, Yb and Au metal substrates are characterized by means of transmittance electron microscopy, X-ray diffraction, ultraviolet visible light spectroscopy and impedance spectroscopy techniques. The effects of the metallic substrates on the crystalline nature, energy band gap and dielectric spectra are also investigated. The modeling of the dielectric spectra allowed determining the effect of the Al, Yb and Au thin layers on the electron scattering time, the plasmon frequency, free electron density and drift mobility. In addition, a Yb/Ga2S3/Au Schottky barrier and All Ga2S3/Au back to back Schottky barrier devices (metal-semiconductor-metal (MSM) device) are fabricated and characterized by means of capacitance-voltage characteristics and capacitance and conductance spectra in the frequency range of 10-1800 MHz. While the Schottky barrier device displayed three distinct positions of resonance-antiresonance phenomena, the MSM device displayed one peak with narrow bandwidth of 10 MHz. The MSM devices exhibited an inversion, depletion and accumulation modes within a voltage range of 0.25 V width at 250 MHz. The study indicates the applicability of these device as smart capacitive switches, as Plasmon devices and as wavetraps. (C) 2017 Elsevier B.V. All rights reserved.
Citation - WoS: 7
Citation - Scopus: 7
Plasmon-Electron Dynamics at the Au/Inse and Y/Inse Interfaces Designed as Dual Gigahertz-Terahertz Filters
(Elsevier Gmbh, Urban & Fischer verlag, 2017) Alharbi, S. R.; Qasrawi, A. F.
In this work, the X-ray diffraction, the Scanning electron microscopy, the energy dispersive X-ray, the Raman, The UV-vis light and the impedance spectral techniques are employed to explore the structural, vibrational, optical and electrical properties of the Au/InSe and Y/InSe thin film interfaces. It was shown that with its amorphous nature of crystallization, the InSe thin films exhibited n-type conductivity due to the 3% excess selenium. For this form of InSe, the only active Raman spectral line is 121 (cm(-1)). In addition to the design of the energy band diagram, the analysis the dielectric spectra and the optical conductivities were possible in the frequency range of 270-1000 THz. The modeling of the optical conductivities of the Au, Y, Au/InSe and Y/InSe with the help of Lorentz approach for optical conduction, assured that the conduction is dominated by the resonant plasmon-electron interactions at the metals and metals/semiconductors interfaces. It also allowed tabulating the necessary parameters for possible applications in terahertz technology: These parameters are the electron effective masses, the free electron densities, the electron bounded plasmon frequencies, the electron scattering times, the reduced resonant frequencies and the drift mobilities. On the other hand, the impedance spectral analysis of the Y/InSe/Au interfaces in the frequency range of 0.01-1.80 GHz, revealed negative capacitance effect associated with band filter features that exhibit maximum transition line at 1.17 GHz. This value nominates the interface as a member of filter classes in the gigahertz technology. (C) 2017 Elsevier GmbH. All rights reserved.
Citation - WoS: 7
Citation - Scopus: 7
Design of the Zns/Ge pn Interfaces as Plasmonic, Photovoltaic and Microwave Band Stop Filters
(Elsevier Science Bv, 2017) Alharbi, S. R.; Qasrawi, A. F.
In the current work, we report and discuss the features of the design of a ZnS (300 nm)/Ge (300 nm)/GaSe (300 nm) thin film device. The device is characterized by the X-ray diffraction, electron microscopy, energy dispersive X-ray spectroscopy (EDS), optical spectroscopy, microwave power spectroscopy and light power dependent photoconductivity. While the X-ray diffraction technique revealed a polycrystalline ZnS coated with two amorphous layers of Ge and GaSe, the hot probe tests revealed the formation of pn interface. The optical spectra which were employed to reveal the conduction and valence band offsets at the ZnS/Ge and Ge/GaSe interface indicated information about the dielectric dispersion at the interface. The dielectric spectra of the ZnS/Ge/GaSe heterojunction which was modeled assuming the domination of surface plasmon interactions through the films revealed a pronounced increase in the drift mobility of free carriers in the three layers compared to the single and double layers. In the scope of the fitting parameters, a wave trap that exhibit filtering properties at notch frequency of 2.30 GHz was designed and tested. The ac signals power spectrum absorption reached similar to 99%. In addition, the photocurrent analysis on the ZnS/Ge/GaSe interface has shown it is suitability for photovoltaic and photosensing applications. (C) 2017 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license
Citation - WoS: 4
Citation - Scopus: 4
Band Offsets and Optical Conduction in the Cdse/Gase Interface
(Elsevier Science Bv, 2016) Kayed, T. S.; Qasrawi, A. F.; Elsayed, Khaled A.
In this work, the design and characterization of CdSe/GaSe heterojunction is considered. The CdSe/GaSe thin film interface was prepared by the physical vapor deposition technique. Systematic structural and optical analysis were performed to explore the crystalline nature, the optical band gaps, the conduction and valence band offsets, the dielectric spectra, and the frequency dependent optical conductivity at terahertz frequencies. The X-ray diffraction analysis revealed a polycrystalline interface that is mostly dominated by the hexagonal CdSe oriented in the (002) direction. It was also found that the CdSe/GaSe interface exhibits conduction and valence band offsets of 1.35 and 1.23/1.14 eV, respectively. The dielectric spectra displayed two dielectric resonance peaks at 530 and 445 THz. Moreover, the computational fittings of the optical conductivity of the interface revealed a free carrier scattering time of 0.41 (fs) for a free carrier density of 7.0 x 10(18) (cm(-3)). The field effect mobility for the CdSe/GaSe interface was found to be 5.22 (cm(2)/Vs). The remarkable features of this device having large band offsets and qualitative optical conduction dominated by a scattering time in the order of femtoseconds in addition to the dielectric property nominate the device to be used in optoelectronic technology. (C) 2016 Elsevier B.V. All rights reserved.
Citation - WoS: 1
Citation - Scopus: 1
Characterization of the Nanosandwiched Ga₂s_{3< Interfaces as Microwave Filters and Thermally Controlled Electric Switches}
(Elsevier Gmbh, 2018) Alharbi, S. R.; Nazzal, Eman O.; Qasrawi, A. F.
In this work, an indium layer of 50 nm thicknesses is sandwiched between two 500 nm thick Ga2S3 layers. The effect of indium nansandwiching on the composition, structure, morphology, light absorbability, capacitance and reactance spectra, and temperature dependent electrical conductivity of the Ga2S3 films are investigated by means of X-ray diffraction, scanning electron microscopy, energy dispersion X-ray spectroscopy, Raman spectroscopy, visible light spectrophotometry, impedance spectroscopy and current voltage characteristics. While the nansandwiched films are observed to exhibit an amorphous nature of structure with indium content of Owing to the nucleation mechanisms that take place during the film growth, the accumulation of some unit cells in groups to form grains should be a significant reason for the existence of many different sizes of grains in the nanosand-wiched films (Alharbi and Qasrawi, 2016). 0, the Raman spectra displayed three vibrational modes at 127.7,145.0 and 274.3 cm(-1). It was also observed that the indium insertion in the structure of the Ga2S3 shrinks the energy band gap by 0.18 eV. The nanosandwiched films are observed to exhibit a semiconductor metal (SM) transition at 310 K. The SM transition is associated with thermal hysteresis that exhibited a maximum value of 16% at 352 K. This behavior of the nanosandwiched films nominate it for use as thermally controlled electric switches. In addition, the impedance spectral analysis in the range of 10-1800 MHz has shown a capacitance tunability of more than 70%. The measurements of the wave trapping property displayed a bandpass/reject filter characteristics above 1.0 GHz which allow using the Ga2S3/In/Ga2S3 thin films as microwave resonator. (C) 2017 Elsevier GmbH. All rights reserved.
Citation - WoS: 3
Citation - Scopus: 3
Optical Analysis of Ge/Mgo and Ge/Bn Thin Layers Designed for Terahertz Applications
(Elsevier Sci Ltd, 2015) Al Garni, S. E.; Qasrawi, A. F.
In this work, a 200 nm Ge thin film is used as a substrate to design Ge/MgO and Ge/BN layers. The optical dynamics in these devices are investigated by means of the reflectivity and the transmissivity measurements. Particularly, the details of the dielectric spectra and the values of the energy band gaps (E-g) are investigated. Below 350 THz, the construction of Ge/MgO and Ge/BN interfaces decreased the effective dielectric constant of Ge by 39% and by 76%, respectively. It also increased the quality factor of the Ge optical device from 150 to 1400 and to 940 at 300 THz. All the dispersive optical parameters are also evaluated. In addition, the direct/indirect E-g value of Ge which was determined as 1.15/0.72 eV is observed to shift down by a 0.13/0.42 and by a 023/0.54 eV for the Ge/MgO and Ge/BN devices, respectively. The sharp increase in the dielectric constant with decreasing frequency in the range of 353 273 THz, the dispersive optical parameters and the energy band gap attenuations of the optical structures are promising as they indicate the applicability of the Ge, Ge/MgO and Gel BN layers in terahertz sensing. The latter technology has a wide range of applications like medical and telecommunication devices. (C) 2014 Elsevier Ltd. All rights reserved.
Citation - WoS: 2
Citation - Scopus: 2
Enhancement of Photoconductive Performance of Cdse Via Yb Nanosandwiching
(Elsevier Gmbh, Urban & Fischer verlag, 2018) Qasrawi, A. F.
In this work, we have explored the effects of the ytterbium nanosandwiching on the structural and optoelectronic properties of CdSe thin films. A ytterbium layer of thickness of 200 nm was sandwiched between two layers of CdSe (1.0 mu m). The structural investigations have shown that the hexagonal structure of CdSe is deformed by 1.9% and 0.8% along the a and c - axes, respectively, by the inclusion of the Yb in the structure of CdSe. In addition, a systematic redshifts in the interference patterns of the optical transmittance and reflectance were observed. Accordingly, the optical absorption coefficient spectra of CdSe which displayed two energy gap values of 1.62 and 1.36 eV, are also redshifted. On the other hand, when exposed to blue light irradiation, the steady state and time dependent photocurrent analysis revealed a remarkable enhancement presented by a three orders of magnitude increase in the responsivity of CdSe upon Yb sandwiching. The photocurrent was observed to be limited by the saturation of the surface states and traps that causes longer relaxation constant compared to that of pure CdSe. (C) 2017 Elsevier GmbH. All rights reserved.

Filters

Settings

Sort By

Results per page

Search Results