12 results
Search Results
Now showing 1 - 10 of 12
Article Citation - WoS: 9Citation - Scopus: 12On the Performance of Energy Criterion Method in Wi-Fi Transient Signal Detection(Mdpi, 2022) Mohamed, Ismail; Dalveren, Yaser; Catak, Ferhat Ozgur; Kara, AliIn the development of radiofrequency fingerprinting (RFF), one of the major challenges is to extract subtle and robust features from transmitted signals of wireless devices to be used in accurate identification of possible threats to the wireless network. To overcome this challenge, the use of the transient region of the transmitted signals could be one of the best options. For an efficient transient-based RFF, it is also necessary to accurately and precisely estimate the transient region of the signal. Here, the most important difficulty can be attributed to the detection of the transient starting point. Thus, several methods have been developed to detect transient start in the literature. Among them, the energy criterion method based on the instantaneous amplitude characteristics (EC-a) was shown to be superior in a recent study. The study reported the performance of the EC- a method for a set of Wi-Fi signals captured from a particular Wi-Fi device brand. However, since the transient pattern varies according to the type of wireless device, the device diversity needs to be increased to achieve more reliable results. Therefore, this study is aimed at assessing the efficiency of the EC-a method across a large set ofWi-Fi signals captured from variousWi-Fi devices for the first time. To this end, Wi-Fi signals are first captured from smartphones of five brands, for a wide range of signalto-noise ratio (SNR) values defined as low (3 to 5 dB), medium (5 to 15 dB), and high (15 to 30 dB). Then, the performance of the EC-a method and well-known methods was comparatively assessed, and the efficiency of the EC-a method was verified in terms of detection accuracy.Article Quality of Service Assessment: a Case Study on Performance Benchmarking of Cellular Network Operators in Turkey(2015) Kadıoğlu, Rana; Dalveren, Yaser; Kara, AliAbstract: This paper presents findings on performance benchmarking of cellular network operators in Turkey. Bench- marking is based on measurements of standard key performance indicators (KPIs) in one of the metropolitan cities of Turkey, Ankara. Performance benchmarking is formulated by incorporating customer perception by conducting surveys on how important KPIs are from the user s point of view. KPIs are measured, with standard test equipment, by drive test method on specified routes. According to the performance benchmarking results, the GSM and UMTS network operators achieving the best performance were determined in Ankara. Speech qualities of network operators, as the most popular service, were also evaluated by several statistical methods including pdf/cdf analysis and chi-square and Fisher s exact tests. The network operator providing the highest speech quality in Ankara was determined with the methods applied. Overall, the results and approaches on benchmarking of cellular networks in Turkey are reported for the first time in this paper. The approaches proposed in this paper could be adapted to wide-scale benchmarking of services in cellular networks.Article Citation - WoS: 5Citation - Scopus: 10Quality of Service Assessment: a Case Study on Performance Benchmarking of Cellular Network Operators in Turkey(Tubitak Scientific & Technological Research Council Turkey, 2015) Kadioglu, Rana; Dalveren, Yaser; Dalveren, Yaser; Kara, Ali; Kara, Ali; Dalveren, Yaser; Kara, Ali; Department of Electrical & Electronics Engineering; Department of Electrical & Electronics EngineeringThis paper presents findings on performance benchmarking of cellular network operators in Turkey. Benchmarking is based on measurements of standard key performance indicators (KPIs) in one of the metropolitan cities of Turkey, Ankara. Performance benchmarking is formulated by incorporating customer perception by conducting surveys on how important KPIs are from the user's point of view. KPIs are measured, with standard test equipment, by drive test method on specified routes. According to the performance benchmarking results, the GSM and UMTS network operators achieving the best performance were determined in Ankara. Speech qualities of network operators, as the most popular service, were also evaluated by several statistical methods including pdf/cdf analysis and chi-square and Fisher's exact tests. The network operator providing the highest speech quality in Ankara was determined with the methods applied. Overall, the results and approaches on benchmarking of cellular networks in Turkey are reported for the first time in this paper. The approaches proposed in this paper could be adapted to wide-scale benchmarking of services in cellular networks.Article Citation - WoS: 8Citation - Scopus: 15Distributed denial-of-service attack mitigation in network functions virtualization-based 5G networks using management and orchestration(Wiley, 2021) Koksal, Sarp; Dalveren, Yaser; Maiga, Bamoye; Kara, AliThe fifth generation (5G) technology is expected to allow connectivity to billions of devices, known as Internet of Things (IoT). However, IoT devices will inevitably be the main target of various cyberattack types. The most common one is known as distributed denial-of-service (DDoS) attack. In order to mitigate such attacks, network functions virtualization (NFV) has a great potential to provide the benefit of elasticity and low-cost solutions for protecting 5G networks. In this context, this study proposes a new mechanism developed to mitigate DDoS attacks in 5G NFV networks. The proposed mechanism utilizes intrusion prevention system's (IPS) virtual machines (VMs) to intercept the queries. Based on the volume of DDoS traffic, IPS's VMs are dynamically deployed by means of management and orchestration (MANO) in order to balance the load. To evaluate the effectiveness of the mechanism, experiments are conducted in a real 5G NFV environment built by using 5G NFV environment tools. To our best knowledge, this is the first time that NFV-based mechanism is experimentally tested in a real 5G NFV environment for mitigating DDoS attacks in 5G networks. The experimental results verify that the proposed mechanism can mitigate DDoS attacks effectively.Data Paper Citation - WoS: 42Citation - Scopus: 62A Database for the Radio Frequency Fingerprinting of Bluetooth Devices(Mdpi, 2020) Uzundurukan, Emre; Dalveren, Yaser; Kara, AliRadio frequency fingerprinting (RFF) is a promising physical layer protection technique which can be used to defend wireless networks from malicious attacks. It is based on the use of the distinctive features of the physical waveforms (signals) transmitted from wireless devices in order to classify authorized users. The most important requirement to develop an RFF method is the existence of a precise, robust, and extensive database of the emitted signals. In this context, this paper introduces a database consisting of Bluetooth (BT) signals collected at different sampling rates from 27 different smartphones (six manufacturers with several models for each). Firstly, the data acquisition system to create the database is described in detail. Then, the two well-known methods based on transient BT signals are experimentally tested by using the provided data to check their solidity. The results show that the created database may be useful for many researchers working on the development of the RFF of BT devices.Article Citation - WoS: 6Citation - Scopus: 9Design and Optimization of Piezoelectric-Powered Portable Uv-Led Water Disinfection System(Mdpi, 2021) Sala, Derda E.; Dalveren, Yaser; Kara, Ali; Derawi, MohammadDue to the environmental pollution threatening human life, clean water accessibility is one of the major global issues. In this context, in literature, there are many portable water disinfection systems utilizing ultraviolet (UV) radiation. UV water disinfection systems employ piezoelectric-based electric power along with UV light-emitting diode (LED) sources. This paper elaborates on the detailed design and parametric optimization of a portable UV disinfection system. The proposed system aims to generate piezoelectric harvesting-based electrical power simply by shaking, and the generated power is then used to supply UV-LEDs for water disinfection. To this end, overall system parameters along with a physical-mathematical model of mechanical, electrical and biochemical aspects of the system are fully developed. Moreover, the main design parameters of the developed model are derived for optimal operation of the system by employing Genetic Algorithm (GA). Finally, optimal design parameters were identified for three different cost scenarios. The model can further be improved for practical implementation and mass production of the system.Article Citation - WoS: 6Citation - Scopus: 6Indoor Propagation Analysis of Iqrf Technology for Smart Building Applications(Mdpi, 2022) Bouzidi, Mohammed; Gupta, Nishu; Dalveren, Yaser; Mohamed, Marshed; Alaya Cheikh, Faouzi; Derawi, MohammadOwing to its efficiency in the Internet of Things (IoT) applications in terms of low-power connectivity, IQRF (Intelligent Connectivity using Radio Frequency) technology appears to be one of the most reasonable IoT technologies in the commercial market. To realize emerging smart building applications using IQRF, it is necessary to study the propagation characteristics of IQRF technology in indoor environments. In this study, preliminary propagation measurements are conducted using IQRF transceivers that operate on the 868 MHz band in a peer-to-peer (P2P) configured system. The measurements are conducted both in a single corridor of a building in a Line-of-Sight (LoS) link and two perpendicular corridors in a Non-Line-of-Sight (NLoS) with one single knife-edge link. Moreover, the measured path loss values are compared with the predicted path loss values in order to comparatively assess the prediction accuracy of the well-known empirical models, such as log-distance, ITU, and WINNER II. According to the results, it is concluded that the ITU-1 path loss model agrees well with the measurements and could be used in the planning of an IQRF network deployment in a typical LoS corridor environment. For NLoS corridors, both ITU-3 and WINNERII-2 models could be used due to their higher prediction accuracy. We expect that the initial results achieved in this study could open new perspectives for future research on the development of smart building applications.Article Citation - WoS: 3Citation - Scopus: 6Investigating the Impact of Two Major Programming Environments on the Accuracy of Deep Learning-Based Glioma Detection From Mri Images(Mdpi, 2023) Yilmaz, Vadi Su; Akdag, Metehan; Dalveren, Yaser; Doruk, Resat Ozgur; Kara, Ali; Soylu, AhmetBrain tumors have been the subject of research for many years. Brain tumors are typically classified into two main groups: benign and malignant tumors. The most common tumor type among malignant brain tumors is known as glioma. In the diagnosis of glioma, different imaging technologies could be used. Among these techniques, MRI is the most preferred imaging technology due to its high-resolution image data. However, the detection of gliomas from a huge set of MRI data could be challenging for the practitioners. In order to solve this concern, many Deep Learning (DL) models based on Convolutional Neural Networks (CNNs) have been proposed to be used in detecting glioma. However, understanding which CNN architecture would work efficiently under various conditions including development environment or programming aspects as well as performance analysis has not been studied so far. In this research work, therefore, the purpose is to investigate the impact of two major programming environments (namely, MATLAB and Python) on the accuracy of CNN-based glioma detection from Magnetic Resonance Imaging (MRI) images. To this end, experiments on the Brain Tumor Segmentation (BraTS) dataset (2016 and 2017) consisting of multiparametric magnetic MRI images are performed by implementing two popular CNN architectures, the three-dimensional (3D) U-Net and the V-Net in the programming environments. From the results, it is concluded that the use of Python with Google Colaboratory (Colab) might be highly useful in the implementation of CNN-based models for glioma detection. Moreover, the 3D U-Net model is found to perform better, attaining a high accuracy on the dataset. The authors believe that the results achieved from this study would provide useful information to the research community in their appropriate implementation of DL approaches for brain tumor detection.Article Citation - WoS: 8Citation - Scopus: 9A Simple Propagation Model To Characterize the Effects of Multiple Human Bodies Blocking Indoor Short-Range Links at 28 Ghz(Mdpi, 2021) Dalveren, Yaser; Karatas, Gokhan; Derawi, Mohammad; Kara, AliThis study aims to provide a simple approach to characterize the effects of scattering by human bodies in the vicinity of a short-range indoor link at 28 GHz while the link is fully blocked by another body. In the study, a street canyon propagation characterized by a four-ray model is incorporated to consider the human bodies. For this model, the received signal is assumed to be composed of a direct component that is exposed to shadowing due to a human body blocking the link and a multipath component due to reflections from human bodies around the link. In order to predict the attenuation due to shadowing, the double knife-edge diffraction (DKED) model is employed. Moreover, to predict the attenuation due to multipath, the reflected fields from the human bodies around the link are used. The measurements are compared with the simulations in order to evaluate the prediction accuracy of the model. The acceptable results achieved in this study suggest that this simple model might work correctly for short-range indoor links at millimeter-wave (mmWave) frequencies.Article Citation - WoS: 5Citation - Scopus: 6Deployment and Implementation Aspects of Radio Frequency Fingerprinting in Cybersecurity of Smart Grids(Mdpi, 2023) Awan, Maaz Ali; Dalveren, Yaser; Catak, Ferhat Ozgur; Kara, AliSmart grids incorporate diverse power equipment used for energy optimization in intelligent cities. This equipment may use Internet of Things (IoT) devices and services in the future. To ensure stable operation of smart grids, cybersecurity of IoT is paramount. To this end, use of cryptographic security methods is prevalent in existing IoT. Non-cryptographic methods such as radio frequency fingerprinting (RFF) have been on the horizon for a few decades but are limited to academic research or military interest. RFF is a physical layer security feature that leverages hardware impairments in radios of IoT devices for classification and rogue device detection. The article discusses the potential of RFF in wireless communication of IoT devices to augment the cybersecurity of smart grids. The characteristics of a deep learning (DL)-aided RFF system are presented. Subsequently, a deployment framework of RFF for smart grids is presented with implementation and regulatory aspects. The article culminates with a discussion of existing challenges and potential research directions for maturation of RFF.
