4 results
Search Results
Now showing 1 - 4 of 4
Article Citation - WoS: 8Citation - Scopus: 8Nodular Cast Iron Ggg40, 60, 70 Mechanical Characterization From Bars and Blocks Obtained From Brazilian Foundry(Mdpi, 2022) Fernandes, Daniel de Oliveira; Mota Anflor, Carla Tatiana; Vaz Goulart, Jhon Nero; Baranoglu, BesimNodular cast iron has been commonly applied in industry and many engineering applications due to its low production cost and the similarity of its mechanical properties to carbon steel. The mechanical properties of nodular cast iron are very dependent on its microstructure and also on the characteristics of the graphite nodules. In this sense, the main objective of this paper was to evaluate and characterize the nodular cast iron grades GGG40, GGG60 and GGG70 in the absence of heat treatment. In addition, specimens were obtained from casted bars and blocks without the Y-block casting process. The microstructure was analyzed by optical microscopy with the support of computational image analysis for determination of the attributes of the graphite nodules and the quantification of each phase present in the microstructure of the nodular cast iron. The results showed that the microstructure has a strong effect on the material's strength, especially the density of graphite nodules in the material. This difference reinforces the idea that cast iron can undergo mechanical changes due to changes in the casting process, confirming the importance of checking the characteristics of the cast batch before engineering applications of the material.Article Citation - WoS: 5Citation - Scopus: 6Effect of welding wire and groove angle on mechanical properties of high strength steel welded joints(Wiley-v C H verlag Gmbh, 2017) Evci, C.; Isik, H.; Macar, M.Mechanical properties of high strength steel welded joints strictly depend on the welding process, the filler material composition and the welding geometry. This study investigates the effects of using cored and solid welding wires and implementing various groove angles on the mechanical performance of weld joints which were fabricated employing the gas metal arc welding process. It was found that weld joints of low alloy, high strength steels using low alloy steel cored welding wires exhibited higher tensile strength than that of low alloy steel solid wire and chromium-nickel steel bare welding wire when the method of gas metal arc welding is employed. The effect of groove angle on the strength and toughness of V-groove and double V-groove butt-joints was investigated. V-groove joints, with higher tensile strength than double V-groove joints in the whole range of groove angles, were superior in toughness for small groove angles, but impact toughness values of both joints were comparable for large angles. The effect of heat input and cooling rate on the weld microstructure and weld strength was also investigated by performing thermal analysis employing the commercial software ANSYS. It was concluded that cooling rate and solidification growth rate determined the microstructure of the weld zone which had great consequences in regard to mechanical properties.Article Citation - WoS: 3Citation - Scopus: 3Nondestructive Microstructural Characterization of Austempered Ductile Iron(Walter de Gruyter Gmbh, 2023) Tuzun, Mert Yagiz; Yalcin, Mustafa Alp; Davut, Kemal; Kilicli, VolkanAustempered ductile iron (ADI) has been preferred in a wide range of applications due its unique combination of high strength, good ductility, wear resistance and fracture toughness together with lower cost and lower density compared to steels. Magnetic Barkhausen noise (MBN) measurement offers a better alternative to traditional characterization techniques by being fast and non-destructive. A simple linear regression using only one single independent variable cannot correlate the MBN with the microstructure of ADI, since its microstructure is multi component. Multiple linear regression analysis (MLRA) was used to build a model that uses the characteristic features of microstructural constituents as input parameters to predict the MBN. For that purpose, Cu-Ni-Mo alloyed ductile iron samples austempered between 325 and 400 degrees C and for 45-180 min duration were used. The results show that MBN is most sensitive to the size and shape of acicular ferrite and retained austenite. Moreover, MBN is almost insensitive to the size, morphology and volume fraction of graphite particles. This indicates that retained austenite pins the domain walls more effectively than the graphite particles. Considering the results MLRA, MBN technique can be used to characterize the ausferritic microstructure of ADI.Review Citation - WoS: 9Citation - Scopus: 14Simulation of Quenching: a Review(Amer Soc Testing Materials, 2012) Gur, C. Hakan; Simsir, CanerQuenching is an important part of the production chain of steel components. The final properties of the product are largely determined during this stage, and this renders quenching as one of the most critical stages of production, requiring design and optimization specific to the product. The simulation of quenching requires the solution of a multi-scale/multi-physics problem with complex boundary conditions because of the simultaneously occurring heat transfer, phase transformation, and mechanical interactions. The aim of this paper is to provide an updated review of research studies on the simulation of quenching. The subject is covered from the pioneering work up to very recent advances in the field, with special emphasis on future research needs for improving the industrial usage of heat treatment simulations.
