18 results
Search Results
Now showing 1 - 10 of 18
Article Synthesis and Electropolymerization of a Selenophene Based Chemiluminescent Monomer and Its Use in Blood Detection(Elsevier Sci Ltd, 2025) Balci, Burcu; Cakal, Deniz; Cihaner, AtillaA new selenophene based trimeric chemiluminescent compound, namely 5,7-di(selenophen-2-yl)-2,3-dihydrothieno[3,4-d]pyridazine-1,4-dione (S2T-Lum), was synthesized in two steps via electron donor-acceptor-donor approach. Its chemiluminescent reaction with hydrogen peroxide was investigated in an alkaline solution in the presence of various catalysts such as different metal ions, hemin and blood samples and the results were compared with its thiophene analogue (T2T-Lum) and luminol. It was found that S2T-Lum was very sensitive to copper(II) and iron(III) ions, and blood samples. Also, it can be easily concluded that S2T-Lum as a new member of luminol type compounds is a potential candidate for the detection of blood findings in forensic science. Furthermore, S2T-Lum has an irreversible oxidation peak at 1.28 V vs Ag/AgCl, which is responsible from its electropolymerization. S2T-Lum was successfully polymerized electrochemically via potentiodynamic electrolysis without cleavage of its chemiluminescent active appendage. To the best of our knowledge, its corresponding polymer PS2T-Lum film is the first member of selenophene based luminol type electroactive polymers.Article Citation - WoS: 8Citation - Scopus: 8Improvement of Optical Properties and Redox Stability of Poly(3,4-Ethylenedioxythiophene)(Elsevier Sci Ltd, 2018) Ertan, Salih; Cihaner, AtillaIn order to improve the optical properties and redox stability of poly(3,4-ethylenedioxythiophene) (PEDOT) without changing its electrochemical and electrochromic behaviour, it was supported with alkyl-substituted polyhedral oligomeric silsesquioxane (POSS) cage. The corresponding copolymers were obtained electrochemically via potentiostatic or potentiodynamic methods and compared to the parent homopolymers. Electrochemical polymerization of EDOT and POSS containing EDOT called EDOT-POSS in various monomer feed ratios was performed in an electrolyte solution of 0.1 M TBAPF(6) dissolved in a mixture of dichloromethane and acetonitrile (1/3: v/v). Just as PEDOT, the copolymers represented the similar band gap (1.61 eV), redox and electrochromic behaviors. On the other hand, when compared to the parent PEDOT, the presence of POSS cages in the copolymer backbone improved the redox stability and optical properties of PEDOT such as higher percent transmittance change (65% at 621 nm), higher transparency at oxidized state, lower switching time (similar to 1.0 s) and higher coloration efficiency (463 cm(2)/C for 95% switching) as well as higher electrochemical stability (86% of its electroactivity retains after 1750 cycles under ambient conditions).Article Citation - WoS: 8Citation - Scopus: 8Electropolymerization and Ion Sensitivity of Chemiluminescent Thienyl Systems(Pergamon-elsevier Science Ltd, 2009) Asil, Demet; Cihaner, Atilla; Onal, Ahmet M.Redox driven chemiluminescent (CL) compounds based on thienyl and pyridazine systems, namely 2,3-dihydrothieno(3,4-d)pyridazine-1,4-dione (T-Lum) and 5,7-di-thiophen-2-yl-2,3-dihydrothieno[3,4-d]pyridazine-1,4-dione (TTT-Lum), were synthesized. Soluble compounds both in organic media and basic aqueous solution were found to give CL and electroluminescent (EL) reactions by the treatment of oxidants (H2O2 and KMnO4) and by an external potential pulse on the working electrode, respectively. Furthermore, the CL reaction can be speeded up by Fe3+ ion or blood samples. On the other hand, one of the compounds. TTT-Lum, can be polymerized successfully via electrochemically both in 0.1 M LiClO4/acetonitrile containing 5% of borontrifluoro diethylether (BF3-Et2O) and neat BF3-Et2O solution. The corresponding polymer film (PTTT-Lum) bearing CL units has a very stable and a well-defined reversible redox couple. Also, the electrochromic polymer film has a band gap of 1.74 eV and exhibits EL behavior. (C) 2009 Elsevier Ltd. All rights reserved.Article Citation - WoS: 44Citation - Scopus: 45A Novel Electrochromic and Fluorescent Polythienylpyrrole Bearing 1,1′-Bipyrrole(Pergamon-elsevier Science Ltd, 2009) Cihaner, Atilla; Mert, Olcay; Demir, Ayhan S.A novel conducting polymer was successfully synthesized via electropolymerization of 1-(1H-pyrrol-1-yl)-2,5-di(thiophen-2-yl)-1H-pyrrole. The electrochemical and electro-optical properties of the corresponding polymer, which was the first example of polymer containing 1,1'-bipyrrole units, were elaborated using electroanalytical and spectroscopic techniques. Cyclic voltammograms and electro-optical studies showed that the polymer has a stable and well-defined reversible redox process as well as electrochromic behavior. The processable polymer film also possessed a yellowish orange light emitter property. (C) 2008 Elsevier Ltd. All rights reserved.Article Citation - WoS: 94Citation - Scopus: 95A New Conducting Polymer Bearing 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (bodipy) Subunit: Synthesis and Characterization(Pergamon-elsevier Science Ltd, 2008) Cihaner, Atilla; Algi, FatihA new monomer system based on thiophene, pyrrole and 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene dye (SNS-BODIPY) was synthesized and its corresponding polymer (PSNS-BODIPY) was obtained via repetitive cycling or constant potential electrolysis in 0.1 M tetrabutylammonium hexafluorophosphate dissolved in dichloromethane. The PSNS-BODIPY film has very stable and well-defined reversible redox couples during p-doping process. Multi-electrochromic polymer film has a band gap of 2.9 eV with two absorption bands in its neutral state at 351 and 525 nm, attributed to the polymer backbone and BODIPY subunits, respectively. The percentage transmittance changes between both states (neutral and oxidized) were found as 12.1% for 351 nm and 17.7% for 525 nm in the visible region as well as 46.2% for 1050 nm in the near-infrared region. Beyond the robustness, the PSNS-BODIPY film has high redox stability (retaining 53.3% of its electroactivity at 351 nm after 2000 switching) with a low response time of 1.0 s. (C) 2008 Elsevier Ltd. All rights reserved.Article Citation - WoS: 11Citation - Scopus: 11Electrochemical and Optical Properties of Substituted Phthalimide Based Monomers and Electrochemical Polymerization of 3,4-Ethylenedioxythiophene Oligomeric Silsesquioxane (poss) Analogue(Elsevier Sci Ltd, 2019) Cakal, Deniz; Ertan, Salih; Cihaner, Atilla; Onal, Ahmet M.A new series of donor-acceptor-donor type trimeric monomers bearing substituted phthalimide units as acceptor units and thiophene and 3,4-ethylenedioxythiophene (EDOT) as donor units was synthesized and characterized. The strength of acceptor units and intramolecular charge transfer between donor and acceptor units were investigated by using electrochemical and optical methods. The main advantage of phthalimide unit over other acceptor units is the ease of its functionalizability. Thus, utilizing this property, a phthalimide derivative (E2P-POSS) bearing polyhedral oligomeric silsesquioxane (POSS) cage was introduced successfully with EDOT and polymerized electrochemically. The corresponding electroactive polymer, PE2P-POSS, has a band gap of 1.72 eV and is an electrochromic polymer: gray when neutralized and eggplant purple when oxidized.Article Citation - WoS: 30Citation - Scopus: 31Synthesis and Properties of 4,4-Difluoro (bodipy)-Based Conducting Copolymers(Elsevier, 2009) Cihaner, Atilla; Algi, FatihThe synthesis, characterization and engineering of a novel polymer based on a unique combination of 1,3,5,7-tetramethyl-8-(4-nitro-phenyl)-2,6-bis(2-thienyl)-4,4-difluoroboradiazaindacene and 3,4-ethylenedioxythiophene are highlighted. It was found that the polymer represents an environmentally robust electroactive material bearing high stability, well-defined quasi-reversible redox couple, and fast response time between redox states as well as high coloration efficiency. (c) 2008 Elsevier Ltd. All rights reserved.Article Citation - WoS: 45Citation - Scopus: 45An Ambipolar Low Band Gap Material Based on Bodipy and Edot(Elsevier Science Bv, 2009) Algi, Fatih; Cihaner, AtillaA novel donor-acceptor type conducting polymer based on BODIPY dye as acceptor and EDOT units as donor parts is synthesized electrochemically. The unique combination of BODIPY and EDOT units provides an ambipolar (n- and p-doping processes) low band gap material (4). This is the first example of p-n junction in an organic pi-conjugated material where BODIPY unit is incorporated directly in the main chain. Furthermore, the polymer film exhibits electrochromic behavior upon p-doping: a color change from light violet (neutral) to indigo (oxidized). (C) 2009 Elsevier B.V. All rights reserved.Article Citation - WoS: 43Citation - Scopus: 45Electrochemical and Optical Properties of New Soluble Dithienylpyrroles Based on Azo Dyes(Pergamon-elsevier Science Ltd, 2009) Cihaner, Atilla; Algi, FatihTwo dithienylpyrroles based on azo dyes, namely 2,5'-dimethyl-[4-(2,5-di-thiophen-2-yl-pyrrol-1-yl)-phenyl]azobenzene (SNS-AB2) and 2,5'- dimethyloxy-[4-(2,5-di-thiophen-2-yl-pyrrol-1-yl)phenyl]azobenzene (SNS-AB3), were synthesized and their corresponding polymers (PSNS-AB2 and PSNS-AB3) were successfully obtained via electropolymerization. The monomers have lower oxidation potentials (0.75 V and 0.80V vs. Ag/AgCl for SNS-AB2 and SNS-AB3, respectively) when compared to their analogous. Both monomers exhibited photoisomerism properties under irradiation at 360 nm. During the irradiation process, for example, the color of SNS-AB3 changes from yellow to greenish yellow. The electroactive polymer films have well defined and reversible redox couples with a good cycle stability in both aqueous and organic solutions. The polymer films also exhibited electrochromic behaviors; color changes from yellowish green to dark green for the PSNS-AB2 (lambda(max) = 435 nm and E-g = 2.31 eV) and from mustard color to green for PSNS-AB3 (lambda(max) = 430nm and E-g = 2.34 eV). Furthermore, the soluble polymers demonstrated different hues of yellow and green colors. (C) 2008 Elsevier Ltd. All rights reserved.Article Citation - WoS: 13Citation - Scopus: 13Effect of the Donor Units on the Properties of Fluorinated Acceptor Based Systems(Elsevier Sci Ltd, 2021) Cakal, Deniz; Akdag, Akin; Cihaner, Atilla; Onal, Ahmet M.A new series of monomers in the donor-acceptor-donor array, namely 5-fluoro-4,7-di(furan-2-yl)benzo[c][1,2,5] thiadiazole (F2BT-F), and 5-fluoro-4,7-di(selenophen-2-yl)benzo[c][1,2,5] thiadiazole (S2BT-F), bearing 5-fluorobenzo[c][1,2,5]-thiadiazole as the acceptor moiety and furan and selenophene as the electron donating groups was synthesized and polymerized electrochemically. To compare heteroatom effect, thiophene analogue of newly synthesized (FBT)-B-2-F and S2BT-F namely, (5-fluoro-4,7-di(thiophen-2-yl)benzo[c][1,2,5] thiadiazole (T2BT-F)) and its corresponding polymer were also synthesized. Effect of donor units on the electrochemical and optical properties of fluorinated acceptor based systems was investigated in terms of the effect of different sized heteroatoms in five-membered rings on the dihedral angle and planarity. Theoretical calculations also suggested a deviation from planarity upon fluorination. Moreover, electrochemically obtained polymers possess low bandgap values (1.62 eV-1.68 eV for PF2BT-F and PS2BT-F, respectively) and exhibited electrochromic properties with relatively low switching times.
