Filters

2021 - 20223
Reset filters

Settings

Language: enSubject: bimetallic catalyst

Search Results

Now showing 1 - 3 of 3
  • Thumbnail Image
    Article
    Mathematical Modeling of a Direct Dimethyl Ether Fuel Cell
    (Wiley-hindawi, 2022) Alpaydin, Guvenc Umur; Durmus, Gizem Nur Bulanik; Colpan, C. Ozgur; Devrim, Yilser
    In this study, a mathematical model of a direct dimethyl ether fuel cell (DDMEFC) is developed to examine the effect of operating conditions on voltage losses and cell performance. In modeling, the electrochemical relations and mass balances are used to find the cell voltage for the given conditions. The values of some modeling parameters are determined using experimental data through curve fitting. For validation purposes, in-house experimental studies are conducted. For this purpose, Pt50Ru25Pd25/C, Pt40Ru40Pd20/C, and Pt50Pd50/C anode catalysts are synthesized by the microwave method. The effects of these synthesized catalysts and the operating conditions (cell temperature, the molar ratio of dimethyl ether, and water) on the DDMEFC performance are discussed by comparing the activation and ohmic polarization as well as the polarization curves using the model developed. This cell-level modeling approach could be considered as a preliminary step in the design process of a DDMEFC stack.
  • Thumbnail Image
    Article
    Citation - WoS: 21
    Citation - Scopus: 21
    Investigation of Hydrogen Production From Sodium Borohydride by Carbon Nano Tube-Graphene Supported Pdru Bimetallic Catalyst for Pem Fuel Cell Application
    (Wiley, 2022) Al-Msrhad, Tuqa Majeed Hameed; Devrim, Yilser; Uzundurukan, Arife; Budak, Yagmur
    In this study, hydrogen (H-2) generation from the hydrolysis of sodium borohydride (NaBH4) catalyzed by bimetallic Palladium-Ruthenium (PdRu) supported on multiwalled carbon nanotube-graphene (MWCNT-GNP) hybrid material is investigated. The effect of various parameters such as temperature, NaBH4 concentration, and catalyst loading and effect of base concentration are examined to observed optimum operating conditions. Experimental results show that the PdRu/MWCNT-GNP bimetallic catalyst has high catalytic activity on NaBH4 hydrolysis reaction. It has been found that PdRu/MWCNT-GNP catalyst shows low activation energy of 22.33 kJ/mol for hydrolysis reaction of NaBH4. The PdRu/MWCNT-GNP catalyst also exhibits H-2 generation rate of 79.2 mmol/min center dot g(cat) at 45 degrees C. It shows good cycle stability in the catalyst reusability test and retained 89% of its initial catalytic activity after fifth use. The high catalytic activity of the PdRu/MWCNT-GNP catalyst makes it promising in H-2 generation from NaBH4 hydrolysis for commercial proton exchange membrane fuel cell (PEMFC) applications.
  • Thumbnail Image
    Article
    Citation - WoS: 19
    Citation - Scopus: 21
    Development of Effective Bimetallic Catalyst for High-Temperature Pem Fuel Cell To Improve Co Tolerance
    (Wiley, 2021) Al-Tememy, Mogdam Gassy Hussein; Devrim, Yilser
    In this study, it is aimed to examine the effect of multi-walled carbon nanotube doped graphene nanoplatelet (MWCNT-GNP) supported PtPd bimetallic catalyst on the performance of the high-temperature proton-exchange membrane fuel cell (HT-PEMFC). In addition, PtPd/GNP and PtPd/MWCNT bimetallic catalysts were also investigated for performance comparison. The characterizations of these catalysts were examined by ICP-MS, XRD, HR-TEM, and TGA analysis. The electrochemical characterizations of the catalysts were performed for both cyclic voltammetry (CV) and CO stripping experiments, as well as HT-PEMFC tests. The specific surface area (SSA) for PtPd/GNP and PtPd/MWCNT catalysts was obtained as 148 and 137 m(2)/g, respectively, while the highest SSA was achieved as 164 m(2)/g for PtPd/MWCNT-GNP. The performance of the catalysts was confirmed with the HT-PEMFC tests, based on the H-2/air and reformate gas/air experiments. The electrocatalytic results display that PdPt bimetallic catalysts exhibited higher catalytic property than that of commercial Pt/C catalyst. The highest performance was achieved with PtPd/MWCNT-GNP catalyst as 0.390 and 0.310 W/cm(2)at 160 degrees C for H-2/air and reformat/air, respectively. The obtained results indicate that the PtPd/MWCNT-GNP catalyst is appropriate for HT-PEMFC operations.