21 results
Search Results
Now showing 1 - 10 of 21
Article Citation - WoS: 22Citation - Scopus: 24Synthesis and Temperature-Tuned Band Gap Characteristics of Magnetron Sputtered Znte Thin Films(Elsevier, 2020) Isik, M.; Gullu, H. H.; Parlak, M.; Gasanly, N. M.Zinc telluride (ZnTe) is one of the attractive semiconducting compounds used in various optoelectronic devices. The usage of ZnTe in optoelectronic applications directs researchers to search its optical characteristics in great detail. For this purpose, structural and optical properties of magnetron sputtered ZnTe thin films were studied by means of x-ray diffraction and transmission spectroscopy measurements. Structural analyses indicated that ZnTe thin films having cubic crystalline structure were successfully grown on soda-lime glass substrates. Transmittance spectra in the 400-1000 nm were recorded in between 10 and 300 K temperature region. The analyses of absorption coefficient spectra resulted in band gap energies decreasing from around 2.31 (10 K) to 2.26 eV (300 K). Temperature dependency of gap energy was studied by Varshni and O'Donnell-Chen relations to determine various optical parameters like absolute zero temperature band gap energy, change of gap energy with temperature, phonon energy.Article Citation - WoS: 2Citation - Scopus: 3Electrical Characterization of Zninse2 Thin-Film Heterojunction(Springer, 2019) Gullu, H. H.; Parlak, M.ZnInSe2/Cu0.5Ag0.5InSe2 diode structures have been fabricated by thermal evaporation of stacked layers on indium tin oxide-coated glass substrates. Temperature-dependent dark current-voltage measurements were carried out to extract the diode parameters and to determine the dominant conduction mechanisms in the forward- and reverse-bias regions. The heterostructure showed three order of magnitude rectifying behavior with a barrier height of 0.72 eV and ideality factor of 2.16 at room temperature. In the high forward-bias region, the series and shunt resistances were calculated with the help of parasitic resistance relations, yielding room-temperature values of 9.54 x 10(2) Omega cm(2) and 1.23 x 10(3) Omega cm(2), respectively. According to the analysis of the current flow in the forward-bias region, abnormal thermionic emission due to the variation of the ideality factor with temperature and space-charge-limited current processes were determined to be the dominant conduction mechanisms in this heterostructure. In the reverse-bias region, the tunneling mechanism was found to be effective in the leakage current flow with trap density of 10(6) cm(-3). Spectral photocurrent measurements were carried out to investigate the spectral working range of the device structure. The main photocurrent peaks observed in the spectrum corresponded to the band-edge values of the active thin-film layers.Article Citation - WoS: 3Citation - Scopus: 3Fabrication of Cdsexte1-X Thin Films by Sequential Growth Using Double Sources(Elsevier, 2021) Demir, M.; Gullu, H. H.; Terlemezoglu, M.; Parlak, M.CdSexTe(1-x) (CST) ternary thin films were fabricated by stacking thermally evaporated CdSe and electron beam evaporated CdTe layers. The final structure was achieved in a stoichiometric form of approximately Cd:Se:Te = 50:25:25. The post-annealing processes at 300, 400, and 450 degrees C were applied to trigger the compound formation of CST thin films. The X-ray diffraction (XRD) profiles revealed that CdTe and CdSe have major peaks at 23.9 degrees and 25.5 degrees corresponds to (111) direction in cubic zinc-blend structure. Raman modes of CdTe were observed at 140 and 168 cm(-1), while Raman modes of CdSe films were detected at 208 and 417 cm(-1). The post-annealing process was found to be an effective method in order to combine both diffraction peaks and the vibrational modes of CdTe and CdSe, consequently to form CST ternary alloy. Transmission spectroscopy analysis revealed that CST films have direct band gap value of 1.6 eV.Article Citation - WoS: 1Citation - Scopus: 1Material Characterization of Thermally Evaporated Znsn2te4< Thin Films(Elsevier Gmbh, Urban & Fischer verlag, 2019) Gullu, H. H.Polycrystalline and stoichiometric ZnSn2Te4 (ZST) thin films were deposited on glass substrates by sequential evaporation of elemental powder sources. The deposited films were annealed in nitrogen atmosphere at annealing temperature ranging 100-300 degrees C. Under post-annealing treatments, the composition, structural, surface morphological, optical and electrical characteristics of the films were investigated. Annealing treatments lead to maintain the structural characteristics with the possible change in atomic concentration of the constituent elements in limit of detection and crystallinity of the films increased with increasing annealing temperature. Grainy surface morphology was observed in as-grown and annealed films and densely packed appearance of the surface of the samples indicates uniform deposition of the film over the entire substrate surface. Under the aim of visible light harvesting in the applications of thin film photovoltaics, normal-incidence transmittance measurements were performed and the direct band gap values were found in the range of 1.8-2.1 eV. Temperature dependent conductivity characteristics of the films were investigated under dark condition and the observed conductivity profiles were found in Arrhenius behavior with temperature dominated by the thermionic emission model.Article Citation - WoS: 4Citation - Scopus: 4Physical Characterization of Thermally Evaporated Sn-Sb Thin Films for Solar Cell Applications(Springer Heidelberg, 2023) Bektas, Tunc; Surucu, Ozge; Terlemezoglu, Makbule; Parlak, MehmetThe substitution of Sb in binary SnSe structure may lead to tailoring the physical properties of both SnSe and SbSe, promising absorber layers for thin film solar cells. The resulting Sn-Sb-Se structure could be an outstanding material for photovoltaic applications. In this study, Sn-Sb-Se thin films were deposited by thermal evaporation, and the effect of annealing on the films' structural, optical, and electrical properties were reported. XRD measurement shows that annealing at 300 degrees C yields the best crystalline quality, and structural parameters were calculated using XRD data. SEM and AFM measurements indicate deformation in the film surface after annealing at 400 degrees C. UV-Vis spectroscopy measurement provides a high absorption coefficient which indicates a direct band gap. The band gap and activation energies of the as-grown sample were found as 1.59 eV and 106.1 meV, respectively. The results of SEM, AFM, XRD, Raman, UV-Vis spectroscopy and temperature-dependent photoconductivity measurements were discussed throughout the paper.Article Citation - WoS: 1Deposition and Characterization of ZnSnSe2 Thin-Films Deposited by Using Sintered Stoichiometric Powder(Gazi Univ, 2019) Bayrakli Surucu, Ozge; Gullu, Hasan HuseyinIn this work, ZnSnSe2 (ZTSe) thin films were deposited using crystalline powder grown by vertical Bridgman-Stockbarger technique. The deposition process was carried out by means of e-beam evaporation on the well-cleaned soda lime glass substrates and keeping them at the substrate temperature of 200 degrees C. The structural, optical and electrical properties of ternary ZTSe thin films were investigated depending on the annealing temperature at 250 and 300 degrees C. X-ray diffraction analysis showed that as-grown films were in amorphous structure, however annealing at 250 degrees C triggered the crystallization on the preferred ternary structure and annealing at 300 degrees C resulted in the changes from amorphous to the polycrystalline structure. Using the compositional analysis, the detail information about the stoichiometry and the segregation mechanisms of the constituent elements in the structure were determined for both as-grown and annealed samples. In addition, they were morphologically characterized using scanning electron microscopy technique. The electrical properties were analyzed using temperature dependent dark- and photo-conductivity measurements. From the variation of electrical conductivity as a function of the ambient temperature, the current transport mechanisms and corresponding activation energies at specific temperature intervals for each sample were determined. The optical properties for the ZTSe thin films were studied depending on the structural changes with annealing.Article Citation - WoS: 11Citation - Scopus: 13Optical and Structural Characteristics of Electrodeposited Cd1-xznx< Nanostructured Thin Films(Elsevier, 2021) Erturk, K.; Isik, M.; Terlemezoglu, M.; Gasanly, N. M.The structural and optical characteristics of Cd1-xZnxS (CdZnS) thin films grown by the electrodeposition method were investigated in the present paper. The crystalline structure of the grown CdZnS thin film was determined as cubic wurtzite due to observed diffraction peaks associated with (111) and (220) planes. Atomic compositional ratios of the constituent elements were obtained using energy dispersive spectroscopy and doping concentration of the Zn was found as 5% (x similar to 0.05). Scanning electron microscopy image of the studied thin film indicated that grown film is nanostructured. Raman spectra of CdS and CdZnS thin films were measured and it was seen that observed longitudinal optical modes for CdZnS present a blue-shift. Temperature-dependent band gap energy characteristics of the thin films were studied performing transmission experiments in the 10-300 K temperature range. The analyses of the recorded transmittance spectra showed that direct band gap energy of the films decreases from 2.56 eV (10 K) to 2.51 eV (300 K) with the increase of temperature. The band gap energy vs. temperature dependency was studied applying well-known Varshni optical model and various optical parameters of the films were reported according to the results of the applied model.Article Citation - WoS: 2Citation - Scopus: 1Investigation of Conductivity Characteristics of Zn-In Thin Films(World Scientific Publ Co Pte Ltd, 2020) Gullu, H. H.; Parlak, M.Zn-In-Se thin films were fabricated on the ultrasonically cleaned glass substrates masked with clover-shaped geometry by thermal evaporation of its elemental sources. Temperature-dependent conductivity characteristics of the films were investigated under dark and illuminated conditions. The semiconductor type of the films was found as n-type by thermal probe test. According to the van der Pauw technique, the dark electrical conductivity analyses showed that the variations of conductivity of unannealed and annealed at 300 degrees C samples are in exponential dependence of temperature. These conductivity profiles were found to be dominated by the thermionic emission at high temperature region whereas their behaviors at low temperatures were modeled by hopping theory. On the contrary, as a result of the further annealing temperatures, the surface of the samples showed semi-metallic characteristics with deviating from expected Arrhenius behavior. In addition, the temperature-dependent photoconductivity of the films was analyzed under different illumination intensities and the results were explained by the supra-linear characteristic based on the two-center recombination model.Article Citation - WoS: 8Citation - Scopus: 7Structural and Optical Characteristics of Thermally Evaporated Tlgase2 Thin Films(Elsevier, 2022) Isik, M.; Işık, Mehmet; Karatay, A.; Gasanly, N. M.; Işık, Mehmet; Department of Electrical & Electronics Engineering; Department of Electrical & Electronics EngineeringThe present paper reports the structural and optical properties of thermally evaporated TlGaSe2 thin films. X-ray diffraction pattern of evaporated film presented two diffraction peaks around 24.15 and 36.00 degrees which are associated with planes of monoclinic unit cell. Surface morphology of the TlGaSe2 thin films was investigated by scanning electron and atomic force microscopy techniques. Although there was observed some ignorable amount of clusters of quasi-spherical shape in the scanning electron microscope image, the film surface was observed almost uniform. Raman spectrum exhibited six peaks around 253, 356, 488, 800, 1053 and 1440 cm(-1) associated with possible vibrational mode combinations. Band gap energy of the thin film was determined as 3.01 eV from the analyses of transmission spectrum. Transmission spectrum presented strong Urbach tail and analyses of corresponding region resulted in Urbach energy of 0.66 eV. The structural and optical properties of deposited TlGaSe2 thin films were compared with those of single crystal. This comparison would provide valuable information about influence of thickness on the studied compounds.Article Citation - WoS: 5Citation - Scopus: 5Structural and Optical Properties of Thermally Evaporated (gase)0.75-(gas)0.25 Thin Films(Elsevier Gmbh, 2021) Isik, M.; Işık, Mehmet; Emir, C.; Gasanly, N. M.; Işık, Mehmet; Department of Electrical & Electronics Engineering; Department of Electrical & Electronics EngineeringGaSe and GaS binary semiconducting compounds are layered structured and have been an attractive research interest in two-dimensional material research area. The present paper aims at growing (GaSe)0.75 - (GaS)0.25 (or simply GaSe0.75S0.25) thin film and investigating its structural and optical properties. Thin films were prepared by thermal evaporation technique using evaporation source of its single crystal grown by Bridgman method. The structural properties were revealed using x-ray diffraction (XRD), energy dispersive spectroscopy (EDS), scanning electron microscopy (SEM) and atomic force microscopy (AFM) techniques. XRD pattern and EDS analyses indicated that thin films annealed at 300 ?C were successfully deposited and its structural characteristics are well-consistent with its single crystal form. Surface morphology was studied by means of SEM and AFM measurements. Optical properties were investigated by transmission and Raman spectroscopy techniques. Raman spectrum exhibited three peaks around 172, 242 and 342 cm-1. Analyses of transmission spectrum revealed the direct band gap energy as 2.34 eV. The mixed compounds of GaSe0.75S0.25 were prepared for the first time in a thin film form and the results of the present paper would provide valuable information to research area in which layered compounds have been studied in detail.
- «
- 1 (current)
- 2
- 3
- »