281 results
Search Results
Now showing 1 - 10 of 281
Article Citation - WoS: 6Citation - Scopus: 6Which Is Better To Predict Erectile Dysfunction and Male Sexual Function in the Context of Metabolic Syndrome: Triglyceride-Glucose Index or Visceral Adiposity Index?: a Retrospective Cross-Sectional Study(Springer, 2024) Bolat, Mustafa Suat; Bolat, Ipek Akalin; Dundar, Cihad; Asci, RamazanPurposeMany factors influence male sexual function, including metabolic disorders such as metabolic syndrome (MetS). We aimed to investigate the effects of two metabolic indices, the triglyceride-glucose (TyG) index and the visceral adiposity index (VAI), on male sexual function.MethodsA total of 400 men having sexual dysfunction were included. Anthropological data, comorbidities were recorded. Serum total testosterone, prolactin, and estradiol levels were recorded. Sex-specific VAI was calculated using the [(WC/39.68) + (1.88xMI)] x (TG/1.03) x (1.31/HDL) formula and using Ln (fasting triglycerides) x (fasting glucose)/2] formula, TyG index was calculated. Turkish-validated 15-item long-form of the International Index of Erectile Dysfunction (IIEF) questionnaire and male sexual health questionnaire (MSHQ) were used for erectile function and ejaculatory function, respectively. The ROC analysis was used to evaluate the predictive abilities of TyG and VAI cut-off values for ED risk.ResultsA higher TyG index and VAI were associated with an increased risk of ED. The presence of MetS further worsened sexual function, with lower scores in sexual satisfaction, orgasm, desire, and general satisfaction. The TyG index and VAI showed similar predictive abilities for ED. Patients with MetS had worse ejaculation quality compared to those without MetS.ConclusionsThese findings highlight the potential of the TyG index and VAI as convenient tools for predicting and assessing sexual dysfunction in men, particularly in the context of metabolic disorders. Early detection and intervention for metabolic syndrome and insulin resistance may help to mitigate their negative impact on male sexual function.Article Citation - WoS: 33Citation - Scopus: 37Discrete Sizing Optimization of Steel Trusses Under Multiple Displacement Constraints and Load Cases Using Guided Stochastic Search Technique(Springer, 2015) Azad, S. Kazemzadeh; Hasancebi, O.The guided stochastic search (GSS) is a computationally efficient design optimization technique, which is originally developed for discrete sizing optimization problems of steel trusses with a single displacement constraint under a single load case. The present study aims to investigate the GSS in a more general class of truss sizing optimization problems subject to multiple displacement constraints and load cases. To this end, enhancements of the GSS are proposed in the form of two alternative approaches that enable the technique to deal with multiple displacement/load cases. The first approach implements a methodology in which the most critical displacement direction is considered only when guiding the search process. The second approach, however, takes into account the cumulative effect of all the critical displacement directions in the course of optimization. Advantage of the integrated force method of structural analysis is also utilized for further reduction of the computational effort in these approaches. The proposed enhancements of GSS are investigated and compared with some selected techniques of design optimization through six truss structures that are sized for minimum weight. The numerical results reveal that both enhancements generally provide promising solutions with an insignificant computational effort.Article Evaluating Anterior Segment Stability and Corneal Endothelium After Prolene Gonioscopy Assisted Transluminal Trabeculotomy (gatt) in Open-Angle Glaucoma(Springer, 2024) Aribas, Yavuz Kemal; Aktas, Zeynep; Ertop, MestanIntroduction This study investigates the short-term effects of prolene gonioscopy-assisted transluminal trabeculotomy (GATT) on anterior segment parameters and corneal endothelium in patients with open-angle glaucoma. Methods This retrospective study included 30 eyes from 30 patients who underwent GATT surgery. Demographic data, ophthalmological examination findings, and intraocular pressure (IOP) measurements using a Goldman applanation tonometer were recorded. Scheimpflug images were acquired at the pre-operative stage, as well as on the 1st day, 1st week, and 1st month postoperatively. Corneal endothelial cell counts were obtained via specular microscopy. Results The mean age of patients was 60.3 +/- 15.5 years. Anterior chamber depth and central corneal thickness increased on the 1st postoperative day (p:0.002, p < 0.001, respectively). Changes in anterior chamber depth values at the postoperative 1st week and 1st month compared to baseline were not statistically significant. Central corneal thickness decreased significantly at the 1st postoperative month compared to baseline (p:0.007). Corneal endothelial cell counts at the 1st month were comparable to baseline values (p:0.936). Conclusion Our findings reveal that prolene gonioscopy-assisted transluminal trabeculotomy induces temporary changes in anterior segment parameters but preserves corneal endothelial cell count within the first month, suggesting a promising profile for GATT in glaucoma management.Article Citation - WoS: 2Citation - Scopus: 2Structural Design Optimization of Multi-Layer Spherical Pressure Vessels: a Metaheuristic Approach(Springer, 2019) Akis, Tolga; Azad, Saeid KazemzadehThis study addresses the optimum design problem of multi-layer spherical pressure vessels based on von Mises yield criterion. In order to compute the structural responses under internal pressure, analytical solutions for one-, two-, and three-layer spherical pressure vessels are provided. A population-based metaheuristic algorithm is reformulated for optimum material selection as well as thickness optimization of multi-layer spherical pressure vessels. Furthermore, in order to enhance the computational efficiency of the optimization algorithm, upper bound strategy is also integrated with the algorithm for reducing the total number of structural response evaluations during the optimization iterations. The performance of the algorithm is investigated through weight and cost minimization of one-, two- and three-layer spherical pressure vessels and the results are presented in detail. The obtained numerical results, based on different internal pressures as well as vessel sizes, indicate the usefulness and efficiency of the employed methodology in optimum design of multi-layer spherical pressure vessels.Article Citation - WoS: 14Citation - Scopus: 14Fuzzy Logic Model To Estimate Seasonal Pseudo Steady State Chlorophyll-A Concentrations in Reservoirs(Springer, 2004) Soyupak, S; Chen, DGA fuzzy logic model is developed to estimate pseudo steady state chlorophyll-a concentrations in a very large and deep dam reservoir, namely Keban Dam Reservoir, which is also highly spatial and temporal variable. The estimation power of the developed fuzzy logic model was tested by comparing its performance with that from the classical multiple regression model. The data include chlorophyll-a concentrations in Keban lake as a response variable, as well as several water quality variables such as PO4 phosphorus, NO3 nitrogen, alkalinity, suspended solids concentration, pH, water temperature, electrical conductivity, dissolved oxygen concentration and Secchi depth as independent environmental variables. Because of the complex nature of the studied water body, as well as non-significant functional relationships among the water quality variables to the chlorophyll-a concentration, an initial analysis is conducted to select the most important variables that can be used in estimating the chlorophyll-a concentrations within the studied water body. Following the outcomes from this initial analysis, the fuzzy logic model is developed to estimate the chlorophyll-a concentrations and the advantages of this new model is demonstrated in model fitting over the traditional multiple regression method.Article Citation - WoS: 6Citation - Scopus: 7The Effect of Social Media Usage, Appearance-Related Social Media Pressure and Body Mass Index on Body Appreciation of Cosmetic Procedure Patients(Springer, 2023) Sonmez, Mehmet; Esiyok, ElifBackground The number of cosmetic procedures has increased in recent years. Social media use and its effects on plastic surgery decisions are among the most widely discussed topics. This study aimed to test a research model that explores the relationship between social media usage frequency, appearance-related social media pressure, and body mass index (BMI) on the body appreciation of patients undergoing cosmetic procedures, and to evaluate their clinical impacts. Methods In total, 136 participants were included in this study, which met and exceeded the sample size requirement. The questionnaire was designed by using reliable scales and demographic data. Partial least squares structural equation modeling was used to test the hypothesized research model. Results The mean age of the participants was 35 years, and 70% had normal BMI scores. Among them, 59.6% underwent invasive procedures and 40.4% underwent minimally invasive procedures. BMI negatively affected body appreciation (beta = 0.199, p < 0.05). Social media did not have a significant effect on appearance-related social media pressure (beta = 0.001, p > 0.05). Appearance-related social media pressure negatively affected body appreciation (beta = - 0.280. p > 0.05). Conclusion Social media is not only an information source but also creates pressure on appearance. Therefore, plastic surgeons should use social media and consider the psychology of patients during their communication.Article Citation - Scopus: 1Surface Patterning of Poly(ε-Caprolactone) Scaffolds by Electrospinning for Monitoring Cell Biomass Behavior(Springer, 2022) Albayrak, Deniz; Sasmazel, Hilal TurkogluThe aim of this work was to produce three-dimensional fibrous surface patterns of poly(epsilon-caprolactone) (PCL), onto two-dimensional smooth solvent cast PCL surfaces with an electrospinning method by using a mask/stencil for monitoring cell biomass behavior. The characterizations of produced scaffolds were done by thickness measurements, scanning electron microscopy (SEM) analyses, contact angle (CA) measurements, Fourier-transform infrared spectroscopy (FTIR), and mechanical tests. According to SEM micrographs, all of the electrospun scaffold surfaces exhibited bead-free and uniform morphology while solvent cast surfaces were smooth and nonporous. CA measurements revealed that the solvent cast surfaces had moderate hydrophilicity (similar to 60 degrees) while electrospun regions had a more hydrophobic character (similar to 110 degrees for fully electrospun surfaces and similar to 85 degrees for electrospun patterns). Mechanical testing showed the produced scaffolds had a brittle character. Moreover, cell culture studies were performed with mouse fibroblast (L929) cells for 7 days period, and cell attachment assay, MTT assay, fluorescence, and SEM analyses were done. Cell culture studies indicated that the solvent cast and electrospun patterns have different characteristics for cell behavior. Thus, cell movement, attachment, and proliferation can be directed and monitored by obtaining different surface topographies in a single substrate surface. Based on the results of this study, it was found that patterns consisting of polymeric nanofiber structures can also be created directly by the electrospinning method.Article Citation - WoS: 22Citation - Scopus: 22Optical Properties of Tlins2 Layered Single Crystals Near the Absorption Edge(Springer, 2006) Qasrawi, A. F.; Gasanly, N. M.The sample thickness effect on the optical properties of TlInS2 layered crystals has been investigated at room temperature. The absorption coefficient of the samples calculated from the experimental transmittance and reflectance in the photon energy range of 1.10-3.10 eV has two absorption regions. The first is a long-wavelength region of 1.16-1.28 eV. The second region lies above 2.21 eV with a thickness-dependent indirect band gap. The energy gap decreases from 2.333 to 2.255 eV as the sample thickness increases from 27 to 66 mu m. The differential spectra of absorption coefficient demonstrates the existence of a thickness-dependent impurity level being lowered from 2.360 to 2.307 eV as sample thickness increases from 27 to 66 mu m. (c) 2006 Springer Science + Business Media, Inc.Article Citation - WoS: 7Citation - Scopus: 7Physical Design and Dynamical Analysis of Resonant-Antiresonant Ag/MgO/GaSe/Al Optoelectronic Microwave Devices(Springer, 2015) Kmail, Renal R. N.; Qasrawi, A. F.In this work, the design and optical and electrical properties of MgO/GaSe heterojunction devices are reported and discussed. The device was designed using 0.4-mu m-thick n-type GaSe as substrate for a 1.6-mu m-thick p-type MgO optoelectronic window. The device was characterized by means of ultraviolet-visible optical spectrophotometry in the wavelength region from 200 nm to 1100 nm, current-voltage (I-V) characteristics, impedance spectroscopy in the range from 1.0 MHz to 1.8 GHz, and microwave amplitude spectroscopy in the frequency range from 1.0 MHz to 3.0 GHz. Optical analysis of the MgO/GaSe heterojunction revealed enhanced absorbing ability of the GaSe below 2.90 eV with an energy bandgap shift from 2.10 eV for the GaSe substrate to 1.90 eV for the heterojunction design. On the other hand, analysis of I-V characteristics revealed a tunneling-type device conducting current by electric field-assisted tunneling of charged particles through a barrier with height of 0.81 eV and depletion region width of 670 nm and 116 nm when forward and reverse biased, respectively. Very interesting features of the device are observed when subjected to alternating current (ac) signal analysis. In particular, the device exhibited resonance-antiresonance behavior and negative capacitance characteristics near 1.0 GHz. The device quality factor was similar to 10(2). In addition, when a small ac signal of Bluetooth amplitude (0.0 dBm) was imposed between the device terminals, the power spectra of the device displayed tunable band-stop filter characteristics with maximum notch frequency of 1.6 GHz. The energy bandgap discontinuity, the resonance-antiresonance behavior, the negative capacitance features, and the tunability of the electromagnetic power spectra at microwave frequencies nominate the Ag/MgO/GaSe/Al device as a promising optoelectronic device for use in multipurpose operations at microwave frequencies.Article Citation - WoS: 12Citation - Scopus: 11Determination of the Possible Quantum Numbers for the Newly Observed Ξb< State(Springer, 2021) Azizi, K.; Sarac, Y.; Sundu, H.The LHCb Collaboration recently reported the observation of a new excited bottom baryon Xi(b)(6227)(0) and announced an improvement in the measurements related to the previously observed Xi(b)(6227)(-) state. We conduct an analysis for Xi(b)(6227)(0) state considering it as isospin partner of the Xi(b)(6227)(-) resonance and possibly 1P or 2S excited state with spin J = 3/2. The corresponding masses for both possibilities have consistent results with the experimental data, indicating that only with the mass sum rules, one can not make exact decision on the nature and quantum numbers of this state. To go further, the decays of these possible excited states to Xi(-)(b)pi(+) final state are also considered and the relevant strong coupling constants are extracted from the light cone sum rules. The obtained decay width values support the possibility of Xi(b)(6227)(0) to be the 1P excited state of Xi(b)(5945)(0) baryon.
