32 results
Search Results
Now showing 1 - 10 of 32
Article Citation - WoS: 11Citation - Scopus: 11Experimental and Modeling Studies of a High-Temperature Electrochemical Hydrogen Compressor(Pergamon-elsevier Science Ltd, 2024) Durmus, Gizem Nur Bulanik; Kuzu, Cemil; Devrim, Yilser; Colpan, C. Ozgur; Bulanık Durmuş, Gizem NurSome non-technical factors such as economics and logistics prevent hydrogen (H2) tech-nologies from becoming more widespread in daily life. Today, the prevalence of H2 tech-nologies requires new technological developments. Electrochemical hydrogen compressors (ECHC) are of great interest due to their ability to pressurize and purify in one step. In this study, the electrochemical H2 compression performance of high phosphoric acid (PA) doped poly 2,2-m-phenylene-5,5-benzimidazole (PBI) membrane-based HT-ECHC under high temperature and non-humid conditions was investigated through both an experimental and a numerical approach. The H2 compression capacity of HT-ECHC at different operating voltages was examined by performance tests at 160 degrees C, and it was determined that the electrochemical compression performance increased with increasing operating voltage. It was observed that the current density values also increased with increasing voltage, and it was determined that a current density of 61.2 A was obtained at 1 V. As a result of the tests, H2 was successfully compressed from atmospheric pressure to 60 bar by HT-ECHC without any gas leakage. The results of the developed model were compared with the experimental performance test data, and the variation of molar flow, cell voltage, and cell efficiency over time was examined. It has been determined that the back diffusion from the cathode to the anode in the cell increases with the increasing operating voltage of HT-ECHC and therefore the cell efficiency decreases. It has been evaluated that the developed model and experimental results are in good agreement. (c) 2023 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.Article Citation - WoS: 26Citation - Scopus: 27Identifying the Potentials for Charge Transport Layers Free N-P Homojunction-Based Perovskite Solar Cells(Pergamon-elsevier Science Ltd, 2022) Khan, Danish; Sajid, Sajid; Khan, Suliman; Park, Jongee; Ullah, IhsanPerovskite solar cells (PSCs) with no charge transport layers (CTLs) could be one of the major device architectures for the production of simple and low-cost devices. However, CTLs-free PSCs based on n-p homojunction have yet to show high power conversion efficiency (PCE), which is most likely due to inadequate light-and charge-management in the p-type perovskite. The device operation is examined using Solar Cell Capacitance Simulator (SCAPS)-software, and a novel n-p homojunction design is proposed to attempt efficient CTLs-free PSCs. Several aspects of p-type layer that can affect device performance, such as acceptor density, photon harvesting capability, defects density, and resistances to the transport of charge-carriers are scrutinized and adjusted. Furthermore, the effects of different work-functions of metal electrodes are examined. A suitable acceptor concentration is required for oriented charge transport. It is determined that a p-type perovskite with a thickness of 0.3 mu m is advantageous for high performance. A metal electrode with a high work-function is essential for efficient device. Consequently, a PCE of 15.60% is obtained with an optimal defect density of E15 cm(-3), indicating that n-p homojunction-based CTLs-free PSCs are promising since they simplify the device design and fabrication process while retaining an acceptable PCE.Article Citation - WoS: 78Citation - Scopus: 80Composite Membrane by Incorporating Sulfonated Graphene Oxide in Polybenzimidazole for High Temperature Proton Exchange Membrane Fuel Cells(Pergamon-elsevier Science Ltd, 2022) Devrim, Yilser; Durmus, Gizem Nur Bulanik; Bulanık Durmuş, Gizem NurThe objective of this work is to examine the polybenzimidazole (PBI)/sulfonated graphene oxide (sGO) membranes as alternative materials for high-temperature proton exchange membrane fuel cell (HT-PEMFC). PBI/sGO composite membranes were characterized by TGA, FTIR, SEM analysis, acid doping&acid leaching tests, mechanical analysis, and proton conductivity measurements. The proton conductivity of composite membranes was considerably enhanced by the existence of sGO filler. The enhancement of these properties is related to the increased content of -SO3H groups in the PBI/sGO composite membrane, increasing the channel availability required for the proton transport. The PBI/sGO membranes were tested in a single HT-PEMFC to evaluate high-temperature fuel cell performance. Amongst the PBI/sGO composite membranes, the membrane containing 5 wt. % GO (PBI/sGO-2) showed the highest HT-PEMFC performance. The maximum power density of 364 mW/cm(2) was yielded by PBI/sGO-2 membrane when operating the cell at 160 degrees C under non humidified conditions. In comparison, a maximum power density of 235 mW/cm(2) was determined by the PBI membrane under the same operating conditions. To investigate the HT-PEMFC stability, long-term stability tests were performed in comparison with the PBI membrane. After a long-term performance test for 200 h, the HT-PEMFC performance loss was obtained as 9% and 13% for PBI/sGO-2 and PBI membranes, respectively. The improved HT-PEMFC performance of PBI/sGO composite membranes suggests that PBI/sGO composites are feasible candidates for HT-PEMFC applications. (C) 2022 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.Article Citation - WoS: 21Citation - Scopus: 21Optimal Design and Technoeconomic Analysis of On-Site Hydrogen Refueling Station Powered by Wind and Solar Photovoltaic Hybrid Energy Systems(Pergamon-elsevier Science Ltd, 2025) Ozturk, Reyhan Atabay; Devrim, YilserIn this study, a grid-connected on-site hydrogen filling station (HRS) integrated with renewable energy systems is designed and examined for different daily hydrogen refueling capacities. The installation location of the HRS is selected in Izmir (Turkey) and daily solar radiation and wind speed data are used in the calculations. The HRS station was integrated with a hybrid energy system using photovoltaic panels (PV), wind turbine (WT) and PV/ WT and five different daily refueling scenarios were investigated. A techno-economic analysis is conducted for the designed HRS system, considering the initial investment capital, installation and operating costs. The levelized cost of hydrogen (LCOH) is evaluated according to different refueling capacity scenarios, periods of operation and renewable energy installation capacities. The lowest LCOH is obtained as 4.5 /kg H2 in the PVintegrated HRS system for a 20-year investment scenario. The results prove the suitability of the HRS system for integrating renewable energy in the identified region. It is recommended to integrate analytical models for the system components to increase the reliability of the design and optimization process in future planned studies.Article Citation - WoS: 6Citation - Scopus: 7Fabrication and Performance Evaluation of Graphene-Supported Ptru Electrocatalyst for High-Temperature Electrochemical Hydrogen Purification(Pergamon-elsevier Science Ltd, 2023) Bal, Ilay Bilge; Durmus, Gizem Nur Bulanik; Devrim, Yilser; Bulanık Durmuş, Gizem NurThe main aim of this study is to investigate the high-temperature electrochemical hydrogen purification (HT-ECHP) performances of graphene nanoplatelet (GNP) support material decorated with platinum (Pt) and platinum-ruthenium (PtRu) nanoparticles prepared by microwave irradiation technique. Prepared catalysts coupled to the phosphoric acid doped polybenzimidazole (PBI) membrane for HT-ECHP application. The structural and electrochemical properties of the catalysts were examined by thermogravimetric analysis (TGA), X-Ray Diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Transition electron microscopy (TEM) and cyclic voltammetry (CV) analyses. The characterization results indicate that the catalysts provided the necessary properties for HT-ECHP application. The HT-ECHP performances are investigated with reformate gas mixture containing hydrogen (H2), carbon dioxide (CO2) and carbon monoxide (CO) in the range of 140-180 & DEG;C. The results show that the electrochemical purification performances of the catalysts increase with increasing operating temperature. The highest H2 purification performance is obtained with PtRu/GNP catalyst. The high electrochemical H2 purification performance of the PtRu/GNP catalyst can be attributed to the strong synergistic interactions between Pt and Ru particles decorated on the GNP. These results advocate that the PtRu/GNP catalyst is a hopeful catalyst for HT-ECHP application. & COPY; 2023 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.Article Citation - WoS: 2Citation - Scopus: 3Effect of Phthalimide and Thieno[3,4-C]pyrrole Acceptors on P-Conjugated Donor-Acceptor Monomers: Experimental and Theoretical Investigations of Photophysical and Electrochemical Properties(Pergamon-elsevier Science Ltd, 2023) Cakal, Deniz; Arabaci, Elif Demir; Yildirim, Erol; Cihaner, Atilla; Onal, Ahmet M.; Demir Arabacı, ElifIn this study, two novel donor-acceptor-donor monomers were synthesized by coupling a phthalimide (PI) acceptor unit with thiophene (T) and ethylenedioxythiophene (EDOT (E)) donor units. These two novel PI-based monomers, namely 2-(2-ethylhexyl)-4,7-di(thiophen-2-yl)isoindoline-1,3-dione (T-PI) and 4,7-bis(2,3-dihydrothieno[3,4-b] [1,4]dioxin-5-yl)-2-(2-ethylhexyl)isoindoline-1,3-dione (E-PI), were fully characterized via UV-vis and fluorescence spectroscopy as well as electrochemical methods, and the results were directly compared with those of previously synthesized thieno[3,4-c]pyrrole-4,6-dione (TPD)-based analogues to report the results for four classes of monomers. In this regard, the ef-fects of different donor groups and structural modifications in the acceptor unit as changed from PI to TPD have been investigated to reveal the precise effect of the donor and acceptor on the optical and electrochemical properties of the monomers. All monomers exhibits an intramolecular charge transfer band in the low energy region due to strong donor and acceptor interactions. The oxidation and reduction potentials of the monomers are found to vary depending on the strengths of both donor and acceptor units. PI-based monomers show more positive oxidation and less negative reduction potentials than TPD-based analogues. Similarly, thiophene-based analogues reveal the same trend in their oxidation and reduction potentials as compared to EDOT-based analogues. Lastly, PI-based monomers could not undergo polymerization via electrochemical method, unlike TPD-based monomers, since the dihedral angle arising between donor and PI acceptor disturbs molecular planarity significantly, as demonstrated by first principle calculations.(C) 2023 Elsevier Ltd. All rights reserved.Article Citation - WoS: 13Citation - Scopus: 16A Novel Data Encryption Method Using an Interlaced Chaotic Transform(Pergamon-elsevier Science Ltd, 2024) Gokcay, Erhan; Tora, HakanWe present a novel data encryption approach that utilizes a cascaded chaotic map application. The chaotic map used in both permutation and diffusion is Arnold's Cat Map (ACM), where the transformation is periodic and the encrypted data can be recovered. The original format of ACM is a two-dimensional mapping, and therefore it is suitable to randomize the pixel locations in an image. Since the values of pixels stay intact during the transformation, the process cannot encrypt an image, and known-text attacks can be used to get back the transformation matrix. The proposed approach uses ACM to shuffle the positions and values of two-dimensional data in an interlaced and nested process. This combination extends the period of the transformation, which is significantly longer than the period of the initial transformation. Furthermore, the nested process's possible combinations vastly expand the key space. At the same time, the interlaced pixel and value transformation makes the encryption highly resistant to any known-text attacks. The encrypted data passes all random-data tests proposed by the National Institute of Standards and Technology. Any type of data, including ASCII text, can be encrypted so long as it can be rearranged into a two-dimensional format.Article Citation - WoS: 24Citation - Scopus: 30High-Efficiency Application of Cts-Co Nps Mimicking Peroxidase Enzyme on Tmb(ox)(Pergamon-elsevier Science Ltd, 2022) Altuner, Elif Esra; Ozalp, Veli Cengiz; Yilmaz, M. Deniz; Bekmezci, Muhammed; Sen, FatihIn this study, analytical studies of Chitosan-Cobalt(II) (CTS-Co(II)) nanoparticles (CTS - Co NPs) by mimicking horseradish peroxidase (HRP) were evaluated. In the applications, it was observed that CTS-Co NPs 3,3 ' 5,5 ' tetramethylbenzidine (TMB) oxidized in the presence of hydrogen peroxide (H2O2). The required CTS-Co NPs were synthesized at 50 degrees C in 30 min and characterized using Fourier transform infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA), inductively coupled plasma-optical emission spectroscopy (ICP-OES), and Xray photon spectroscopy (XPS) was done. CTS-Co NPs were studied to develop a selective TMB biosensor on TMB (ox) substrate. The synthesized CTS-Co NPs formed a catalytic reaction with 30% 0.2 mM H2O2 on 0.2 M TMB substrate. After the catalytic reaction, sensitive signals were obtained from the desired biosensor. Electrochemical measurements were taken as low limit of 10 mg and a high limit of 20 mg for the determination of CTSCo NPs to TMB(ox). In the microplate study; The sensors were applied on 1.5 mu g and 3 mu g CTS-Co NPs TMB(ox) substrate, respectively. CTS- Co NPs; for TMB(ox) determination, optical density (OD) measurement was taken as a low limit of 1.5 mu g and a high limit of 3 mu g. Electrochemical applications of particles and microplate reader results were compared with horseradish peroxidase (HRP) enzyme for sensor properties. According to the data obtained, it was observed that it behaved similarly to the CTS-Co NPs peroxidase enzyme. This work presents innovations for nanoparticle extraction and sensor study from chitosan and other naturally sourced polymers.Article Citation - WoS: 10Citation - Scopus: 11Is There Convergence in Renewable Energy Deployment? Evidence From a New Panel Unit Root Test With Smooth and Sharp Structural Breaks(Pergamon-elsevier Science Ltd, 2023) Corakci, Aysegul; Omay, TolgaThis study examines whether the contribution of renewable energy to the total primary energy supply converges in a panel of 24 OECD countries over the period 1960-2020. To this end, a new panel unit root test that allows for both sharp and smooth breaks is proposed to test for the stochastic convergence hypothesis. Although renewable energy convergence is not rejected when the newly proposed test is applied to the full panel of OECD countries, it found only moderate support within the members of the panel using a sequential panel selection methodology. In fact, in two high-income OECD countries, the contribution of renewable energy to the primary energy supply shows no sign of convergence: Poland and Iceland. Therefore, the renewable energy shares seem to be converging to a common steady state in only a group of OECD countries over the long run. This uneven pattern of convergence, in turn, suggests that the OECD countries are still far away from developing a common sustainable renewable energy target, calling for urgent international policy cooperation to encourage the divergent econo-mies to seek out the menu of policies that ensure the worldwide success of renewable energy transformation.Article Citation - WoS: 12Citation - Scopus: 14Some Fixed Point Results on Interpolative Metric Spaces(Pergamon-elsevier Science Ltd, 2025) Karapinar, Erdal; Agarwal, Ravi P.This paper aims to introduce some basic fixed point theorems on interpolative metric space that is a natural extension of standard metric space.
