23 results
Search Results
Now showing 1 - 10 of 23
Article Citation - WoS: 9Citation - Scopus: 8Reinforcing Effect of Polyurethane Sizing on Properties of Acrylonitrile-Butadiene Composites Involving Short Carbon Fiber(Springer international Publishing Ag, 2020) Ahmed, Shan Abdulalaziz; Tirkes, Seha; Tayfun, UmitIn this study, we present the influence of sizing layer of short carbon fiber (CF) to the basic properties of CF reinforced acrylonitrile-butadiene-styrene (ABS) composites. Composite samples are prepared with four different loading ratio of 5, 10, 15 and 20% by weight using melt-compounding. Surface topography, elemental analysis and surface functionality of CF samples are confirmed by atomic force microscopy (AFM), energy-dispersive X-ray (EDX) and infrared (FTIR) spectroscopy techniques, respectively. Characterizations of composites are performed based on mechanical, thermo-mechanical, melt-flow (MFI) and morphological performances of composites. According to test results, mechanical properties of ABS are enhanced with CF additions. Polyurethane (PU) sized CF containing composites display higher tensile strength, modulus and hardness compared to desized ones. CF additions lead to increase in glass transition temperature of ABS copolymer. MFI values of composites are found to be in narrow range, hence CF additions cause no effect for processing conditions of ABS. According to SEM analysis, CF surfaces are covered by polymer matrix thanks to PU sizing layer of CF, whereas debondings are formed for desized CF-filled ABS matrix. Results indicate that PU-sizing is suitable for ABS/CF composite system. [GRAPHICS] .Article Citation - WoS: 25Citation - Scopus: 27A New Processable and Fluorescent Polydithienylpyrrole Electrochrome With Pyrene Appendages(Pergamon-elsevier Science Ltd, 2013) Tirkes, Seha; Mersini, Jetmire; Oztas, Zahide; Algi, Melek Pamuk; Algi, Fatih; Cihaner, AtillaA new hybrid compound, namely 1-(pyren-3-yl)-2,5-di(thiophen-2-yl)-1H-pyrrole (SNS-P), was polymerized via both chemical and electrochemical methods. Chemically obtained soluble polydithienylpyrrole (c-PSNS-P) bearing pyrene appendages is a homogeneous and uniform polymer with a number averaged molecular weight of 15,200 g/mol. The polymer exhibits both multi-electrochromic and fluorescent properties. Upon oxidation, the color of electrochemically obtained polymer (e-PSNS-P) changes from yellowish orange to greenish yellow and to green/blue and finally to blue. In addition, the polymer induces yellowish orange (564 nm) and bright orange emission (613 nm) in solution and solid states, respectively. (C) 2012 Elsevier Ltd. All rights reserved.Article Citation - WoS: 14Citation - Scopus: 16Electrosynthesis of Polyfuran in Acetonitrile-Boron Trifluoride-Ethyl Ether Mixture and Its Device Application(John Wiley & Sons inc, 2007) Tirkes, Seha; Onal, Ahmet M.Electrochemical polymerization of furan was achieved in acetonitrile/boron trifluoride/ethyl ether (CH3 CN/BF3/EE) mixture in the presence of tetrabutylammonium tetrafluoroborate via constant potential electrolysis at 1.4 V versus Ag/AgCl. Electrochemical behavior of furan was investigated in the same solvent mixture of varying ratios, utilizing cyclic voltammetry. Free-standing polyfuran (PFu) films were obtained in CH3CN/BF3/EE mixture (2/4/4; v/v/v) and characterized using FTIR spectroscopic technique. Spectroelectrochemical behavior of the PFu film was investigated by recording the electronic absorption spectra, in sitn, in monomer-free solution. It is observed that PFu film can be reversibly cycled between -0.1 V (gray) and + 0.6 V versus Ag-wire (gray color); however, this behavior diminishes in the presence of water. Electrochromic device application of PFu film with poly(ethylene dioxythiophene) was also studied. (c) 2006 Wiley Periodicals, Inc.Article Citation - WoS: 64Citation - Scopus: 74Production and Characterization of Poly (lactic Acid)-Based Biocomposites Filled With Basalt Fiber and Flax Fiber Hybrid(Sage Publications Ltd, 2020) Eselini, Najah; Tirkes, Seha; Akar, Alinda Oyku; Tayfun, UmitPoly (lactic acid) (PLA)-based biocomposites containing flax fiber (FF) and basalt fiber (BF) both separately and together were prepared by melt blending method at the total constant ratio of 30 wt%. Mechanical properties, thermo-mechanical characteristics, thermal stability, flow behaviors, water uptake, and morphology of composites were investigated by tensile, hardness and impact tests, dynamic mechanical analysis (DMA), thermal gravimetric analysis, melt flow index (MFI) test, water absorption, and scanning electron microscopy, respectively. Mechanical test results show that tensile strength, elongation, elastic modulus, and impact strength are extended up to higher values with increase in BF content in hybrid composites. Conversely, the presence of FF displays a negative effect in which these values drop down drastically as the FF concentration increases. On the other hand, slightly higher hardness values are obtained by the addition of FF at higher loadings. DMA analysis reveals that BF inclusion leads glass transition temperature of PLA to one point higher, but hybrid and FF containing composites shift that temperature to lower values. Storage moduli of composites are enhanced with the increase in BF concentration and remarkable decreases are observed for FF-filled composites. Hybrid composites exhibit average MFI values between PLA/FF and PLA/BF composites.Article Citation - WoS: 14Citation - Scopus: 12Electrochemical Synthesis of New Conjugated Polymers Based on Carbazole and Furan Units(Elsevier Science Sa, 2015) Oguzturk, H. Esra; Tirkes, Seha; Onal, Ahmet M.In this study, synthesis of four new monomers; 3,6-di(2-furyl)-9H-carbazole (M1), 3,6-di(2-furyl)-9-ethyl-carbazole (M2), 2,7-di(2-furyl)-9-H-carbazole (M3), 2,7-di(2-furyl)-9-(tridecan-7-yl)-9H-carbazole (M4), was achieved via Stifle cross-coupling reaction. The monomers were electrochemically polymerized, via repetitive cycling in acetonitrile-tetrabutylammonium hexafluorophosphate electrolytic medium. Optical and electrochemical properties of the monomers and their corresponding polymers were investigated and it was found that optical properties show slight variations depending on the connectivity between the carbazole and furan moieties. However, all the monomers synthesized in this work exhibited an irreversible oxidation peak at around 1.0 V. Electrochemically obtained polymer films, on the other hand, exhibited quasi-reversible redox behavior due to doping/dedoping of the polymers which was accompanied by a reversible electrochromic behavior. Their band gap values (E-g) were elucidated utilizing spectroelectrochemical data and it was found that polymers obtained from 2,7-substituted carbazole derivatives have slightly lower band gap values. Furthermore, scanning electron micrographs were used for morphological examinations. (C) 2015 Elsevier B.V. All rights reserved.Article Citation - WoS: 1Citation - Scopus: 1Electrochemical Polymerization and Characterization of Polyether-Substituted Aniline Derivatives(Wiley, 2007) Tirkes, Seha; Cihaner, Atilla; Oenal, Ahmet M.New compounds consisting of aniline units linked by polyether bridges have been synthesized and their electrochemical polymerization was performed via constant potential electrolysis and cyclic voltammetry in an aqueous solution containing 3.0 moI L-1 H2SO4. Chemical polymerization was carried out using (NH4)(2)S2O8 as oxidizing agent. It was found that both methods gave the same polymer product without any cleavage of the polyether bridge between aniline rings. The polymers were characterized using the Fourier transform infrared spectroscopic technique and the thermal behavior of electrochemically prepared polymers was investigated using thermogravimetric analysis. Spectroelectrochemical properties of the films were investigated using the in situ UV-visible spectroscopic technique. (c) 2007 Society of Chemical Industry.Conference Object Citation - WoS: 33Citation - Scopus: 35Enhancement of Mechanical, Thermal and Water Uptake Performance of Tpu/Jute Fiber Green Composites Via Chemical Treatments on Fiber Surface(Walter de Gruyter Gmbh, 2020) Salem, Tuffaha Fathe; Tirkes, Seha; Akar, Alinda Oyku; Tayfun, UmitChopped jute fiber (JF) surfaces were modified using alkaline, silane and eco-grade epoxy resin. Surface characteristics of jute fibers were confirmed by FTIR and EDX analyses. JF filled polyurethane elastomer (TPU) composites were prepared via extrusion process. The effect of surface modifications of JF on mechanical, thermo-mechanical, melt-flow, water uptake and morphological properties of TPU-based eco-composites were investigated by tensile and hardness tests, dynamic mechanical analysis (DMA), melt flow index (MFI) test, water absorption measurements and scanning electron microscopy (SEM) techniques, respectively. Mechanical test results showed that silane and epoxy treated JF additions led to increase in tensile strength, modulus and hardness of TPU. Glass transition temperature (T-g) of TPU rose up to higher values after JF inclusions regardless of treatment type. Si-JF filled TPU exhibited the lowest water absorption among composites. Surface treated JFs displayed homogeneous dispersion into TPU and their surface were covered by TPU according to SEM micro-photographs.Article Citation - WoS: 8Citation - Scopus: 9Contribution of Surface Silanization Process on Mechanical Characteristics of Tpu-Based Composites Involving Feldspar and Quartz Minerals(Wiley, 2023) Bouzmane, Hajar; Tirkes, Suha; Yilmaz, Volkan Murat; Tayfun, Umit; Tirkes, SehaIn this study, quartz and feldspar powders were surface treated using a silane coupling agent to achieve a more compatible mineral surface with the polymer matrix. Details of surface characteristics of minerals were examined by energy-dissipative X-ray spectroscopy, contact angle measurements, and infrared spectroscopy. Thermoplastic polyurethane-TPU was compounded with minerals using the melt-blending technique. Mechanical, thermo-mechanical, melt-flow, and morphological characterizations of TPU and relevant composites were performed by utilizing tensile and Shore hardness tests, dynamic mechanical analysis (DMA), melt flow index (MFI) measurements, and scanning electron microscopy (SEM), respectively. Water repellency of TPU and composites were also evaluated experimentally. Effects of surface treatments were discussed by comparing the results of composites filled with pristine and modified minerals. Results revealed that enrichment of quartz and feldspar surfaces confer mechanical and thermo-mechanical performance of composites. Mineral inclusions caused no drastic changes to the MFI parameter of TPU. The silane layer on the mineral surface displayed a barrier effect to water uptake of composites. Homogeneous dispersion and improved interfacial adhesion of mineral particles to the TPU phase were confirmed with help of SEM observations. Quartz exhibited slightly higher performance thanks to its silica-rich composition. The findings of this research exhibited the considerable influence of the silane layer on the mineral surface on the mechanical performance of TPU-based composites.Article Citation - WoS: 30Citation - Scopus: 31A New Low-Voltage Polymeric Electrochromic(Elsevier Sci Ltd, 2010) Pamuk, Melek; Tirkes, Seha; Cihaner, Atilla; Algi, FatihDesign, synthesis, and properties of a novel donor-acceptor-donor type low-voltage-driven green polymeric electrochrome, P1, which is based on 8-(2,3-dihydrothieno[3,4-b][1,4]dioxin-5-yl)-11-(2,3-dihydrothieno[3,4-b][l,4]dioxin-7-yl)acenaphtho[1,2-b]quinoxaline (1) are highlighted. It is noted that P1 has an ambipolar (n- and p-doping processes) character in 0.1 M tetrabutylammonium hexafluorophosphate/dichloromethame solution and switches to a transmissive blue state upon oxidation. Furthermore, this new polymeric electrochromic candidate exhibits high redox stability, high coloration efficiency and/or contrast ratio, high percent transmittance (%T) and low response time (1.0 s) with a band gap of 1.10 eV-1.25 eV. (C) 2009 Elsevier Ltd. All rights reserved.Article Citation - WoS: 6Citation - Scopus: 6Electrochemical Copolymerization and Characterization of Dianilines Linked by Polyether Bridge With Aniline(Springer, 2010) Tirkes, Seha; Onal, Ahmet M.Copolymer of aniline and triethylene glycol bis(o-aminophenyl) ether was synthesized by constant potential electrolysis. Cyclic voltammogram of the copolymer films recorded in the monomer-free electrolytic solution revealed that the redox behavior of the films approaches to that of poly(triethylene glycol bis(o-aminophenyl) ether) with increasing amount of triethylene glycol bis(o-aminophenyl) in the feed ratio. Copolymerization was investigated by in situ recording the changes in the electronic absorption spectrum during electrolysis. The free standing copolymer film was characterized utilizing Fourier transform infrared spectrometer, and spectroelectrochemical behavior of the copolymer was investigated via in situ UV-vis spectroscopic technique. Besides the electron spin resonance study of the copolymer film, the different morphologies of the polymers were examined by scanning electron microscopy and the copolymerization was confirmed. The temperature dependence conductivity of the copolymer film was measured by four-probe technique in the temperature range of 100-300 K, and the calculated parameters showed that conduction mechanism fits to variable range hopping.
- «
- 1 (current)
- 2
- 3
- »