16 results
Search Results
Now showing 1 - 10 of 16
Article Citation - WoS: 23Citation - Scopus: 24Anisotropic mechanical properties of Tl4Ag18Te11 compound with low thermal conductivity(Academic Press inc Elsevier Science, 2020) Gencer, Aysenur; Surucu, Ozge; Surucu, Gokhan; Deligoz, EnginThe anisotropic mechanical properties of Tl4Ag18Te11 compound was investigated elaborately for the first time by using Density Functional Theory calculations with the Vienna Ab-initio Simulation Package in this work. Tl4Ag18Te11 compound was optimized in the I4mm space group and the formation energy was determined as a negative value that is the indication of the experimental synthesizability of this compound. The optimized crystal structure was employed for the calculations of the elastic constants and the obtained values revealed the mechanical stability of Tl4Ag18Te11 compound. The polycrystalline properties were determined such as shear modulus, Poisson's ratio, etc. In addition, the anisotropic elastic properties were presented. The direction dependent sound waves velocities, polarization of the sound waves, enhancement factor and the power flow angle were determined. The thermal conductivity studies were performed and the minimum thermal conductivity (0.259 W m(-1)K(-1)) and the diffusion thermal conductivity (0.202 W m(-1)K(-1)) were calculated. This study illustrates the capability of this compound for the thermoelectric materials.Article Citation - WoS: 8Citation - Scopus: 9First-principles studies of Tin+1SiNn (n=1, 2, 3) MAX phase(Taylor & Francis Ltd, 2020) Surucu, Gokhan; Gullu, Hasan Huseyin; Candan, Abdullah; Yildiz, Bugra; Erkisi, AytacIn this study, the structural, electronic, mechanical, lattice dynamical and thermodynamic characteristics of ( 1, 2 and 3) phase compounds were investigated using the first principle calculations. These ternary nitride compounds were found to be stable and synthesisable, and the results on the stability nature of them were also evaluated for the possible and phases. -was found to be the most stable one among these new class of layered phases for which limited works are available in the literature. The band structures, that are essential for the electronic properties, were determined along with the partial density of states (PDOS) indicating the metallic behaviour of these compounds. The polycrystalline elastic moduli were calculated based on the single-crystal elastic constants and the mechanical stabilities were verified. Some basic physical parameters, such as bulk modulus, shear modulus, Young's modulus, Poisson's ratio, Debye temperature, and sound velocities, were also predicted. Furthermore, the anisotropic elastic properties were visualised in three dimensions (3D) for Young's modulus, linear compressibility, shear modulus and Poisson's ratio as well as with the calculation of the anisotropic factors. - phase showed the most isotropic characteristics with minimum deviations. These theoretical values were also used to identify the stiffness and ionic characteristics. The phonon dispersion curves and corresponding PDOS indicated that compounds were dynamically stable. Moreover, thermodynamic properties obtained from phonon dispersion curves were investigated in detail.Article Citation - WoS: 8Citation - Scopus: 9Experimental and Theoretical Investigation of the Mechanical Characteristics of Sillenite Compound: Bi12geo20<(Elsevier Science Sa, 2021) Surucu, Gokhan; Isik, Mehmet; Gencer, Aysenur; Gasanly, NizamiThe present study reports the mechanical and elastic characteristics of Bi12GeO20 (BGO) compound by experimental nanoindentation measurements and density functional theory (DFT) calculations. X-ray diffraction pattern of BGO was plotted and revealed diffraction peaks were associated with Miller indices of cubic crystalline structure with lattice constant of a = 10.304 angstrom. Two- and three-dimensional representations of Young's modulus, linear compressibility, shear modulus and Poisson's ratio were presented according to DFT calculations. The calculated elastic constants pointed out the mechanically stable and anisotropic behavior of the BGO. The hardness and Young's modulus ranges of the BGO calculated from DFT studies were found as 3.7-6.3 GPa and 61.7-98.9 GPa, respectively. Hardness and Young's modulus of BGO single crystal were also obtained by analyzing force-dependent nanoindentation experimental data. It was observed that hardness and Young's modulus decrease with increase of load in the low applied loads and then reaches saturation in the high applied loads. This behavior is known as indentation size effect. True hardness value was determined from proportional specimen resistance model as 4.1 GPa. The force independent region presented the Young's modulus as 114 GPa. (C) 2021 Elsevier B.V. All rights reserved.Article Citation - WoS: 23Citation - Scopus: 24First Principles Study on the Structural, Electronic, Mechanical and Lattice Dynamical Properties of Xrhsb (x = Ti and Zr) Paramagnet Half-Heusler Antimonides(Iop Publishing Ltd, 2019) Surucu, Gokhan; Candan, Abdullah; Erkisi, Aytac; Gencer, Aysenur; Gullu, Hasan HuseyinThe half-Heusler TiRhSb and ZrRhSb alloys in the formation of face-centered cubic MgAgAs-type structure, which conforms to the F (4) over bar 3m space group with 216 as the space number, have been investigated using Generalized Gradient Approximation (GGA) implemented in Density Functional Theory (DFT). The calculated formation enthalpies and the plotted energy-volume curves of different types of structural phases (alpha, beta, and gamma) in these alloys indicate that the gamma-phase structure is the best energetically suitable structure. In addition, TiRhSb and ZrRhSb alloys have been found as paramagnetic (PM) with the investigation of antiferromagnetic (AFM), ferromagnetic (FM), and paramagnetic (PM) orders in the most stable gamma-phase structure. Therefore, their electronic, mechanical, and dynamical properties have been examined in the gamma structural phase and paramagnetic order. These alloys have semiconducting nature due to the observed same band gaps in both the majority and minority spin channels of the calculated spin-polarised electronic band structure. These calculated band gaps are 0.75 eV for gamma-TiRhSb and 1.18 eV for gamma-ZrRhSb. The predicted elastic constants indicate that the alloys in this study are mechanically stable and show nearly isotropic behavior in the gamma structural phase. Also, the minimum and the diffuson thermal conductivites have been determined for these alloys. Finally, the calculated phonon dispersion spectras for the gamma-TiRhSb and gamma-ZrRhSb half-Heusler antimonide alloys show the dynamic stability of these systems.Article Citation - WoS: 8Citation - Scopus: 8Complex Nodal Structure Phonons Formed by Open and Closed Nodal Lines in Coass and Na2cup Solids(Royal Soc Chemistry, 2022) Ding, Guangqian; Sun, Tingting; Surucu, Gokhan; Surucu, Ozge; Gencer, Aysenur; Wang, XiaotianTopological phononic states with nodal lines not only have updated our knowledge of the phases of matter in a fundamental way, but also have become a major frontier research direction in condensed matter physics. From a mathematical perspective, nodal line phonons can be divided into open and closed types. The present attempt is a report on the coexistence of such open and closed nodal line phonons in two realistic solids, CoAsS and Na2CuP, based on first-principles calculations. Furthermore, it is shown that the closed and the open nodal line states in CoAsS and Na2CuP have touching points and can form a complex nodal structure phonon in a momentum space. Due to the topologically non-trivial behavior of the complex nodal structure in both phonons, evident phononic surface states occur in the projected surfaces of both materials. In this way, these states, arising from the projected crossing points, can benefit experimental detection in follow-up studies. It has been stated that the open and closed nodal line states are formed by the crossings of two phonon branches and, hence, these two types of nodal line phonons are coupled with each other. The results obtained here could be considered as a breakthrough in clearly demonstrating the coexistence of the open and closed nodal line states in phonons and, for this reason, may inspire researchers seeking materials with such topological states in other bosons, such as photons.Article Citation - WoS: 28Citation - Scopus: 29The investigation of electronic, anisotropic elastic and lattice dynamical properties of MAB phase nanolaminated ternary borides: M 2 AlB 2 ( M = Mn , Fe and Co ) under spin effects(Elsevier Science Sa, 2020) Surucu, Gokhan; Yildiz, Bugra; Erkisi, Aytac; Wang, Xiaotian; Surucu, Ozge[No Abstract Available]Article Citation - WoS: 1Citation - Scopus: 1Penta-Graphene/SnS2 Heterostructures with Z-Scheme Charge Transfer for Efficient Photocatalytic Water Splitting(Amer Chemical Soc, 2025) Nasoz, Duygu Lale; Surucu, Ozge; Wang, Xiaotian; Surucu, Gokhan; Sarac, Yasemin; Gencer, AysenurThe present study explores the photocatalytic potential of penta-graphene (PG) and SnS2 monolayers, along with their heterostructures (PG/SnS2), using Density Functional Theory (DFT). Structural analysis confirms that the PG/SnS2 heterostructure exhibits enhanced stability, efficient charge separation, and suitable band alignment. Optimized lattice parameters (3.66 & Aring; for PG and 3.88 & Aring; for SnS2) closely matched literature values, while ab initio molecular dynamics (AIMD) confirmed thermodynamic stability at 300 K. The heterostructure's band gap of 2.75 eV (HSE method) supports visible light absorption, and the band edge positions enable hydrogen and oxygen evolution reactions across pH 0 to 6. Optical analysis reveals significant visible-light absorption with an optical band gap of 1.43 eV. Additionally, this study identifies a Z-scheme charge transfer mechanism in the PG/SnS2 heterostructure, facilitated by an internal built-in electric field that drives directional charge migration, effectively enhancing electron-hole separation and suppressing recombination losses. This Z-scheme mechanism optimizes redox reactions, making PG/SnS2 a highly efficient photocatalyst for solar-driven hydrogen production. Furthermore, the effect of water solvent is investigated, and it reveals that this heterostructure is stable under water solvent, having suitable band edges for the photocatalytic water splitting. These findings highlight the PG/SnS2 heterostructure as a promising candidate for sustainable hydrogen generation, offering a new perspective for the design of next-generation 2D photocatalytic materials.Article Citation - WoS: 4Citation - Scopus: 3Exploring the Thermal Stability of Sb2se3 for Potential Applications Through Advanced Thermal Analysis Methods(Amer Chemical Soc, 2025) Altuntas, Gozde; Isik, Mehmet; Surucu, Gokhan; Parlak, Mehmet; Surucu, OzgeAntimony selenide (Sb2Se3) is a promising material for energy applications, including photovoltaics, thermoelectrics, and photodetectors, due to its favorable electronic properties, availability, and low toxicity. However, its thermal stability, crucial for device efficiency and reliability, has been less explored, leaving a gap in understanding its high-temperature suitability. This study evaluates the thermal stability of Sb2Se3 using thermogravimetric analysis (TGA), differential thermal analysis (DTA), and differential scanning calorimetry (DSC). The results show that Sb2Se3 remains stable up to 500 degrees C, with two significant weight loss stages: 1.75% between 500 and 610 degrees C, and 3.50% between 610 and 775 degrees C, indicating decomposition processes. Activation energies for the decomposition phases were determined as 121.8 and 57.2 kJ/mol using the Coats-Redfern method. Additionally, an endothermic phase transition was observed between 599 and 630.6 degrees C via DSC analysis. These findings demonstrate Sb2Se3's potential for high-temperature energy applications, providing essential insights for optimizing its use in solar cells, thermoelectric devices, and other technologies.Article Citation - WoS: 45Citation - Scopus: 43Investigation of Structural, Electronic, Magnetic and Lattice Dynamical Properties for Xcobi (x: Ti, Zr, Hf) Half-Heusler Compounds(Elsevier, 2020) Surucu, Gokhan; Isik, Mehmet; Candan, Abdullah; Wang, Xiaotian; Gullu, Hasan HuseyinStructural, electronic, magnetic, mechanical and lattice dynamical properties of XCoBi (X: Ti, Zr, Hf) Half-Heusler compounds have been investigated according to density functional theory and generalized gradient approximation. Among alpha, beta and gamma structural phases, gamma-phase structure has been found as the most stability characteristics depending on the calculated formation enthalpies, energy-volume dependencies and Cauchy pressures. Energy-volume plots of possible magnetic orders of gamma-phase XCoBi compounds have been analyzed and the most stable order has been found as paramagnetic nature. The theoretical studies on gamma-phase structures resulted in band gap energies of 0.96, 0.99 and 0.98 eV for TiCoBi, ZrCoBi and HfCoBi semiconducting compounds, respectively. Born-Huang criteria applied on elastic constants of interest compounds has indicated that gamma-phase is also mechanically stable for all studied compounds. In addition, various mechanical, lattice dynamical and thermodynamical parameters of XCoBi compounds have been calculated in the present study.Article Citation - WoS: 48Citation - Scopus: 50Lattice Dynamical and Thermo-Elastic Properties of M2alb (m = V, Nb, Ta) Max Phase Borides(Elsevier Science Sa, 2020) Surucu, Gokhan; Gencer, Aysenur; Wang, Xiaotian; Surucu, OzgeThe structural, electronic, dynamic, and thermo-elastic properties of M2AlB (X = V, Nb, Ta) MAX phase borides were investigated using first principle calculations as implemented in the Vienna Ab-initio Simulation Package (VASP) with the generalized gradient approximation (GGA). The obtained structural properties and formation energies showed the thermodynamic stability and synthesizability of M2AlB. The electronic band structures were determined and they revealed that these compounds had a metallic character. The dynamic stability of M2AlB compounds were investigated with phonon dispersion curves and these compounds were found to be dynamically stable. The elastic constants were also calculated to determine the mechanical stability and to obtain the polycrystalline properties such as bulk modulus, shear modulus, etc. The thermo-elastic properties (thermal expansion coefficient, heat capacity, entropy, and free energy) were studied in a temperature range in between 0 and 1000 K and a pressure range in between 0 and 30 GPa. In addition, the direction dependent sound wave velocities were studied in three dimensions. Moreover, the minimum thermal conductivities and the diffusion thermal conductivities of these compounds were determined. This work is the processor study for the investigation of the main physical properties of M2AlB (M = V, Nb, Ta) ceramic compounds to date. (C) 2019 Elsevier B.V. All rights reserved.
