8 results
Search Results
Now showing 1 - 8 of 8
Article Citation - WoS: 45Citation - Scopus: 46Novel Hybrid Scaffolds for the Cultivation of Osteoblast Cells(Elsevier, 2011) Sasmazel, Hilal TurkogluIn this study, natural biodegradable polysaccharide, chitosan, and synthetic biodegradable polymer, poly(epsilon-caprolactone) (PCL) were used to prepare 3D, hybrid polymeric tissue scaffolds (PCL/chitosan blend and PCL/chitosan/PCL layer by layer scaffolds) by using the electrospinning technique. The hybrid scaffolds were developed through HA addition to accelerate osteoblast cell growth. Characteristic examinations of the scaffolds were performed by micrometer, SEM, contact angle measurement system, ATR-FTIR, tensile machine and swelling experiments. The thickness of all electrospun scaffolds was determined in the range of 0.010 +/- 0.001-0.012 +/- 0.002 mm. In order to optimize electrospinning processes, suitable bead-free and uniform scaffolds were selected by using SEM images. Blending of PCL with chitosan resulted in better hydrophilicity for the PCL/chitosan scaffolds. The characteristic peaks of PCL and chitosan in the blend and layer by layer nanofibers were observed. The PCL/chitosan/PCL layer by layer structure had higher elastic modulus and tensile strength values than both individual PCL and chitosan structures. The layer by layer scaffolds exhibited the PBS absorption values of 184.2; 197.2% which were higher than those of PCL scaffolds but lower than those of PCL/chitosan blend scaffolds. SaOs-2 osteosarcoma cell culture studies showed that the highest ALP activities belonged to novel PCL/chitosan/PCL layer by layer scaffolds meaning better cell differentiation on the surfaces. (C) 2011 Elsevier B.V. All rights reserved.Article Citation - WoS: 39Citation - Scopus: 44A Novel Treatment Strategy for Preterm Birth: Intra-Vaginal Progesterone-Loaded Fibrous Patches(Elsevier, 2020) Cam, Muhammet Emin; Hazar-Yavuz, Ayse Nur; Cesur, Sumeyye; Ozkan, Ozan; Alenezi, Hussain; Sasmazel, Hilal Turkoglu; Edirisinghe, MohanProgesterone-loaded poly(lactic) acid fibrous polymeric patches were produced using electrospinning and pressurized gyration for infra-vaginal application to prevent preterm birth. The patches were intravaginally inserted into rats in the final week of their pregnancy, equivalent to the third trimester of human pregnancy. Maintenance tocolysis with progesterone-loaded patches was elucidated by recording the contractile response of uterine smooth muscle to noradrenaline in pregnant rats. Both progesterone-loaded patches indicated similar results from release and thermal studies, however, patches obtained by electrospinning had smaller average diameters and more uniform dispersion compared to pressurized gyration. Patches obtained by pressurized gyration had better results in production yield and tensile strength than electrospinning; thereby pressurized gyration is better suited for scaled-up production. The patches did not affect cell attachment, viability, and proliferation on Vero cells negatively. Consequently, progesterone-loaded patches are a novel and successful treatment strategy for preventing preterm birth.Article Citation - WoS: 22Citation - Scopus: 24Mechanical and Biological Properties of Al2o3< and Tio2 Co-Doped Zirconia Ceramics(Elsevier Sci Ltd, 2017) Agac, Ozlem; Gozutok, Melike; Sasmazel, Hilal Turkoglu; Ozturk, Abdullah; Park, JongeeVarious amounts (ranging from 0 to 2 wt%) of TiO2 and Al2O3 were mono and co-doped to tetragonal zirconia ceramic containing 3 mol% yttria (3Y-TZP) by mechanical ball milling. Powders were compacted by uniaxial pressing at a pressure of 23 MPa. The compacts were pressureless sintered at 1450 degrees C for 2 h. Density, hardness, fracture toughness, and cell attachment of the co-doped 3Y-TZP ceramics were measured with respect to dopant addition to determine the effects of the kind and amount of dopants on the properties. The results show that density decreased gradually as the amount of dopant was increased. The mechanical properties showed the maximum value when 0.5 wt% TiO2 and 1.0 wt% Al2O3 were co-doped to 3Y-TZP. Crystalline phase formation and microstructural morphology were investigated by XRD and SEM analyses to explain the variations in the properties. Co-doping of TiO2 and Al2O3 to 3Y-TZP did not have an influence on the phases present, but decreased the grain size. The co-doping also affected the cell attachment and the growth on the surface of the zirconia ceramics.Article Citation - WoS: 10Citation - Scopus: 11Functionalization of Nonwoven Pet Fabrics by Water/O2< Plasma for Biomolecule Mediated Cell Cultivation(Wiley-v C H verlag Gmbh, 2010) Sasmazel, Hilal Turkoglu; Manolache, Sorin; Gumusderelioglu, MenemseThe main target of this study was to obtain COOH functionalities on the surface of 3D, nonwoven polyethylene terephthalate fabrics (NWPFs) by using low pressure water/O-2 plasma assisted treatment. The plasma treatments were performed in a cylindrical, capacitively coupled RF-plasma-reactor and then following steps were performed: in situ (oxalyl chloride vapors) gas/solid reaction to convert -OH functionalities into COCl groups; and hydrolysis under open laboratory conditions using air moisture for final-COOH functionalities. COOH and OH functionalities on the surfaces were detected quantitatively by fluorescent labeling techniques. The COOH-functionalized samples were biologically activated with insulin or heparin molecules by using spacer polyoxyethylene bis-amine (PEO). Successful immobilization was checked qualitatively using electron spectroscopy for chemical analysis (ESCA). The average amount of immobilized insulin and heparin onto NWPF surfaces were determined as 146.09 and 4.81 nmol.cm(-2), respectively. Our results showed that water/O-2 plasma assisted treatment worked very well for functionalization and biofunctionalization of 3D NWPF disks comparing with wet-chemistry methods. Cell culture experiments indicated that functionalization of NWPF disks and/or nanotopographies on the disk surfaces were effective on adhesion and proliferation of L929 mouse fibroblasts.Article Citation - WoS: 56Citation - Scopus: 60Atmospheric Plasma Surface Modifications of Electrospun Pcl/Chitosan Hybrid Scaffolds by Nozzle Type Plasma Jets for Usage of Cell Cultivation(Elsevier Science Bv, 2016) Surucu, Seda; Masur, Kai; Sasmazel, Hilal Turkoglu; Von Woedtke, Thomas; Weltmann, Klaus DieterThis paper reports Ar gas, Ar + O-2, Ar + O-2 + N-2 gas mixtures and dry air plasma modifications by atmospheric pressure argon driven kINPen and air driven Diener (PlasmaBeam) plasma jets to alter surface properties of three dimensional (3D), electrospun PCL/Chitosan/PCL layer by layer hybrid scaffolds to improve human fibroblast (MRC5) cell attachment and growth. The characterizations of the samples were done by contact angle (CA) measurements, scanning electron microscopy (SEM), X-Ray Photoelectron spectroscopy (XPS) analysis. The results showed that the plasma modification carried out under dry air and Ar + O-2 + N-2 gas mixtures were altered effectively the nanotopography and the functionality of the material surfaces. It was found that the samples treated with Ar + O-2 + N-2 gas mixtures for 1 min and dry air for 9 min have better hydrophilicity 78.9 degrees + 1.0 and 75.6 degrees + 0.1, respectively compared to the untreated samples (126.5 degrees). Biocompatibility performance of the scaffolds was determined with alamarBlue (aB) assay and MTT assay methods, Giemsa staining, fluorescence microscope, confocal laser scanning microscope (CLSM) and scanning electron microscope (SEM) analyses. The results showed that plasma treated samples increased the hydrophilicity and oxygen functionality and topography of the surfaces significantly, thus affecting the cell viability and proliferation on/within scaffolds. (C) 2016 Elsevier B.V. All rights reserved.Article Citation - WoS: 86Citation - Scopus: 102Coaxial and Emulsion Electrospinning of Extracted Hyaluronic Acid and Keratin Based Nanofibers for Wound Healing Applications(Pergamon-elsevier Science Ltd, 2021) Su, Sena; Bedir, Tuba; Kalkandelen, Cevriye; Basar, Ahmet Ozan; Sasmazel, Hilal Turkoglu; Ustundag, Cem Bulent; Gunduz, OguzhanNovel composites based on poly(epsilon-caprolactone)/polyethylene oxide loaded with hyaluronic acid(HA) and keratin(KR) were produced separately using emulsion and coaxial electrospinning methods. HA and KR were extracted from animal sources, characterized and loaded into coaxial fiber structures as bioactive agents, separately and together. Morphological, chemical, thermal, and mechanical characteristics of the fibers were investigated. According to the SEM results, diameters of smooth and beadless fibers fabricated via emulsion method were at nanoscale (sub-micron) while fibers of coaxial method were at micro scale. Benefitted electrospinning techniques demonstrated that hydrophobic and hydrophilic polymers can be advantageously combined. Core polymer specific FT-IR bands were not visible, their presence was proven with DSC analysis which confirms core-shell morphology of the fibers. In vitro studies exhibited spun mats did not have any cytotoxic effects and the HA and KR incorporated into the fiber structure synergistically increased cell viability and cell proliferation. This study demonstrated that the electrospun fibers containing HA and KR fabricated by both emulsion and coaxial methods can be efficient for wound healing applications.Article Citation - WoS: 90Citation - Scopus: 92Development of Core-Shell Coaxially Electrospun Composite Pcl/Chitosan Scaffolds(Elsevier, 2016) Surucu, Seda; Sasmazel, Hilal TurkogluThis study was related to combining of synthetic Poly (epsilon-caprolactone) (PCL) and natural chitosan polymers to develop three dimensional (3D) PCL/chitosan core-shell scaffolds for tissue engineering applications. The scaffolds were fabricated with coaxial electrospinning technique and the characterizations of the samples were done by thickness and contact angle (CA) measurements, scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-Ray Photoelectron Spectroscopy (XPS) analyses, mechanical and PBS absorption and shrinkage tests. The average inter-fiber diameter values were calculated for PCL (0.717 +/- 0.001 mu m), chitosan (0.660 +/- 0.007 mu m) and PCL/chitosan core-shell scaffolds (0.412 +/- 0.003 mu m), also the average inter-fiber pore size values exhibited decreases of 66.91% and 61.90% for the PCL and chitosan scaffolds respectively, compared to PCL/chitosan core-shell ones. XPS analysis of the PCL/chitosan core-shell structures exhibited the characteristic peaks of PCL and chitosan polymers. The cell culture studies (MTT assay, Confocal Laser Scanning Microscope (CLSM) and SEM analyses) carried out with L929 ATCC CCL-1 mouse fibroblast cell line proved that the biocompatibility performance of the scaffolds. The obtained results showed that the created micro/nano fibrous structure of the PCL/chitosan core-shell scaffolds in this study increased the cell viability and proliferation on/within scaffolds. (C) 2016 Elsevier B.V. All rights reserved.Editorial Editorial: Biofabricated Materials for Tissue Engineering(Frontiers Media Sa, 2024) Sasmazel, Hilal Turkoglu; Gunduz, Oguzhan; Ramalingam, Murugan; Ulag, Songul[No Abstract Available]
