16 results
Search Results
Now showing 1 - 10 of 16
Article Citation - WoS: 52Citation - Scopus: 57Members of Cmy Color Space: Cyan and Magenta Colored Polymers Based on Oxadiazole Acceptor Unit(Amer Chemical Soc, 2012) Ozkut, Merve Icli; Algi, Melek Pamuk; Oztas, Zahide; Algi, Fatih; Onal, Ahmet M.; Cihaner, AtillaIn this study, three novel oxadiazole-based polymers were synthesized and their electrochemical and optical properties were investigated. The polymers were found to have both p- and n-type doping properties accompanied by electrochromic response. Two polymer films exhibit cyan and magenta colors, which constitute two legs of CMY color spaces, in their neutral states and they are soluble in common-organic solvents. According to the color mixing theory, all colors in the visible spectrum including black color can be obtained by using these polymers with a yellow colored electrochromic polymer. Among these polymers, the polymer bearing propyledioxythiophene donor units has some superior properties like high stability (it retains 94% of its electroactivity after 2000 cycles), solubility, and high coloration efficiency (230 cm(2)/C), whereas as expected ethylenedioxythiophene containing one has the lowest band gap as 1.08 eV.Article Citation - WoS: 10Citation - Scopus: 10Synthesis and Electropolymerization of Donor-Acceptor Type Monomers Based on Azobenzene-Substituted Thieno[3,4-C]pyrrole Acceptors(Pergamon-elsevier Science Ltd, 2021) Cakal, Deniz; Cihaner, Atilla; Onal, Ahmet M.By using donor-acceptor-donor approach, a new series of photo responsive and electroactive trimeric monomers, namely (E)-5-(4-(phenyldiazenyl)phenyl)-1,3-di(thiophen-2-yl)-4H-thieno[3,4- c]pyrrole-4,6(5H)-dione (T-2-AB ), (E)-1,3-bis(2,3-dihydrothieno[3,4-b][1,4]dioxin-5-yl)-5-(4-(phenyldiazenyl)phenyl)- 4H-thieno[3,4-c]pyrrole-4,6(5H)-dione (E-2-AB ) and (E)-1,3-bis(3,3-didecyl-3,4-dihydro-2H-thieno[3,4- b][1,4]dioxepin-6-yl)-5-(4-(phenyldiazenyl)phenyl)-4H-thieno[3,4-c]pyrrole-4,6(5H)-dione (P-2-AB ), was synthesized and characterized. The oxidation potential of the monomers was controlled by the strength of donor units and the following trend was observed for them: Eox (T-2-AB ) > E-ox (P-2-AB ) > E-ox (E-2-AB ). Also, a similar behavior was observed for their band gap values: 2.53 eV for T-2-AB , 2.18 eV for E-2-AB and 2.28 eV for P-2-AB . The monomers were polymerized successfully via electrochemical methods in order to give electrochromic ambipolar conjugated polymers bearing narrow optical band gaps: 1.71 eV, 1.54 eV and 1.68 eV for PT2-AB, PE2-AB , and PP2-AB, respectively. Also, the polymer films are stable and robust. Moreover, the three monomers and soluble PP(2-)AB polymer exhibited trans to cis photo-isomerization upon irradiation with UV light. In addition, the photoluminescence intensity of the monomers in toluene was found to decrease with increasing acid concentration, which makes them potential candidates to be amenable as pH sensors. (C) 2021 Elsevier Ltd. All rights reserved.Article Citation - WoS: 8Citation - Scopus: 8Electropolymerization and Ion Sensitivity of Chemiluminescent Thienyl Systems(Pergamon-elsevier Science Ltd, 2009) Asil, Demet; Cihaner, Atilla; Onal, Ahmet M.Redox driven chemiluminescent (CL) compounds based on thienyl and pyridazine systems, namely 2,3-dihydrothieno(3,4-d)pyridazine-1,4-dione (T-Lum) and 5,7-di-thiophen-2-yl-2,3-dihydrothieno[3,4-d]pyridazine-1,4-dione (TTT-Lum), were synthesized. Soluble compounds both in organic media and basic aqueous solution were found to give CL and electroluminescent (EL) reactions by the treatment of oxidants (H2O2 and KMnO4) and by an external potential pulse on the working electrode, respectively. Furthermore, the CL reaction can be speeded up by Fe3+ ion or blood samples. On the other hand, one of the compounds. TTT-Lum, can be polymerized successfully via electrochemically both in 0.1 M LiClO4/acetonitrile containing 5% of borontrifluoro diethylether (BF3-Et2O) and neat BF3-Et2O solution. The corresponding polymer film (PTTT-Lum) bearing CL units has a very stable and a well-defined reversible redox couple. Also, the electrochromic polymer film has a band gap of 1.74 eV and exhibits EL behavior. (C) 2009 Elsevier Ltd. All rights reserved.Article Citation - WoS: 11Citation - Scopus: 11Electrochemical and Optical Properties of Substituted Phthalimide Based Monomers and Electrochemical Polymerization of 3,4-Ethylenedioxythiophene Oligomeric Silsesquioxane (poss) Analogue(Elsevier Sci Ltd, 2019) Cakal, Deniz; Ertan, Salih; Cihaner, Atilla; Onal, Ahmet M.A new series of donor-acceptor-donor type trimeric monomers bearing substituted phthalimide units as acceptor units and thiophene and 3,4-ethylenedioxythiophene (EDOT) as donor units was synthesized and characterized. The strength of acceptor units and intramolecular charge transfer between donor and acceptor units were investigated by using electrochemical and optical methods. The main advantage of phthalimide unit over other acceptor units is the ease of its functionalizability. Thus, utilizing this property, a phthalimide derivative (E2P-POSS) bearing polyhedral oligomeric silsesquioxane (POSS) cage was introduced successfully with EDOT and polymerized electrochemically. The corresponding electroactive polymer, PE2P-POSS, has a band gap of 1.72 eV and is an electrochromic polymer: gray when neutralized and eggplant purple when oxidized.Article Citation - WoS: 14Citation - Scopus: 12Electrochemical Synthesis of New Conjugated Polymers Based on Carbazole and Furan Units(Elsevier Science Sa, 2015) Oguzturk, H. Esra; Tirkes, Seha; Onal, Ahmet M.In this study, synthesis of four new monomers; 3,6-di(2-furyl)-9H-carbazole (M1), 3,6-di(2-furyl)-9-ethyl-carbazole (M2), 2,7-di(2-furyl)-9-H-carbazole (M3), 2,7-di(2-furyl)-9-(tridecan-7-yl)-9H-carbazole (M4), was achieved via Stifle cross-coupling reaction. The monomers were electrochemically polymerized, via repetitive cycling in acetonitrile-tetrabutylammonium hexafluorophosphate electrolytic medium. Optical and electrochemical properties of the monomers and their corresponding polymers were investigated and it was found that optical properties show slight variations depending on the connectivity between the carbazole and furan moieties. However, all the monomers synthesized in this work exhibited an irreversible oxidation peak at around 1.0 V. Electrochemically obtained polymer films, on the other hand, exhibited quasi-reversible redox behavior due to doping/dedoping of the polymers which was accompanied by a reversible electrochromic behavior. Their band gap values (E-g) were elucidated utilizing spectroelectrochemical data and it was found that polymers obtained from 2,7-substituted carbazole derivatives have slightly lower band gap values. Furthermore, scanning electron micrographs were used for morphological examinations. (C) 2015 Elsevier B.V. All rights reserved.Article Citation - WoS: 21Citation - Scopus: 21Synthesis and Electro-Optical Properties of New Conjugated Hybrid Polymers Based on Furan and Fluorene Units(Pergamon-elsevier Science Ltd, 2013) Gunes, Arzu; Cihaner, Atilla; Onal, Ahmet M.A novel series of hybrid monomers containing furan and fluorene units, namely 2-(2-(furan-2-yl)-9H-fluoren-7-yl)furan (FFF), 2,7-di(furan-2-yl)-9H-fluoren-9-one (FOF) and 2-(2-(furan-2-yl)-9,9-dihexyl-9H-fluoren-7-yl)furan (FHF), was synthesized and their electrochemical polymerization was achieved via potential cycling. Optical and electrochemical properties of the polymers, poly(2-(2-(furan-2-yl)9H-fluoren-7-yl)furan (PFFF), poly(2,7-di(furan-2-yl)-9H-fluoren-9-one) (PFOF) and poly(2-(2-(furan2-yl)-9,9-dihexyl-9H-fluoren-7-yl)furan) (PFHF), were investigated and it was found that polymer films exhibited quasi-reversible redox behavior (E-p(ox) =0.92V for PFFF, E-p(ox) = 1.08V for PFOF and E-p(ox) = 0.99V for PFHF) accompanied with a reversible electrochromic behavior, yellow to dark blue for PFFF, orange to green for PFOF and orange to green for PFHF. Their band gap values (E-g) were found to be 2.49, 2.32 and 2.61 eV for PFFF, PFOF and PFHF, respectively. (C) 2012 Elsevier Ltd. All rights reserved.Article Citation - WoS: 30Citation - Scopus: 32Effect of Fluorine Substituted Benzothiadiazole on Electro-Optical Properties of Donor-Acceptor Type Monomers and Their Polymers(Elsevier Sci Ltd, 2020) Cakal, Deniz; Ercan, Yunus Emre; Onal, Ahmet M.; Cihaner, AtillaA series of trimeric monomers bearing thiophene donor units and fluorinated analogues of benzothiadiazole acceptor units was synthesized via donor-acceptor-donor approach and polymerized electrochemically in order to investigate the effect of fluorine atom on electro-optical properties of both monomers and their corresponding polymers. All monomers exhibited solvatochromic and fluorescent properties. The introduction of fluorine atom into the conjugated backbone increased the oxidation potentials. Upon moving from nonfluorinated to fully fluorinated analogues, the oxidation potential shifts anodically from 1.30 V to 1.7 V. As in the case of monomers, the fluorine atom substitution also resulted in a decrease in the HOMO energy level of the corresponding polymers, leading to an increase in the electrochemical band gap energy (1.71-1.97 eV). This result can be attributed to deviations from planarity and also to decrease in the effective conjugation length. The polymeric film also exhibited electrochromic properties under various external potentials. Switching time and coloration efficiency values decreased with increasing number of fluorine atom substitution.Article Citation - WoS: 24Citation - Scopus: 25A Novel Conducting Polymer Based on Terthienyl System Bearing Strong Electron-Withdrawing Substituents and Its Electrochromic Device Application(Elsevier Science Sa, 2008) Asil, Demet; Cihaner, Atilla; Algi, Fatih; Onal, Ahmet M.A novel conducting polymer bearing strong electron-withdrawing substituents (EWS) directly attached to the 3,4-positions of the thiophene ring was synthesized by electrochemical polymerization of diethyl 2,5-di(thiophen-2-yl)thiophene-3,4-dicarboxylate (SSS-Diester). The polymer (PSSS-Diester) was characterized by cyclic voltammetry, FT-IR and UV-vis spectroscopy. The polymer has a reversible redox process and demonstrates a stable electrochromic behavior: reddish orange in the neutral state, brown in the intermediate state and green in the oxidized state. Optical density and response time of the dual-type electrochromic device based on PSSS-Diester were found to be 0.23 and 0.6 s at 623 nm, respectively. It is also noteworthy that the device shows good environmental and redox stability (i.e. 94% of the optical activity of the device retained after 500th switch). (c) 2008 Elsevier B.V. All rights reserved.Article Citation - WoS: 27Citation - Scopus: 27Electrochromic performance and ion sensitivity of a terthienyl based fluorescent polymer(Elsevier, 2010) Atilgan, Nurdan; Cihaner, Atilla; Onal, Ahmet M.A novel terthienyl based fluorescent polymer bearing strong electron-withdrawing substituents directly attached to the 3,4-positions of the central thiophene ring was synthesized by electrochemical polymerization of diethyl 2,5-di(3,4-ethylenedioxythiophen-2-yl)thiophene-3,4-dicarboxylate. The corresponding polymer was characterized by cyclic voltammetry, FT-IR and UV-vis spectroscopy. The polymer has a well-defined redox process (E-p,E-1/2 = 0.74 V) and demonstrates a reversible electrochromic behavior; lilac in the neutral state and transparent sky blue in the oxidized state. Also, the polymer had low band gap (E-g = 1.82 eV) and high redox stability (retaining 94.0% of its electro-activity after 500th switch). Moreover, the sensitivity of both the monomer and its polymer towards metal cations was investigated by monitoring the change in the fluorescence intensity. Among various common ions both the monomer and its polymer were found to be selective towards Cu2+ and Cu+ ions by quenching the fluorescence efficiency with a Stern-Volmer constant (K-sv) of (1.4-1.6 x 10(3) M-1) and (1.5-1.8 x 10(2) M-1) for monomer and polymer solutions, respectively. (c) 2010 Elsevier Ltd. All rights reserved.Article Citation - WoS: 24Citation - Scopus: 23Synthesis and Electrochemical Polymerization of D-A Type Monomers With Thieno [3,4-c] Pyrrole-4,6 Acceptor Unit(Elsevier Sci Ltd, 2018) Cakal, Deniz; Ertan, Salih; Cihaner, Atilla; Onal, Ahmet M.In this study, three new donor-acceptor-donor type monomers bearing 1,3-dibromo-5-(2-ethylhexyl)-4H-thieno [3,4-c]pyrrole- 4,6(5H)-dione (A) as an acceptor unit and thiophene, 3,4-ethylenedioxythiophene (EDOT) and 3,3-didecy1-3,4-dihydro-2H-thieno[3,4-b][1,4]dioxepine (didecyl-ProDOT) as donor units were synthesized via Stille cross-coupling reaction and their electrochemical polymerization by repetitive cycling was reported. The electrochemical and optical properties of the monomers ((5-(2-ethyl-liexyl)-1,3-di(thienyl-2-yl)-4H-thienolr-3,4-cl pyrrole-4,6(5H)-dione (TAT), 1,3-bis(2,3-dihydrothieno[3,4-1)] (1,4]dioicin-5-yl)-5-(2-ethylhexyl)-4H-thieno(3,4-c) pyrrole-4,6-(5H)-dione (EAE) and 1,3-bis(3,3-didecyl-3,4-dihydro-2H-thieno[3,4-1)111,41-dioxepin-6-yl)-5-(2-ethylhexyl)-4H-thieno[3,4-apyrrole-4,6(5H)-dione (PAP)) and their corresponding polymers called PTAT, PEAE and PPAP were investigated and it was found that EDOT units containing monomer and polymer (EAE and PEAE) have lower oxidation potentials and lower band gap value as compared to didecyl-ProDOT and thiophene units containing monomers and polymers (PAP, TAT and PPAP, PTAT). Spectroelectrochemical investigations conducted on electrochemically obtained polymer films revealed that polymer films exhibited electrochromic behaviors: brick red to gray for PTAT, blue/violet to highly sky blue for PEAE and blue to highly light blue for PPAP in their neutral and oxidized states, respectively. Moreover, PAP was also polymerized chemically using FeC13 as an oxidizing agent. Both chemically and electrochemically obtained PPAP were found to be soluble in some organic solvents and their dichloromethane solutions can be reversibly oxidized and reduced using antimony pentachloride and hydrazine hydrate solutions, respectively.
