5 results
Search Results
Now showing 1 - 5 of 5
Article Citation - WoS: 7Citation - Scopus: 7Electrochemical and optical properties of dicyclohexylmethyl substituted poly(3,4-propylenedioxythiophene) analogue(Wiley, 2018) Cakal, Deniz; Cihaner, Atilla; Onal, Ahmet M.An analogue of disubstituted 3,4-propylenedioxythiophenes, namely 3,3-bis(cyclohexylmethyl)-3,4-dihydro-2H-thieno[3,4-b][1,4]dioxepin (ProDOT-CycHex(2)), was synthesized and its electrochemical polymerization was carried out successfully in an electrolyte solution of 0.1 M tetrabutylammonium hexafluorophosphate dissolved in a mixture of acetonitrile and dichloromethane (3/1: v/v). The corresponding polymer called PProDOT-CycHex(2) has a reduced band gap of 1.85 eV and an electrochromic property: blue/violet when neutralized and highly transparent when oxidized. Also, PProDOT-CycHex(2) film exhibited faster response time (0.7 s) and higher coloration efficiency (769 cm(2)/C) during oxidation when compared to its benzyl substituted analogue. (c) 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018, 135, 46214.Article Citation - WoS: 4Citation - Scopus: 4Template-free microsphere and hollow sphere formation of polymethylanilines(Wiley, 2009) Icli, Merve; Onal, Ahmet M.; Cihaner, AtillaBACKGROUND: Microsphere and/or hollow sphere formation of methyl-substituted polyaniline derivatives was investigated via chemical polymerization where different sets of conditions were examined. It was found that a variety of parameters (e.g. types and concentrations of monomer and oxidant, polymerization time, solvent with and without acid) have a crucial influence on the morphology of the resulting polyaniline derivatives. RESULTS: Structures with desired morphologies (with or without microspheres and hollow spheres) may be obtained in a controlled manner by changing the parameters. Moreover, the electrochemical and optical properties of the polymers in the presence of acid and/or base were investigated via cyclic voltammetry and UV-visible and electron spin resonance spectroscopic techniques. It is noteworthy that the morphologies of microspheres and/or hollow spheres remained unchanged after repeated acid and base treatments. CONCLUSION: Micro/hollow spherical structures were successfully prepared via chemical polymerization of various substituted anilines by using ammonium persulfate as oxidant. It was found that the type of oxidant and monomers along with the polymerization time are quite important factors for the formation of micro/hollow spheres. Furthermore, hydrogen bond formation does not play any crucial role for the formation of these spheres. Chemically and electrochemically doped/dedoped states of microspheres and/or hollow spheres are very sensitive, and give rapid response towards vapours of HCl and NH3, which makes them amenable for use in sensors. (c) 2009 Society of Chemical IndustryArticle Citation - WoS: 1Citation - Scopus: 1Electrochemical Polymerization and Characterization of Polyether-Substituted Aniline Derivatives(Wiley, 2007) Tirkes, Seha; Cihaner, Atilla; Oenal, Ahmet M.New compounds consisting of aniline units linked by polyether bridges have been synthesized and their electrochemical polymerization was performed via constant potential electrolysis and cyclic voltammetry in an aqueous solution containing 3.0 moI L-1 H2SO4. Chemical polymerization was carried out using (NH4)(2)S2O8 as oxidizing agent. It was found that both methods gave the same polymer product without any cleavage of the polyether bridge between aniline rings. The polymers were characterized using the Fourier transform infrared spectroscopic technique and the thermal behavior of electrochemically prepared polymers was investigated using thermogravimetric analysis. Spectroelectrochemical properties of the films were investigated using the in situ UV-visible spectroscopic technique. (c) 2007 Society of Chemical Industry.Article Citation - WoS: 12Citation - Scopus: 14A Platform To Synthesize a Soluble Poly(3,4-Ethylenedioxythiophene) Analogue(Wiley, 2017) Ertan, Salih; Kaynak, Cevdet; Cihaner, AtillaAlkyl-substituted polyhedral oligomeric silsesquioxane (POSS) cage is combined with 3,4-ethylenedioxythiophene under the same roof. The corresponding monomer called EDOT-POSS is used to get soluble poly(3,4-ethylenedioxythiophene) (PEDOT-POSS) analogue. Both chemically and electrochemically obtained polymers are soluble in common organic solvents like dichloromethane, chloroform, tetrahydrofuran, and so forth. The PEDOT-POSS has somewhat higher band gap (1.71 eV at 618 nm) than its parent PEDOT (1.60 eV at 627 nm) and as expected the PEDOT-POSS exhibits higher optical contrast (74% at 618 nm) and coloration efficiency (582 cm(2)/C for 100% switching), lower switching time (0.9 s), higher electrochemical stability (93% of its electroactivity retains after 5000 cycles under ambient conditions) when compared to the PEDOT. A number of advantages of the PEDOT-POSS over the PEDOT can make it a promising material in the areas of electro-optical applications. (C) 2017 Wiley Periodicals, Inc.Article Citation - WoS: 13Citation - Scopus: 13[1,2,5]thiadiazolo[3,4-g]quinoxaline Acceptor-Based Donor-Acceptor Polymers: Effect of Strength and Size of Donors on the Band Gap(Wiley, 2017) Gokce, Gurcan; Karabay, Baris; Cihaner, Atilla; Ozkut, Merve IcliElectrochromic polymers based on [1,2,5]thiadiazolo[3,4-g]quinoxaline acceptor and thiophene, 3,4-ethylenedioxythiophene and 3,3-didecyl-3,4-proylenedioxythiophene donors, namely poly(6,7-diphenyl-4,9-di(thiophen-2-yl)-[1,2,5]thiadiazolo[3,4-g]quinoxaline) (P1), poly(4-(2,3-dihydrothieno[3,4-b][1,4]dioxin-5-yl)-9-(2,3-dihydrothieno[3,4-b][1,4]dioxin-7-yl)-6,7-diphenyl-[1,2,5]thiadiazolo[3,4-g]quinoxaline) (P2), and poly(4-(3,3-didecyl-3,4-dihydro-2H-thieno[3,4-b][1,4]dioxepin-6-yl)-9-(3,3-didecyl-3,4-dihydro-2H-thieno[3,4-b][1,4]dioxepin-8-yl)-6,7-diphenyl-[1,2,5]thiadiazolo[3,4-g]quinoxaline) (P3), respectively, were electrochemically and/or chemically synthesized and characterized. Electrochemical and optical properties of the polymers were then investigated. The results, which were obtained electrochemically and optically, indicate that the polymers bearing the same acceptor and different donor units have a band gap range of 0.59-1.24 eV depending on the strength and size of the donor units and band gap determination method. A significant finding in this study was the phenomenon that when the acceptor is physically huge, the general rule that a weak donor would have a high band gap whereas a strong donor would have low band gap can be broken due to the torsional angles/steric hindrances involved with physically large donor molecules. (c) 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017, 55, 3483-3493
