5 results
Search Results
Now showing 1 - 5 of 5
Article Citation - WoS: 51Citation - Scopus: 54Atomic Layer Deposition-sio2 Layers Protected Pdconi Nanoparticles Supported on Tio2 Nanopowders: Exceptionally Stable Nanocatalyst for the Dehydrogenation of Formic Acid(Elsevier Science Bv, 2017) Caner, Nurdan; Bulut, Ahmet; Yurderi, Mehmet; Ertas, Ilknur Efecan; Kivrak, Hilal; Kaya, Murat; Zahmakiran, MehmetTiO2 nanopowders supported trimetallic PdCoNi alloy nanoparticles were simply and reproducibly prepared by wet-impregnation followed by simultaneous reduction method, then to enhance their stability against to sintering and leaching atomic layer deposition (ALD) technique was utilized to grow SiO2 layers amongst these surface bound PdCoNi alloy nanoparticles (PdCoNi/TiO2-ALD-SiO2). These new nanomaterials are characterized by the combination of complimentary techniques and sum of their results exhibited that the formation of ALD-SiO2 layers protected well-dispersed and highly crystalline PdCoNi alloy nanoparticles (ca. 3.52 nm) supported on TiO2 nanopowders. The catalytic performance of the resulting PdCoNi/TiO2-ALD-SiO2 in terms of activity, selectivity and stability was investigated in the dehydrogenation of aqueous formic acid (HCOOH), which has recently been suggested as a promising hydrogen storage material with a 4.4 wt% hydrogen capacity, solution under mild conditions. The results collected from our systematic studies revealed that PdCoNi/TiO2-ALD-SiO2 nanomaterial can act as highly active and selective nanocatalyst in the formic acid dehydrogenation at room temperature by providing an initial turnover frequency (TOF) value of 207 mol H-2/mol metal;: h and >99% of dehydrogenation selectivity at almost complete conversion. More importantly, the catalytic reusability experiments separately carried out with PdCoNi/TiO2-ALD-SiO2 and PdCoNi/TiO2 nanocatalysts in the dehydrogenation of formic acid under more forcing conditions pointed out that PdCoNi/TiO2-ALD-SiO2 nanocatalyst displays unprecedented catalytic stability against to leaching and sintering throughout the reusability experiments it retains almost its inherent activity, selectivity and conversion even at 20th reuse, whereas analogous PdCoNi/TiO2 completely lost its catalytic performance. (C) 2017 Elsevier B.V. All rights reserved.Article Citation - WoS: 150Citation - Scopus: 152Pd-mnox< Nanoparticles Dispersed on Amine-Grafted Silica: Highly Efficient Nanocatalyst for Hydrogen Production From Additive-Free Dehydrogenation of Formic Acid Under Mild Conditions(Elsevier Science Bv, 2015) Bulut, Ahmet; Yurderi, Mehmet; Karatas, Yasar; Zahmakiran, Mehmet; Kivrak, Hilal; Gulcan, Mehmet; Kaya, MuratHerein we report the development of a new highly active, selective and reusable nanocatalyst for additive-free dehydrogenation of formic acid (HCOOH), which has great potential as a safe and convenient hydrogen carrier for fuel cells, under mild conditions. The new catalyst system consisting of bimetallic Pd-MnOx nanoparticles supported on aminopropyl functionalized silica (Pd-MnOx/SiO2-NH2) was simply and reproducibly prepared by deposition-reduction technique in water at room temperature. The characterization of Pd-mnO(x)/SiO2-NH2 catalyst was done by the combination of multipronged techniques, which reveals that the existence of highly crystalline individually nucleated Pd(0) and MnOx nanoparticles (d(mean) = 4.6 +/- 1.2 nm) on the surface of aminopropyl functionalized silica. These supported Pd-MnOx nanoparticles can catalyze the additive-free dehydrogenation of formic acid with record activity (TOF = 1300 h(-1)) at high selectivity (>99%) and conversion (>99%) under mild conditions (at 50 degrees C and under air). Moreover, easy recovery plus high durability of these supported Pd-MnOx nanoparticles make them a reusable heterogeneous catalyst in the additive-free dehydrogenation of formic acid. (C) 2014 Elsevier B.V. All rights reserved.Article Citation - WoS: 125Citation - Scopus: 130Pdau-mnox< Nanoparticles Supported on Amine-Functionalized Sio2 for the Room Temperature Dehydrogenation of Formic Acid in the Absence of Additives(Elsevier Science Bv, 2016) Karatas, Yasar; Bulut, Ahmet; Yurderi, Mehmet; Ertas, Ilknur Efecan; Alal, Orhan; Gulcan, Mehmet; Zahmakiran, MehmetFormic acid (HCOOH) has recently been suggested as a promising hydrogen carrier for fuel cell applications. However efficient hydrogen production through the decomposition of formic acid in the absence of additives under mild thermodynamic conditions constitutes a major challenge because of the ease poisoning of active metals with CO formed as intermediate during formic acid decomposition. Recently, we have reported (App. Catal. B: Env. 164 (2015) 324) our discovery that the separately nucleated MnOx nanoparticles act as CO-sponge around catalytically active Pd nanoparticles exist on the same support and enhances both the activity and CO-resistivity of Pd nanoparticles. Using this important finding, herein, we present a new catalyst system consists of the physical mixture of PdAu alloy and MnOx nanoparticles supported on amine-grafted silica (PdAu-MnOx/N-SiO2) for the room temperature dehydrogenation of formic acid in the absence of any additives. PdAu-MnOx/N-SiO2 catalyst was simply prepared by deposition-reduction technique in water at room temperature with high reproducibility and characterized by the combination of various spectroscopic tools including ICP-OES, P-XRD, DR/UV-vis, XPS, BFTEM, STEM-EDX, STEM-line analysis and CO-stripping voltammetry techniques. The sum of their results shows that the formation of physical mixture of PdAu alloy and MnOx (dmean=2.2 nm) nanoparticles on the surface of support material. This new catalytic material facilitates the hydrogen liberation through the additive-free formic acid dehydrogenation at room temperature with previously unprecedented activity (TOF=785 mol H-2 mol catalyst(-1) h(-1)), converging to that of the existing state of the art homogenous catalysts. This new superior catalytic system enables facile catalyst recovery and very high stability against agglomeration, leaching and CO poisoning, which make it highly reusable catalyst (retains >92% activity and 85% conversion at the 5th catalytic reuse) in the additive-free formic acid dehydrogenation at room temperature. (C) 2015 Elsevier B.V. All rights reserved.Article Citation - WoS: 125Citation - Scopus: 133Supported Copper-Copper Oxide Nanoparticles as Active, Stable and Low-Cost Catalyst in the Methanolysis of Ammonia-Borane for Chemical Hydrogen Storage(Elsevier Science Bv, 2015) Yurderi, Mehmet; Bulut, Ahmet; Ertas, Ilknur Efecan; Zahmakiran, Mehmet; Kaya, MuratThe physical mixture of copper (Cu) copper(I) oxide (Cu2O) and copper(II) oxide (CuO) nanoparticles supported on activated carbon (Cu-Cu2O-CuO/C) were reproducibly prepared by a simple deposition-reduction technique without using any stabilizer in water at room temperature. The characterization of the resulting material by ICP-OES, P-XRD, XPS, DR-UV/vis, BFTEM and HRTEM techniques reveals that the formation of well-dispersed highly crystalline 3.8 +/- 1.7 nm nanoparticles on the surface of activated carbon. These carbon supported Cu-Cu2O-CuO nanoparticles were employed as heterogeneous catalyst in the methanolysis of ammonia-borane (NH3BH3), which has been considered as one of the attractive materials for the efficient storage of hydrogen, under mild conditions. We found that only 3.0 mol % Cu-Cu2O-CuO/C catalyst is enough to catalyze the methanolysis of ammonia-borane with high activity (TOF = 24 min(-1)) and conversion (>99%) at room temperature. More importantly, the exceptional stability of supported Cu-Cu2O-CuO nanoparticles against to sintering and leaching make Cu-Cu2O-CuO/C recyclable catalyst for the methanolysis of ammonia-borane. Cu-Cu2O-CuO/C catalyst retains >76% of its initial activity with 94% of conversion even at 8th recycle in the methanolysis of ammonia-borane at complete conversion. The study reported here also includes the collection of kinetic data for Cu-Cu2O-CuO/C catalyzed methanolysis of ammonia-borane depending on catalyst [Cu], substrate [NH3BH3] concentrations and temperature to determine the rate expression and the activation parameters (E-a, Delta H-#, and Delta S-#) of the catalytic reaction. (C) 2014 Published by Elsevier B.V.Article Citation - WoS: 148Citation - Scopus: 152Carbon Supported Trimetallic Pdniag Nanoparticles as Highly Active, Selective and Reusable Catalyst in the Formic Acid Decomposition(Elsevier Science Bv, 2014) Yurderi, Mehmet; Bulut, Ahmet; Zahmakiran, Mehmet; Kaya, MuratTrimetallic PdNiAg nanoparticles supported on activated carbon were simply and reproducibly prepared by wet-impregnation followed by simultaneous reduction method without using any stabilizer at room temperature. The characterization of the resulting material was done by the combination of complimentary techniques and the sum of their results shows that the formation of well-dispersed 5.6 +/- 2.2 nm PdNiAg nanoparticles in alloy form on the surface of activated carbon. These carbon supported PdNiAg nanoparticles were employed as heterogeneous catalyst in the catalytic decomposition of formic acid, which has great potential as a safe and convenient hydrogen carrier for fuel cells, under mild conditions. It was found that PdNiAg/C can catalyze the dehydrogenation of formic acid with high selectivity (similar to 100%) and activity (TOF = 85 h(-1)) at 50 degrees C. More importantly, the exceptional stability of PdNiAg nanoparticles against to agglomeration, leaching and CO poisoning make PdNiAg/C reusable catalyst in the formic acid dehydrogenation. PdNiAg/C catalyst retains almost its inherent activity (>94%) even at 5th reuse in the dehydrogenation of formic acid with high selectivity (similar to 100%) at complete conversion. The work reported here also includes the compilation of kinetic data for PdNiAg/C catalyzed dehydrogenation of formic acid depending on catalyst [PdNiAg], substrate [HCOOH], promoter [HCOONa] concentrations and temperature to determine the rate expression and the activation parameters (Ea, Delta H-#, and Delta S-#) of the catalytic reaction. (C) 2014 Elsevier B.V. All rights reserved.
