33 results
Search Results
Now showing 1 - 10 of 33
Article Citation - WoS: 9Citation - Scopus: 12On the Performance of Energy Criterion Method in Wi-Fi Transient Signal Detection(Mdpi, 2022) Mohamed, Ismail; Dalveren, Yaser; Catak, Ferhat Ozgur; Kara, AliIn the development of radiofrequency fingerprinting (RFF), one of the major challenges is to extract subtle and robust features from transmitted signals of wireless devices to be used in accurate identification of possible threats to the wireless network. To overcome this challenge, the use of the transient region of the transmitted signals could be one of the best options. For an efficient transient-based RFF, it is also necessary to accurately and precisely estimate the transient region of the signal. Here, the most important difficulty can be attributed to the detection of the transient starting point. Thus, several methods have been developed to detect transient start in the literature. Among them, the energy criterion method based on the instantaneous amplitude characteristics (EC-a) was shown to be superior in a recent study. The study reported the performance of the EC- a method for a set of Wi-Fi signals captured from a particular Wi-Fi device brand. However, since the transient pattern varies according to the type of wireless device, the device diversity needs to be increased to achieve more reliable results. Therefore, this study is aimed at assessing the efficiency of the EC-a method across a large set ofWi-Fi signals captured from variousWi-Fi devices for the first time. To this end, Wi-Fi signals are first captured from smartphones of five brands, for a wide range of signalto-noise ratio (SNR) values defined as low (3 to 5 dB), medium (5 to 15 dB), and high (15 to 30 dB). Then, the performance of the EC-a method and well-known methods was comparatively assessed, and the efficiency of the EC-a method was verified in terms of detection accuracy.Article Citation - WoS: 9Multipath Exploitation in Emitter Localization for Irregular Terrains(Spolecnost Pro Radioelektronicke inzenyrstvi, 2019) Dalveren, Yaser; Kara, AliElectronic Support Measures (ESM) systems have many operational challenges while locating radar emitter's position around irregular terrains such as islands due to multipath scattering. To overcome these challenges, this paper addresses exploiting multipath scattering in passive localization of radar emitters around irregular terrains. The idea is based on the use of multipath scattered signals as virtual sensor through Geographical Information System (GIS). In this way, it is presented that single receiver (ESM receiver) passive localization can be achieved for radar emitters. The study is initiated with estimating candidate multipath scattering centers over irregular terrain. To do this, ESM receivers' Angle of Arrival (AOA) and Time of Arrival (TOA) information are required for directly received radar pulses along with multipath scattered pulses. The problem then turns out to be multiple-sensor localization problem for which Time Difference of Arrival (TDOA)-based techniques can easily be applied. However, there is high degree of uncertainty in location of candidate multipath scattering centers as the multipath scattering involves diffuse components over irregular terrain. Apparently, this causes large localization errors in TDOA. To reduce this error, a reliability based weighting method is proposed. Simulation results regarding with a simplified 3D model are also presented.Article Citation - WoS: 14Citation - Scopus: 26Deep Learning-Based Vehicle Classification for Low Quality Images(Mdpi, 2022) Tas, Sumeyra; Sari, Ozgen; Dalveren, Yaser; Pazar, Senol; Kara, Ali; Derawi, MohammadThis study proposes a simple convolutional neural network (CNN)-based model for vehicle classification in low resolution surveillance images collected by a standard security camera installed distant from a traffic scene. In order to evaluate its effectiveness, the proposed model is tested on a new dataset containing tiny (100 x 100 pixels) and low resolution (96 dpi) vehicle images. The proposed model is then compared with well-known VGG16-based CNN models in terms of accuracy and complexity. Results indicate that although the well-known models provide higher accuracy, the proposed method offers an acceptable accuracy (92.9%) as well as a simple and lightweight solution for vehicle classification in low quality images. Thus, it is believed that this study might provide useful perception and understanding for further research on the use of standard low-cost cameras to enhance the ability of the intelligent systems such as intelligent transportation system applications.Article From Street Canyons To Corridors: Adapting Urban Propagation Models for an Indoor IQRF Network(MDPI, 2025) Doyan, Talip Eren; Yalcinkaya, Bengisu; Dogan, Deren; Dalveren, Yaser; Derawi, MohammadAmong wireless communication technologies underlying Internet of Things (IoT)-based smart buildings, IQRF (Intelligent Connectivity Using Radio Frequency) technology is a promising candidate due to its low power consumption, cost-effectiveness, and wide coverage. However, effectively modeling the propagation characteristics of IQRF in complex indoor environments for simple and accurate network deployment remains challenging, as architectural elements like walls and corners cause substantial signal attenuation and unpredictable propagation behavior. This study investigates the applicability of a site-specific modeling approach, originally developed for urban street canyons, to characterize peer-to-peer (P2P) IQRF links operating at 868 MHz in typical indoor scenarios, including line-of-sight (LoS), one-turn, and two-turn non-line-of-sight (NLoS) configurations. The received signal powers are compared with well-known empirical models, including international telecommunication union radio communication sector (ITU-R) P.1238-9 and WINNER II, and ray-tracing simulations. The results show that while ITU-R P.1238-9 achieves lower prediction error under LoS conditions with a root mean square error (RMSE) of 5.694 dB, the site-specific approach achieves substantially higher accuracy in NLoS scenarios, maintaining RMSE values below 3.9 dB for one- and two-turn links. Furthermore, ray-tracing simulations exhibited notably larger deviations, with RMSE values ranging from 7.522 dB to 16.267 dB and lower correlation with measurements. These results demonstrate the potential of site-specific modeling to provide practical, computationally efficient, and accurate insights for IQRF network deployment planning in smart building environments.Article Quality of Service Assessment: a Case Study on Performance Benchmarking of Cellular Network Operators in Turkey(2015) Kadıoğlu, Rana; Dalveren, Yaser; Kara, AliAbstract: This paper presents findings on performance benchmarking of cellular network operators in Turkey. Bench- marking is based on measurements of standard key performance indicators (KPIs) in one of the metropolitan cities of Turkey, Ankara. Performance benchmarking is formulated by incorporating customer perception by conducting surveys on how important KPIs are from the user s point of view. KPIs are measured, with standard test equipment, by drive test method on specified routes. According to the performance benchmarking results, the GSM and UMTS network operators achieving the best performance were determined in Ankara. Speech qualities of network operators, as the most popular service, were also evaluated by several statistical methods including pdf/cdf analysis and chi-square and Fisher s exact tests. The network operator providing the highest speech quality in Ankara was determined with the methods applied. Overall, the results and approaches on benchmarking of cellular networks in Turkey are reported for the first time in this paper. The approaches proposed in this paper could be adapted to wide-scale benchmarking of services in cellular networks.Article Citation - WoS: 2Citation - Scopus: 3Modelling and Design of Pre-Equalizers for a Fully Operational Visible Light Communication System(Mdpi, 2023) Bostanoglu, Murat; Dalveren, Yaser; Catak, Ferhat Ozgur; Kara, AliNowadays, Visible Light Communication (VLC) has gained much attention due to the significant advancements in Light Emitting Diode (LED) technology. However, the bandwidth of LEDs is one of the important concerns that limits the transmission rates in a VLC system. In order to eliminate this limitation, various types of equalization methods are employed. Among these, using digital pre-equalizers can be a good choice because of their simple and reusable structure. Therefore, several digital pre-equalizer methods have been proposed for VLC systems in the literature. Yet, there is no study in the literature that examines the implementation of digital pre-equalizers in a realistic VLC system based on the IEEE 802.15.13 standard. Hence, the purpose of this study is to propose digital pre-equalizers for VLC systems based on the IEEE 802.15.13 standard. For this purpose, firstly, a realistic channel model is built by collecting the signal recordings from a real 802.15.13-compliant VLC system. Then, the channel model is integrated into a VLC system modeled in MATLAB. This is followed by the design of two different digital pre-equalizers. Next, simulations are conducted to evaluate their feasibility in terms of the system's BER performance under bandwidth-efficient modulation schemes, such as 64-QAM and 256-QAM. Results show that, although the second pre-equalizer provides lower BERs, its design and implementation might be costly. Nevertheless, the first design can be selected as a low-cost alternative to be used in the VLC system.Article Mükemmel İletken Silindir Modeli ile 28 Ghz’de İç Mekân Linklerini Bloke Eden İnsanların Etkilerinin İrdelenmesi(2020) Dalveren, Yaser; Kara, AliLiteratürde, kısa mesafe iç mekân haberleşme linklerinde insan vücudu blokajının sebep olduğu kaybıntahmininde matematiksel olarak sade bir yapıya sahip olması sebebiyle Çift Bıçak Kenarlı Kırınım (ÇBKK)modeli sıklıkla kullanılmaktadır. Fakat modelde insan vücudu benzetimi için kullanılan dikdörtgensel ekran,insan vücudu fiziğini temsil etmek için yeterli olmayabilir. Bu durum, özellikle çoklu insan vücudu blokajıolması durumunda, modelin tahmin doğruluğunu olumsuz etkileyebilir. Öte yandan, insan vücudu benzetimindeGeometrik Kırınım Teorisi (GKT) temelli mükemmel iletken silindir modeli, literatürde sıklıkla kullan bir diğermodeldir. Ancak bu modelin, çoklu insan vücudu blokajı durumunda, yayılım kaybını tahmin etmedeki etkisihenüz çalışılmamıştır. Bu nedenle, sunulan bu kısa çalışmadaki amaç, iletken silindir modelinin, 5G için tahsisedilmesi en muhtemel frekans bantlarından biri olan 28 GHz’de, çoklu insan vücudu blokajının neden olduğukısa mesafe iç mekân linklerindeki yayılım kaybını tahmin etmedeki doğruluğunu irdelemektir. Bu amaçla,öncelikle, kısa mesafe iç mekân linki bir insan vücudu ile tamamen bloklanmış; aynı anda, link yakınındakibaşka bir insan vücudu linke yaklaştırılarak ölçümler yapılmıştır. Sonrasında, yayılım kaybını tahmin etmek içinGKT ve ÇBKK modelinden faydalanılmıştır. Tahmin doğruluğu analizi için simülasyon ve ölçüm sonuçlarıkarşılaştırılmıştır. Sonuç olarak deneysel çalışmalar ile literatürde ilk defa, çoklu insan vücudu blokajının GKTmodeli ile tahmin doğruluğunun arttığı gözlemlenmiştir.Article Citation - WoS: 8Citation - Scopus: 9Propagation Measurements for Iqrf Network in an Urban Environment(Mdpi, 2022) Bouzidi, Mohammed; Dalveren, Yaser; Mohamed, Marshed; Dalveren, Yaser; Moldsvor, Arild; Cheikh, Faouzi Alaya; Derawi, Mohammad; Dalveren, Yaser; Department of Electrical & Electronics Engineering; Department of Electrical & Electronics EngineeringRecently, IQRF has emerged as a promising technology for the Internet of Things (IoT), owing to its ability to support short- and medium-range low-power communications. However, real world deployment of IQRF-based wireless sensor networks (WSNs) requires accurate path loss modelling to estimate network coverage and other performances. In the existing literature, extensive research on propagation modelling for IQRF network deployment in urban environments has not been provided yet. Therefore, this study proposes an empirical path loss model for the deployment of IQRF networks in a peer-to-peer configured system where the IQRF sensor nodes operate in the 868 MHz band. For this purpose, extensive measurement campaigns are conducted outdoor in an urban environment for Line-of-Sight (LoS) and Non-Line-of-Sight (NLoS) links. Furthermore, in order to evaluate the prediction accuracy of well-known empirical path loss models for urban environments, the measurements are compared with the predicted path loss values. The results show that the COST-231 Walfisch-Ikegami model has higher prediction accuracy and can be used for IQRF network planning in LoS links, while the COST-231 Hata model has better accuracy in NLoS links. On the other hand, the effects of antennas on the performance of IQRF transceivers (TRs) for LoS and NLoS links are also scrutinized. The use of IQRF TRs with a Straight-Line Dipole Antenna (SLDA) antenna is found to offer more stable results when compared to IQRF (TRs) with Meander Line Antenna (MLA) antenna. Therefore, it is believed that the findings presented in this article could offer useful insights for researchers interested in the development of IoT-based smart city applications.Conference Object Citation - WoS: 8Using E-Learning in Enterprise Resource Planning (erp) Training: a Case Study To Assist Curriculum Designers in Turkey(Elsevier Science Bv, 2014) Dalveren, YaserThis article presents results of a research on integration of Enterprise Resource Planning (ERP) e-Learning model into the university curriculum. The study presented in this article aims to propose ERP e-Learning models to curriculum designers in Turkey. For this purpose, developed ERP e-Learning models are gathered from the literature although there only few ERP e-Learning models exist in the open literature. Presented ERP e-Learning models are compared, similarities and differences are discussed. From the results, ERP e-Learning models provide an innovative and effective education. This means, these technological models provide greater flexibility to the students and maximizes student learning outcomes when compared to ordinary learning. It seems that utilization of an e-Learning model in ERP training should be started from the universities. (C) 2013 The Authors. Published by Elsevier Ltd.Article Citation - WoS: 29Citation - Scopus: 33On the Performance of Variational Mode Decomposition-Based Radio Frequency Fingerprinting of Bluetooth Devices(Mdpi, 2020) Aghnaiya, Alghannai; Dalveren, Yaser; Kara, AliRadio frequency fingerprinting (RFF) is one of the communication network's security techniques based on the identification of the unique features of RF transient signals. However, extracting these features could be burdensome, due to the nonstationary nature of transient signals. This may then adversely affect the accuracy of the identification of devices. Recently, it has been shown that the use of variational mode decomposition (VMD) in extracting features from Bluetooth (BT) transient signals offers an efficient way to improve the classification accuracy. To do this, VMD has been used to decompose transient signals into a series of band-limited modes, and higher order statistical (HOS) features are extracted from reconstructed transient signals. In this study, the performance bounds of VMD in RFF implementation are scrutinized. Firstly, HOS features are extracted from the band-limited modes, and then from the reconstructed transient signals directly. Performance comparison due to both HOS feature sets is presented. Moreover, the lower SNR bound within which the VMD can achieve acceptable accuracy in the classification of BT devices is determined. The approach has been tested experimentally with BT devices by employing a Linear Support Vector Machine (LSVM) classifier. According to the classification results, a higher classification performance is achieved (similar to 4% higher) at lower SNR levels (-5-5 dB) when HOS features are extracted from band-limited modes in the implementation of VMD in RFF of BT devices.
