2 results
Search Results
Now showing 1 - 2 of 2
Article Citation - WoS: 2Citation - Scopus: 2Biosorption of Reactive Dyes by Novel Bacterium Leclercia Adecarboxylata: Complete Removal of Reactive Black 5 and Molecular Insights Into the Adsorption Mechanism(Wiley, 2025) Sen, Seda; Korkmaz, Filiz; Kilic, Nur KocberberLeclercia adecarboxylata isolated from the D & uuml;den Waterfall (Turkey) was utilized as a biosorbent for the removal of Reactive Black 5 (RB5), Setazol Blue BRF-X (BRF-X), Setazol Navy Blue SBG (SNB), and Setazol Turquoise Blue G (STBG). Of the dyes, RB5 was removed with the highest efficiency, 97.4% after 60 min. The effect of parameters such as pH (3-9), initial biosorbent dose (0.1-2.0 g/L), and initial dye concentration (25-1200 mg/L) on the biosorption of RB5 was investigated. Increasing the biosorbent dosage from 0.1 to 2.0 g/L enhanced the RB5 removal from 55.3% to 100% within 10 min. The complete removal (100%) of RB5 was achieved in media with 2.0 g/L biosorbent and 25 mg/L RB5 at pH 3 after 10 min. Additionally, the soluble extracellular polymeric substances (EPS) of L. adecarboxylata were found to consist of proteins, lipids, nucleic acids, and polysaccharides according to Fourier transform infrared spectroscopy (FTIR) analysis. The EPS was found to play a crucial role in dye removal, forming chemical interactions with dye molecules. Zeta potential analysis was used to evaluate the charge distribution on the biosorbent surface (-12.6 +/- 1.1 mV) and its interactions in the biosorption process. Kinetic and isotherm models suggested a complex interaction mechanism between the biomass and the dye. Adsorption isotherm data were analyzed via nine isotherm models. Among them, the Hill model was found to be the best fit for describing the equilibrium adsorption process of the RB5 (R2 = 0.9993). Overall, the applied models elucidated the influence of both physical and chemical interactions on the mechanism. Kinetic studies revealed that the adsorption of RB5 fit a pseudo-second-order kinetic model. The unique biochemical composition of the indigenous L. adecarboxylata biosorbent provided a high affinity for RB5, offering a sustainable, rapid, and economical solution for the treatment of dye-polluted water.Article Citation - WoS: 168Citation - Scopus: 186Heavy Metal Removal Investigation in Conventional Activated Sludge Systems(C Ej Publishing Group, 2020) Buaisha, Magdi; Balku, Saziye; Ozalp-Yaman, SenizThe combination of industrial and domestic wastewater in municipal WWTPs (waste water treatment plants) may be economically profitable, but it increases the difficulty of treatment, and also has some detrimental effects on the biomass and causes a low-quality final effluent. The present study evaluates the treatment process both in the presence and absence of heavy metals using ASM3 (activated sludge model no.3) so as to improve the model by means of incorporating other novel inhibitory kinetic and settler models. The results reveal that the presence of heavy metal, a case study for copper and cadmium at a concentration of 0.7 mgL(-1) in a biological treatment system has a negative effect on heterotrophic bacteria concentration by 25.00 %, and 8.76 % respectively. Meanwhile, there are no important changes in COD (chemical oxygen demand), SS (total suspended solids) and TN (total nitrogen) in the final effluent in the conventional system. However, all these parameters are acceptable and consistent with EU Commission Directives. The results indicate that ASM3 can predict and provide an opportunity of the operation for an activated sludge wastewater treatment plant that receives the effluent from an industrial plant.
