38 results
Search Results
Now showing 1 - 10 of 38
Article Citation - WoS: 15Citation - Scopus: 21Tool-Life Modelling of Carbide and Ceramic Cutting Tools Using Multi-Linear Regression Analysis(Sage Publications Ltd, 2006) Amaitik, S. M.; Tasgin, T. T.; Kilic, S. E.This paper presents a study for the development of tool-life models for machining operations by means of a statistical approach called multi-linear regression analysis. The study was applied to a milling process for machining SAE 121 cast iron in a factory without interrupting the mass production. Different cutting tool materials under dry conditions were used in the cutting tests. Several machining experiments were performed and mathematical models for tool life have been postulated by using least-square regression analysis. The analysis was based on a first-order model in which the tool life is expressed as a function of two independent variables; cutting speed and feed rate. Analysis of variance was applied to check the adequacy of the mathematical models and their respective parameters. In order to demonstrate the usefulness of the developed models, tool-life contours have been generated and presented in different plots.Article Citation - WoS: 4Citation - Scopus: 5Numerical Investigation of Store Separation From Cavity Problems at High Speeds(Sage Publications Ltd, 2023) Abuhanieh, Saleh; Akay, Hasan U.In this work, the ability of open-source CFD tools to conduct store separation simulations from cavities is evaluated and validated using a generic test case from the literature. Firstly, the ability and accuracy of these tools for solving cavity flows at high speeds are evaluated. Secondly, their competence in predicting the trajectory of a generic store from a generic deep cavity is checked. Finally, and in order to reduce the associated computational costs, a release-time dependability factor from the recent literature is studied and evaluated. The obtained results using the selected open-source CFD tools matched quite well with the wind tunnel results. Furthermore, the results show that predicting the release-time dependability using a quantified index/factor can be a potential remedy for reducing the computational cost for this type of CFD simulations.Article Citation - WoS: 7Citation - Scopus: 9Reliability of the Two-Unit Priority Standby System Revisited(Sage Publications Ltd, 2022) Eryilmaz, Serkan; Finkelstein, MaximThis paper deals with reliability assessment of the repairable two-unit cold standby system when the first, main unit has the better performance level than the second one. Therefore, after its repair, the main unit is always switched into operation. The new Laplace transform representation for the system's lifetime is obtained for arbitrary operation and repair time distributions of the units. For some particular cases, the Laplace transform of the system is shown to be rational, which enables the use of the matrix-exponential distributions for obtaining relevant reliability indices. The discrete setup of the model is also considered through the corresponding matrix-geometric distributions, which are the discrete analogs of the matrix-exponential distributions.Article Citation - WoS: 1Citation - Scopus: 2Change of Frontal Sinus in Age of According To the International Frontal Sinus Anatomy Classification(Sage Publications Ltd, 2023) Koksal, Ali; Demir, Berin Tugtag; Cankal, FatihBackground The radiological and surgical anatomy of the frontal sinus should be well-known in all age groups to successfully manage frontal sinus diseases and reduce the risk of complications in sinus surgery. Purpose To define frontal sinus and frontal cells according to the International Frontal Sinus Anatomy Classification (IFAC) criteria in pediatrics and adults. Material and Methods A total of 320 frontal recess regions of 160 individuals (80 pediatric, 80 adults) who underwent a computed tomography (CT) scan of the paranasal sinus (PNS) were included in the study. Agger nasi cells, supra agger cells, supra agger frontal cells, suprabullar cells, suprabullar frontal cells, supraorbital ethmoid cells, and frontal septal cells were evaluated in the CT analysis. Results The incidence rates of the investigated cells were determined to be 93.1%, 41.9%, 60.0%, 76.3%, 58.5%, 18.8%, and 0% in the pediatric group, respectively, and 86.3%, 35.0%, 44.4%, 54.4%, 46.9%, 19.4%, and 3.4% in the adult group, respectively. Considering the unilateral and bilateral incidence of the cells, agger nasi cells were highly observed bilaterally in both the pediatric group (89.87%) and the adult group (86.48%). Conclusion Our study results show that IFAC can be used as a guide to increase the chance of surgical treatment in the pediatric and adult groups and that the prevalence of frontal cells can be determined radiologically and contributes to the generation of estimations of the prevalence of frontal cells.Article Citation - WoS: 8Citation - Scopus: 10Computing Reliability Indices of a Wind Power System Via Markov Chain Modelling of Wind Speed(Sage Publications Ltd, 2024) Eryilmaz, Serkan; Bulanik, Irem; Devrim, YilserStatistical modelling of wind speed is of great importance in the evaluation of wind farm performance and power production. Various models have been proposed in the literature depending on the corresponding time scale. For hourly observed wind speed data, the dependence among successive wind speed values is inevitable. Such a dependence has been well modelled by Markov chains. In this paper, the use of Markov chains for modelling wind speed data is discussed in the context of the previously proposed likelihood ratio test. The main steps for Markov chain based modelling methodology of wind speed are presented and the limiting distribution of the Markov chain is utilized to compute wind speed probabilities. The computational formulas for reliability indices of a wind farm consisting of a specified number of wind turbines are presented through the limiting distribution of a Markov chain. A case study that is based on real data set is also presented.Article Citation - WoS: 1Citation - Scopus: 1Flame Retarded Plasticized Poly(lactic Acid) Using Phosphorus-Based Additives(Sage Publications Ltd, 2024) Yesil, Sertan; Aytac, Ayse; Selim, FatmaIn this study, the synergistic effect of the flame-retardant additives on the properties of poly(lactic acid) (PLA) was investigated and at the same time, it was tried to increase the toughness of PLA by adding small amounts of phosphate-based additives to plasticized PLA as binary and ternary mixtures. Poly(ethylene glycol) (PEG) was used as a plasticizer. As flame retardant additives, ammonium polyphosphate (APP), tri-phenyl phosphate (TPP), and boron phosphate (BP) were used. Characterization of the composites was carried out by tensile test, impact test, differential scanning calorimetry (DSC), thermal gravimetric analyses (TGA), scanning electron microscopy (SEM), limiting oxygen index (LOI), and UL-94 horizontal burning tests. In addition, TGA-FTIR analyses were carried out to understand the thermal degradation mechanism of composites during combustion. According to the SEM micrographs of the burnt surfaces of the samples, a smooth and flat structure is observed in PLA/PEG/5TPP-5BP sample, while a porous structure and branching formations are observed in other composite samples. Among the composite samples, the best flame retardancy features were observed in the composite containing PLA/PEG/5APP-2.5TPP-2.5BP sample, and the highest impact strength and elongation at break values were obtained in the composite containing PLA/PEG/5APP-5TPP sample.Article Citation - WoS: 22Citation - Scopus: 24Reliability Analysis of Weighted-K System Consisting of Three-State Components(Sage Publications Ltd, 2019) Eryilmaz, Serkan; Bozbulut, Ali RizaThe reliability of a weighted-k-out-of-n system that consists of three-state components is studied. The system is assumed to comprise n three-state components, namely, perfect functioning, partial working, and complete failure and functions if the total weight of all the working components is at least k. Reliability expressions are presented when the times spent by components in perfect functioning and partial working states are dependent with a given joint distribution. Sufficient conditions are also provided to compare the expected total weights of two systems.Article The Mediating Role of Self-Compassion in the Relationship between Postpartum Depression and Breastfeeding Self-Efficacy(Sage Publications Ltd, 2025) Akdag Topal, Cansu; Mert Karadas, Merve; Karakurt, Irem; Boztepe, HandanPostpartum depression (PPD) may adversely affect breastfeeding self-efficacy, yet the underlying mechanisms remain unclear. This study explored whether self-compassion mediates the relationship between PPD and breastfeeding self-efficacy among Turkish women. An expert model was developed based on validated scales: the Self-Compassion Scale, the Edinburgh Postpartum Depression Scale, and the Postnatal Breastfeeding Self-Efficacy Scale-Short Form. In this cross-sectional study, 236 women (mean age: 28.71, SD = 6.16) were surveyed. Results showed that depression was negatively associated with self-compassion (beta = -0.474, p < 0.001), and self-compassion was positively associated with breastfeeding self-efficacy (beta = 0.785, p < 0.001). Mediation analysis indicated that self-compassion partially mediated the link between PPD and breastfeeding self-efficacy, with a significant indirect effect (-0.586, -0.209). Depression also had a direct negative effect on breastfeeding self-efficacy (beta = -0.484, p < 0.001). These findings suggest that fostering self-compassion may enhance maternal mental health and breastfeeding outcomes.Article Citation - WoS: 4Citation - Scopus: 4Multiloop State-Dependent Nonlinear Time-Varying Sliding Mode Control of Unmanned Small-Scale Helicopter(Sage Publications Ltd, 2020) Ozcan, Sinan; Salamci, Metin U.; Nalbantoglu, VolkanTime delays, parameter uncertainties, and disturbances are the fundamental problems that hinder the stability and reduce dramatically the tracking performance of dynamical systems. In this paper, a new state-dependent nonlinear time-varying sliding mode control autopilot structure is proposed to cope with these dynamical and environmental complexities for an unmanned helicopter. The presented technique is based on freezing the nonlinear system equations on each time step and designing a controller using the frozen system model at this time step. The proposed method offers an improved performance in the presence of major disturbances and parameter uncertainties by adapting itself to possible dynamical varieties without a need of trimming the system on different operating conditions. Unlike the existing linear cascade autopilot structure, this study also proposes a nonlinear cascade state-dependent coefficient helicopter autopilot structure consisting of four separate nonlinear sub-systems. The proposed method is tested through the real time and PC-based simulations. To show the performance of the proposed robust method, it is also bench-marked against a linear sliding control control in PC-based simulations.Article Citation - WoS: 7Citation - Scopus: 7A New Strategy for Solving Store Separation Problems Using Openfoam(Sage Publications Ltd, 2022) Abuhanieh, Saleh; Akay, Hasan U.; Bicer, BarisThe ability of OpenFOAM to solve the problem of a store separating from an air vehicle (store separation problem) has been evaluated using a dynamic mesh (Overset/Chimera) technique for an industry-class (transonic and generic) benchmark test case. The major limitations of the standard libraries have been determined. To tackle these challenges, a new strategy has been proposed and implemented using only open-source libraries and tools. The strategy combines porting, modifying, and adapting an overset library from the OpenFOAM fork platform (foam-extend) to the standard OpenFOAM platform (ESI). Furthermore, in order to overcome the well-known weakness of the standard OpenFOAM compressible solvers, the newly adapted overset library was integrated with an open-source, density-based, and coupled solver (HiSA), which uses the OpenFOAM technology. Additionally, a force restrained model was developed to consider the externally applied forces on the store by the store ejectors. The accuracy of the developed strategy has been compared with wind tunnel tests and the solutions of two well-known commercial codes, showing good agreements with them. While the study has focused on simulations with inviscid Euler equations (typical of the test case considered here), the viscosity effect on the solution has also been studied with Navier-Stokes equations and compared with other results in the literature, showing minor differences. To the best of the authors' knowledge, this is the first work which studies and validates the store separation problem in transonic regime with OpenFOAM.
