249 results
Search Results
Now showing 1 - 10 of 249
Article Citation - WoS: 53Citation - Scopus: 54Forward and Reverse Bias Current-Voltage Characteristics of Au/N-si Schottky Barrier Diodes With and Without Sno2 Insulator Layer(Elsevier, 2011) Gokcen, M.; Altindal, S.; Karaman, M.; Aydemir, U.; Altndal, S.The effects of interfacial insulator layer, interface states (N-ss) and series resistance (R-s) on the electrical characteristics of Au/n-Si structures have been investigated using forward and reverse bias current-voltage (I-V) characteristics at room temperature. Therefore, Au/n-Si Schottky barrier diodes (SBDs) were fabricated as SBDs with and without insulator SnO2 layer to explain the effect of insulator layer on main electrical parameters. The values of ideality factor (n), R-s and barrier height (Phi(Bo)) were calculated from ln(I) vs. V plots and Cheung methods. The energy density distribution profile of the interface states was obtained from the forward bias I-V data by taking bias dependence of ideality factor, effective barrier height (Phi(e)) and R-s into account for MS and MIS SBDs. It was found that N-ss values increase from at about mid-gap energy of Si to bottom of conductance band edge of both SBDs and the MIS SBD's N-ss values are 5-10 times lower than those of MS SBD's. An apparent exponential increase from the mid-gap towards the bottom of conductance band is observed for both SBDs' (MS and MIS) interface states obtained without taking R-s into account. (C) 2011 Elsevier B.V. All rights reserved.Editorial Citation - WoS: 47Citation - Scopus: 47Emergency Changes in International Guidelines on Treatment for Head and Neck Cancer Patients During the Covid-19 Pandemic(Elsevier, 2020) Chaves, Aline Lauda Freitas; Castro, Ana Ferreira; Marta, Gustavo Nader; Junior, Gilberto Castro; Ferris, Robert L.; Giglio, Raul Eduardo; Kowalski, Luiz Paulo[No Abstract Available]Article Citation - WoS: 39Citation - Scopus: 44A Novel Treatment Strategy for Preterm Birth: Intra-Vaginal Progesterone-Loaded Fibrous Patches(Elsevier, 2020) Cam, Muhammet Emin; Hazar-Yavuz, Ayse Nur; Cesur, Sumeyye; Ozkan, Ozan; Alenezi, Hussain; Sasmazel, Hilal Turkoglu; Edirisinghe, Mohan; Turkoglu Sasmazel, HilalProgesterone-loaded poly(lactic) acid fibrous polymeric patches were produced using electrospinning and pressurized gyration for infra-vaginal application to prevent preterm birth. The patches were intravaginally inserted into rats in the final week of their pregnancy, equivalent to the third trimester of human pregnancy. Maintenance tocolysis with progesterone-loaded patches was elucidated by recording the contractile response of uterine smooth muscle to noradrenaline in pregnant rats. Both progesterone-loaded patches indicated similar results from release and thermal studies, however, patches obtained by electrospinning had smaller average diameters and more uniform dispersion compared to pressurized gyration. Patches obtained by pressurized gyration had better results in production yield and tensile strength than electrospinning; thereby pressurized gyration is better suited for scaled-up production. The patches did not affect cell attachment, viability, and proliferation on Vero cells negatively. Consequently, progesterone-loaded patches are a novel and successful treatment strategy for preventing preterm birth.Article Citation - WoS: 19Citation - Scopus: 19Metagenomic and Chemical Analysis of Tarhana During Traditional Fermentation Process(Elsevier, 2021) Soyucok, Ali; Yurt, Mediha Nur Zafer; Altunbas, Osman; Ozalp, Veli Cengiz; Sudagidan, Mert; Zafer Yurt, Mediha NurTarhana is one of the favourable traditional fermented food consumed as a soup. Different flour, vegetables, spices and yogurt are main constituents and they compose of microbiota of Tarhana. In this study, bacterial communities in each fermentation process and in their constituents were identified by metagenomic analysis. Also, chemical properties (pH, acidity, salt content and dry matter) were analysed in each step. The results showed that in the dough formation, mainly Lactobacillus, Bacillus, Enterococcus and Streptococcus were present and after Day 4, Clostridium and Bacillus became dominant, after drying Clostridium disappeared and in the final product bacterial communities from Bacillus and Streptococcus genus were observed. Chemical analysis showed that pH decreased from 4.94 to 4.46, acidity increased by time at the beginning of fermentation from 7.5% to 22.5% in first 6 days period, then, became stable at 14% in drying process. Salt content increased by time from 1.74 to 3.08 g salt/100 g Tarhana in first 8 days and in drying process salt content was recorded as 2.81-2.90 and dry matter was obtained as 94 g dry matter/100 g Tarhana in the final product. This study elucidated the effects of ingredients, raw materials and how microbiota and chemical properties changes during fermentation steps of home-made traditional Tarhana production and thus preparation methods could be developed to obtain standardized Tarhana products for industrial production in future.Article Citation - WoS: 19Citation - Scopus: 21Lyapunov Type Inequalities for Mixed Nonlinear Riemann-Liouville Fractional Differential Equations With a Forcing Term(Elsevier, 2017) Agarwal, Ravi P.; Ozbekler, AbdullahIn this paper, we present some new Lyapunov and Hartman type inequalities for Riemann-Liouville fractional differential equations of the form ((a)D(alpha)x)(t) + p(t) vertical bar x(t) vertical bar(mu-1) x(t) + q(t) vertical bar x(t) vertical bar(gamma-1) x(t) = f(t), where p, q, f are real-valued functions and 0 < gamma < 1 < mu < 2. No sign restrictions are imposed on the potential functions p, q and the forcing term f. The inequalities obtained generalize and compliment the existing results for the special cases of this equation in the literature. (C) 2016 Elsevier B.V. All rights reserved.Article Citation - WoS: 50Citation - Scopus: 53Recrystallization and Grain Growth Kinetics of In718 Manufactured by Laser Powder Bed Fusion(Elsevier, 2022) Dogu, Merve Nur; Davut, Kemal; Obeidi, Muhannad Ahmed; Yalcin, Mustafa Alp; Gu, Hengfeng; Low, Thaddeus Song En; Brabazon, DermotThe recrystallization and grain growth behaviour of IN718 alloy additively manufactured by laser powder bed fusion (L-PBF) is presented herein. The effects of three different temperatures (1050, 1150 and 1250 degrees C) and holding times (15, 45 and 90 min) were investigated. The texture evolution of the samples was recorded via electron backscatter diffraction (EBSD). The as-built sample is composed of bowl-shaped melt pools, a chessboard-like grain pattern and has a cube texture {100}<001>. Recrystallized grains were observed in the samples treated at 1150 degrees C for 15 min, as well as the samples treated for longer periods and at higher temperatures. Recrystallization was observed to start from high dislocation density regions, including the overlapping melt pools and the borders of the chessboard-like pattern. The initial cube texture transforms into a first-generation cube-twin texture {122}<212> via a twinning-assisted recrystallization mechanism. Then, those recrystallization nuclei sweep through the high defect density matrix; during which almost no new twins are formed. The samples treated at 1250 degrees C are almost completely recrystallized, which forms a weaker cube texture and a stronger P-orientation {011}<112>. However, the growth of recrystallized grains is very limited due to the presence of non-coherent precipitates. (C) 2022 The Author(s). Published by Elsevier B.V.Article Citation - WoS: 24Citation - Scopus: 27Effect of Solution Heat Treatment on the Microstructure and Crystallographic Texture of In939 Fabricated by Powder Bed Fusion-Laser Beam(Elsevier, 2023) Dogu, Merve Nur; Ozer, Seren; Yalcin, Mustafa Alp; Davut, Kemal; Bilgin, Guney Mert; Obeidi, Muhannad Ahmed; Brabazon, DermotThe effect of various solution heat treatment temperatures (i.e., 1120, 1160, 1200 and 1240 & DEG;C) on the microstructure, grain morphology and crystallographic texture of IN939 fabricated by powder bed fusion-laser beam (PBF-LB) was investigated. Microstructural analyses showed that the high-temperature gradient and rapid solidification of the PBF-LB processing caused different resulting microstructures compared to conventionally pro-duced counterparts. The melt pool morphologies and laser scanning paths were examined in the as-fabricated samples in the XZ-and XY-planes, respectively. After the application of solution heat treatment at 1120 & DEG;C, the as-fabricated PBF-LB initial microstructure was still apparent. For solution heat treatments of 1200 & DEG;C and above, the melt pool and scanning path morphologies disappeared and converted into a mixture of columnar grains in the XZ-plane and equiaxed grains in the XY-plane. On the other hand, large equiaxed grains were observed when the samples were solutionized at 1240 & DEG;C. Additionally, g' phase precipitated within the matrix after all solution heat treatment conditions, which led to increase in the microhardness values. According to electron backscatter diffraction (EBSD) analyses, both as-fabricated and solution heat-treated samples had intense texture with {001} plane normal parallel to the building direction. The first recrystallized grains began to appear when the samples were subjected to the solution heat treatment at 1160 & DEG;C and the fraction of the recrystallized grains increased with increasing temperature, as supported by kernel average misorientation (KAM) and grain spread orientation (GOS) analyses.& COPY; 2023 The Author(s). Published by Elsevier B.V. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).Article Citation - WoS: 5Citation - Scopus: 6Clinic-Oriented Injectable Smart Material for the Treatment of Diabetic Wounds: Coordinating the Release of Gm-Csf and Vegf(Elsevier, 2024) Kinali, Hurmet; Kalaycioglu, Gokce Dicle; Boyacioglu, Ozge; Korkusuz, Petek; Aydogan, Nihal; Vargel, IbrahimChronic wounds are often caused by diabetes and present a challenging clinical problem due to vascular problems leading to ischemia. This inhibits proper wound healing by delaying inflammatory responses and angiogenesis. To address this problem, we have developed injectable particle-loaded hydrogels which sequentially release Granulocyte-macrophage- colony-stimulating-factor (GM-CSF) and Vascular endothelial growth factor (VEGF) encapsulated in polycaprolactone-lecithin-geleol mono-diglyceride hybrid particles. GM-CSF promotes inflammation, while VEGF facilitates angiogenesis. The hybrid particles (200 -1000 nm) designed within the scope of the study can encapsulate the model proteins Bovine Serum Albumin 65 +/- 5 % and Lysozyme 77 +/- 10 % and can release stably for 21 days. In vivo tests and histological findings revealed that in the hydrogels containing GM-CSF/VEGF-loaded hybrid particles, wound depth decreased, inflammation phase increased, and fibrotic scar tissue decreased, while mature granulation tissue was formed on day 10. These findings confirm that the hybrid particles first initiate the inflammation phase by delivering GM-CSF, followed by VEGF, increasing the number of vascularization and thus increasing the healing rate of wounds. We emphasize the importance of multi-component and sequential release in wound healing and propose a unifying therapeutic strategy to sequentially deliver ligands targeting wound healing stages, which is very important in the treatment of the diabetic wounds.Article Citation - WoS: 28Citation - Scopus: 31A Model for the Prediction of Thermal Runaway in Lithium-Ion Batteries(Elsevier, 2024) Azuaje-Berbeci, Bernardo J.; Ertan, H. Bulent; Azuaje–Berbecí, Bernardo J.The increasing popularity of electric vehicles is driving research into lithium -ion batteries (LIBs). Thermal runaway (TR) in LIBs is a serious concern for the safe operation of these high-energy-density batteries that is yet to be overcome. A reliable model is needed to predict voltage variation, heat generation, temperature rise, and the process leading to TR of a LIB battery under its operating conditions (charging-discharging). Such a model can be used to design battery packs more resilient to thermal runaway or assess how a battery pack would perform under hazardous conditions. Furthermore, it can be used for generating a warning signal if there is a possibility of the battery going towards TR. This paper presents an approach to solving this problem, which is not currently well addressed in the literature. The approach adopted in this paper is based on a numerical analysis of a multilayered electrochemical-thermal model of LIB. Tuning the parameters of a LIB for accurate results from this numerical model is presented, as well as the details of the approach in the paper. Experiments are performed under several LIBs, and their voltage and surface temperature variations are measured under various operating conditions, including thermal runaway. The results of the experiments are compared with the predictions of the numerical simulations. An excellent agreement is observed with the experimental results, proving the accuracy of the proposed approach. This approach can be configured to give results in a few minutes. The paper also discusses how the developed approach can be used to create a TR warning during operating conditions or to change the mode of operation of a LIB before a hazard occurs.Article Catalyst-Free Synthesis of Thiourea-Linked Dumbbell-Shaped POSS for Ultrasensitive Determination of Prilocaine in Human Blood With Computational Insights(Elsevier, 2026) Bilge, Selva; Bayraktar, Ece Nur; Erkmen, Cem; Balci, Burcu; Abofoul, Anas; Ozkut, Merve Icli; Cihaner, AtillaAlthough various electrochemical sensors have been reported for the determination of local anesthetic drugs, most existing platforms suffer from limited sensitivity, insufficient surface stability, or inadequate electron-transfer efficiency, particularly when applied to complex biological matrices. Moreover, the potential of hybrid polyhedral oligomeric silsesquioxane (POSS)-based nanostructures combined with metal oxide nano-particles for improving electroanalytical performance has not yet been thoroughly explored. In this study, a high-sensitivity electrochemical nanosensor was developed for the determination of prilocaine (PC), an amide-type local anesthetic, using a glassy carbon (GC) electrode modified with POSS-titanium dioxide (TiO2) nano-particles (Nps). The combination of modifications provided a unique electrode surface by combining the high stability of POSS with the strong adsorption properties of TiO2 Nps, thereby increasing both surface loading and adsorption capacity. To elucidate the structure of the modification combination, 1H and 13C nuclear magnetic resonance (NMR) and Fourier transform infrared (FTIR) spectroscopic techniques, as well as Brunauer-Emmett-Teller (BET), X-Ray diffraction (XRD), Electrochemical impedance spectroscopy (EIS), and high-resolution transmission electron microscopy (HRTEM) analysis techniques were used, respectively. The analytical performance of the developed nanosensor was systematically optimized using differential pulse voltammetry (DPV), adsorptive stripping differential pulse voltammetry (AdSDPV), square wave voltammetry (SWV), and adsorptive stripping square wave voltammetry (AdSSWV) techniques. As a result of the optimization studies, the lowest limit of detection (LOD) was 3.66 x 10-8 M with the AdSSWV technique. DFT results corroborated the mechanism, indicating ring-centered electron donation (HOMO) and adsorption-favored N/O regions (MEP). Low LOD values were also recorded with other techniques, demonstrating the method's high sensitivity in analyte detection. In real sample analysis tests, PC recovery value in human blood samples was determined to be 98.69% using the AdSDPV technique. Despite the matrix effect, the nanosensor demonstrated high accuracy and reproducibility. The results indicate that the developed POSS-TiO2 Nps modified GC electrode sensor offers a high-performance, reliable, and good electrochemical detection platform suitable for use in biological and clinical applications.
