264 results
Search Results
Now showing 1 - 10 of 264
Article Citation - WoS: 22Citation - Scopus: 24Synthesis and Temperature-Tuned Band Gap Characteristics of Magnetron Sputtered Znte Thin Films(Elsevier, 2020) Isik, M.; Gullu, H. H.; Parlak, M.; Gasanly, N. M.Zinc telluride (ZnTe) is one of the attractive semiconducting compounds used in various optoelectronic devices. The usage of ZnTe in optoelectronic applications directs researchers to search its optical characteristics in great detail. For this purpose, structural and optical properties of magnetron sputtered ZnTe thin films were studied by means of x-ray diffraction and transmission spectroscopy measurements. Structural analyses indicated that ZnTe thin films having cubic crystalline structure were successfully grown on soda-lime glass substrates. Transmittance spectra in the 400-1000 nm were recorded in between 10 and 300 K temperature region. The analyses of absorption coefficient spectra resulted in band gap energies decreasing from around 2.31 (10 K) to 2.26 eV (300 K). Temperature dependency of gap energy was studied by Varshni and O'Donnell-Chen relations to determine various optical parameters like absolute zero temperature band gap energy, change of gap energy with temperature, phonon energy.Article Robust Divergence-Based Tests of Hypotheses for Simple Step-Stress Accelerated Life-Testing Under Gamma Lifetime Distributions(Elsevier, 2026) Balakrishnan, Narayanaswamy; Jaenada, Maria; Pardo, LeandroMany modern devices are highly reliable, with long lifetimes before their failure. Conducting reliability tests under actual use conditions may require therefore impractically long experimental times to gather sufficient data for developing accurate inference. To address this, Accelerated Life Tests (ALTs) are often used in industrial experiments to induce product degradation and eventual failure more quickly by increasing certain environmental stress factors. Data collected under such increased stress conditions are analyzed, and results are then extrapolated to normal operating conditions. These tests typically involve a small number of devices and so pose significant challenges, such as interval-censoring. As a result, the outcomes are particularly sensitive to outliers in the data. Additionally, a comprehensive analysis requires more than just point estimation; inferential methods such as confidence intervals and hypothesis testing are essential to fully assess the reliability behaviour of the product. This paper presents robust statistical methods based on minimum divergence estimators for analyzing ALT data of highly reliable devices under step-stress conditions and Gamma lifetime distributions. Robust test statistics generalizing the Rao test and divergence-based tests for testing linear null hypothesis are then developed. These hypotheses include in particular tests for the significance of the identified stress factors and for the validity of the assumption of exponential lifetimes.Article Citation - WoS: 4Citation - Scopus: 5Forecasting Turkish Local Elections(Elsevier, 2012) Toros, EmreThe literature on political forecasting is large, although the main focus of this literature is limited to a number of countries. Nevertheless, and despite the major differences between political systems, scientific forecasting work has proved to be broadly possible, with noteworthy extensions to new countries. This article extends the literature further by developing a new forecasting model for local elections in Turkey. The basic motivation of this article is to test the usefulness of political forecasting in the contexts of alternative democratic settings. Turkey, in that sense, seems to be an interesting case for a number of reasons. First, the Turkish Republic has been a multi-party democracy since the mid-1940s. Although it has been interrupted by three military coups, the party and election system in Turkey has brought real alternations in the government starting from very early years of the multi-party system. So, it is plausible to argue that Turkish voters have the tradition of evaluating the performances of political parties, as in any other Western-type democracy. That is to say, the dynamics of evaluations of political parties in Turkey follow a similar pattern to other contemporary democracies, being driven by economic and political forces. The main contribution of this analysis is the introduction of an explicit model, which can forecast the impact of economic and political variables across local elections in Turkey by using reliable, public, and macro-level data. In particular, this study offers a new forecasting model which tries to forecast the Justice and Development Party's (Adalet ve Kalkinma Partisi, AKP) vote share in 81 cities. (C) 2012 International Institute of Forecasters. Published by Elsevier B.V. All rights reserved.Article Citation - WoS: 37Citation - Scopus: 45Study on the Cytocompatibility, Mechanical and Antimicrobial Properties of 3d Printed Composite Scaffolds Based on Pva/ Gold Nanoparticles (aunp)/ Ampicillin (amp) for Bone Tissue Engineering(Elsevier, 2021) Topsakal, Aysenur; Midha, Swati; Yuca, Esra; Tukay, Ari; Sasmazel, Hilal Turkoglu; Kalaskar, Deepak M.; Gunduz, OguzhanOver the years, gold nanoparticles (AuNP) have been widely used in several biomedical applications related to the diagnosis, drug delivery, bio-imaging, photo-thermal therapy and regenerative medicine, owing to their unique features such as surface plasmon resonance, fluorescence and easy surface functionality. Recent studies showed that gold nanoparticles display positive effect on osteogenic differentiation. In line with this effect, 3-Dimesional (3D) scaffolds that can be used in bone tissue were produced by exploiting the properties of gold nanoparticles that increase biocompatibility and support bone tissue development. In addition, ampicillin was added to the scaffolds containing gold nanoparticles as a model drug to improve its antimicrobial properties. The scaffolds were produced as composites of polyvinyl alcohol (PVA) main matrix as PVA, PVA/AuNP, PVA/Ampicillin (AMP) and PVA/AuNP/AMP. Scanning Electron Microscopy (SEM) Fourier Transform Infrared Spectroscopy (FTIR), tensile measurement tests, and in vitro applications of 3D scaffolds were performed. As depicted by SEM, scaffolds were produced at pore sizes appropriate for bone tissue regeneration. According to FTIR results, there was no modification observed in the AMP, PVA and gold nanoparticles due to mixing in the resultant scaffolds. In vitro results show that 3D printed composite scaffold based on PVA/AuNP/AMP are biocompatible, osteo-inductive and exhibit antimicrobial properties, compared to PVA scaffolds. This study has implications for addressing infections during orthopedic surgeries. The PVA-based gold nanoparticle 3D tissue scaffold study containing ampicillin covers a new study compared to other articles based on gold nanoparticles.Article Citation - WoS: 113Citation - Scopus: 147Experiments and Finite Element Simulations on Micro-Milling of Ti-6al Alloy With Uncoated and Cbn Coated Micro-Tools(Elsevier, 2011) Oezel, T.; Thepsonthi, T.; Ulutan, D.; Kaftanoglu, B.This paper presents experimental investigations and finite element simulations on micro-milling of Ti-6Al-4V alloy with fine grain uncoated and cBN coated micro-end mills. Micro-milling of Ti-6Al-4V using uncoated and cBN coated tungsten carbide micro-end mills are conducted; surface roughness, burr formation and tool wear are measured. Effects of machining parameters on surface roughness, burr formation, and tool wear for uncoated and cBN coated micro-tools are investigated. Finite element modelling is utilized to predict forces, temperatures, and wear rate for uncoated and cBN coated micro-tools. Predicted temperature and tool wear contours for uncoated and cBN coated micro-tool edges reveal advantages of cBN coatings. Optimization studies on the experimental results are also conducted to identify the optimum process parameters which minimize both surface roughness and burr formation concurrently. (C) 2011 CIRP.Book Part Citation - Scopus: 2Molecular Mimicry Study Between Peptides of SARS-CoV-2 and Neutrophil Extracellular Traps-Related Proteins(Elsevier, 2024) Adiguzel,Y.; Shoenfeld,Y.Background Neutrophil extracellular traps (NETs) are observed in both COVID-19 pathology and autoimmune disorders, and molecular mimicry is a mechanism that can lead to an autoimmune response. Methods Similar sequences between SARS-CoV-2 proteins and 5 proteins (plasminogen receptor KT: PLRKT, myeloperoxidase: MPO, proteinase 3: PR-3, neutrophil elastase: NE, matrix metalloproteinase 9: MMP-9) that are present in NETs were searched. Human and SARS-CoV-2 sequence pairs were identified. Those among the identified sequence pairs, which are predicted as strong-binding peptides or epitopes of the same selected MHC class I and class II alleles, were predicted. Results In the case of MHC class I alleles, similar PLRKT and SARS-CoV-2 peptide sequences with high predicted-affinities to HLA-A*24:02, HLA-B*08:01, and HLA-B*15:01; similar MPO and SARS-CoV-2 peptide sequences with strong predicted-affinities to HLA-A*01:01, HLA-A*26:01, and HLA-B*15:01; and similar MMP-9 and SARS-CoV-2 peptide sequences with elevated predicted-affinities to HLA-B*39:01 were predicted. In the case of MHC class II alleles, similar PLRKT and SARS-CoV-2 peptide sequences with high predicted-affinities to HLA-DPA1*02:01/DPB1*01:01 were predicted. Conclusion This work is a proof-of-concept study, which revealed the potential involvement of molecular mimicry in NET pathology within susceptible individuals, in the case of being infected with SARS-CoV-2, leading to autoimmunity. © 2024 Elsevier B.V. All rights reserved.Article Citation - WoS: 25Citation - Scopus: 36Optimization and Thermal Analysis of Radial Ventilated Brake Disc To Enhance the Cooling Performance(Elsevier, 2022) Jafari, Rahim; Akyuz, RecepVentilated brake discs are preferable to automobile application because of their higher heat dissipation ability than solid discs. The shape, geometry and number of the cooling fins are interested parameters to be investigated to improve the cooling performance of the discs. In the present study, the optimum design of the brake disc with radial vanes is investigated numerically using the Taguchi design of experiments with taking into account nine design parameters. Finite element method is employed to simulate the detailed airflow and temperature distribution in the disc considering adjoined components as pads, rim, tire and dust shield. It has been found that the ventilation gap width has the highest impact on the brake disc cooling. The cooling time of the disc decreases 21% as the ventilation gap increases from 8 mm to 14 mm. In addition, it reduces about 10% with the increment of the channel width between two adjacent vanes (inverse of vane numbers from 43 to 30) and the twist point from 225 mm to 266 mm. In a decreasing order of importance, fin angle, inner and outer diameters of fin, dust shield, bell link and disc material affect the cooling performance of the ventilated disc.Article Citation - WoS: 20Citation - Scopus: 23A Novel Comfort Temperature Determination Model Based on Psychology of the Participants for Educational Buildings in a Temperate Climate Zone(Elsevier, 2023) Ozbey, Mehmet Furkan; Turhan, CihanMaintaining thermal comfort in the educational buildings is vital due to the impacts on learning effectiveness of students. Therefore, development of a proper comfort temperature in educational buildings is a must. In naturally ventilated and mixed-mode buildings, the adaptive thermal comfort model, which considers additively psychological, and behavioural factors to the Fanger's PMV/PPD model, is commonly applied based on regression analyses. However, the psychological adjustments based on current mood state are very limited in these adaptive thermal comfort models. Therefore, this study focuses on the psychological adjustments in terms of Profile of Mood States in order to predict comfort temperature of students in a case building. The experiments are conducted in a university on a temperate climate zone for a long period-data including both heating and cooling seasons. In this study, the comfort temperatures for each student are determined via Griffith method for the case building. Moreover, the current mood states of students are assessed utilizing the Profile of Mood States survey, which are collected via a developed mobile application. As a conclusion, the relation between the current mood state of the students and comfort temperature are statistically investigated. The results show that a Griffith constant are found as 0.332/K and mean annual comfort temperature is found as 21.32 degrees C in the case building. Additionally, a significant difference is found in the comfort temperatures among the students who have more, or fewer concerns than typically reported. The novelty of the study is to present a comfort temperature determination model which considers human psychology as a starter study in the literature.Article Citation - WoS: 30Citation - Scopus: 30New approach to stability of 2-D discrete systems with state saturation(Elsevier, 2012) Singh, VimalA new criterion for the global asymptotic stability of 2-D discrete systems described by the Roesser model using saturation arithmetic is presented. The criterion is a generalization over an earlier criterion due to Liu and Michel. The generalized criterion has the feature that Lyapunov matrix P is not restricted to be symmetric, i.e., P can be even unsymmetric. A modified form of the criterion is also presented. Two examples showing the effectiveness of the generalized approach to yield new 2-D stability results are provided. To the best of author's knowledge, the use of unsymmetric P to obtain new 2-D stability conditions (i.e., conditions which are outside the scope of symmetric P) is demonstrated, for first time, in this paper. (C) 2011 Elsevier B.V. All rights reserved.Article Citation - WoS: 23Citation - Scopus: 22Wavelength Dependence of the Nonlinear Absorption Performance and Optical Limiting in Bi12tio20 Single Crystal(Elsevier, 2023) Pepe, Yasemin; Isik, Mehmet; Karatay, Ahmet; Gasanly, Nizami; Elmali, AyhanIn this study, the influence of excitation wavelength and input intensity on the nonlinear absorption (NA) mechanism and optical limiting behavior of the Bi12TiO20 (BTO) single crystal were reported. The energy band gap of the BTO single crystal was obtained to be 2.38 eV. Urbach energy revealed that the single crystal has a highly defective structure. Open aperture (OA) Z-scan experiments were conducted at 532 and 1064 nm exci-tation wavelengths at various input intensities. Obtained experimental data were analyzed with a theoretical model considering one photon, two-photon and free carrier absorption contributions to NA. The obtained results revealed that the BTO single crystal possesses NA. The NA coefficient increased with increasing input intensity at 532 nm excitation wavelength, while it decreased with increasing input intensity at 1064 nm excitation wave-length. Due to the intense localized defect states distribution at the energy of 532 nm excitation wavelength within the band gap, increasing contribution to NA came from one photon absorption (OPA), sequential two -photon absorption (TPA) and free carrier absorption (FCA) with increasing input intensity. The filling of the defect states at 1064 excitation wavelength caused a reduction in NA due to increasing saturable absorption with increasing input intensity. TPA coefficients were also found from the fitting ignoring the defect states. As ex-pected, the values of the nonlinear absorption coefficient beta eff are higher than that of the TPA coefficients for both excitation wavelengths. The optical limiting threshold of the BTO single crystal was obtained to be 6.62 mJ/cm2. The results of the present works indicated that BTO single crystal can be used as a potential optical limiter.
