2 results
Search Results
Now showing 1 - 2 of 2
Article Citation - WoS: 61Citation - Scopus: 73Evaluation of Sulfonated Polysulfone/Zirconium Hydrogen Phosphate Composite Membranes for Direct Methanol Fuel Cells(Pergamon-elsevier Science Ltd, 2017) Ozden, Adnan; Ercelik, Mustafa; Devrim, Yilser; Colpan, C. Ozgur; Hamdullahpur, FeridunDirect methanol fuel cell (DMFC) technology has advanced perceivably, but technical challenges remain that must be overcome for further performance improvements. Thus, in this study, sulfonated polysulfone/zirconium hydrogen phosphate (SPSf/ZrP) composite membranes with various sulfonation degrees (20%, 35%, and 42%) and a constant concentration of ZrP (2.5%) were prepared to mitigate the technical challenges associated with the use of conventional Nafion (R) membranes in DMFCs. The composite membranes were investigated through Scanning Electron Microscopy (SEM), Electrochemical Impedance Spectroscopy (EIS), Thermogravimetric Analysis (TGA), oxidative stability and water uptake measurements, and single cell testing. Comparison was also made with Nafion (R) 115. Single cell tests were performed under various methanol concentrations and cell temperatures. Stability characteristics of the DMFCs under charging and discharging conditions were investigated via 1200 min short-term stability tests. The response characteristics of the DMFCs under dynamic conditions were determined at the start-up and shut-down stages. Composite membranes with sulfonation degrees of 35% and 42% were found to be highly promising due to their advanced characteristics with respect to proton conductivity, water uptake, thermal resistance, oxidative stability, and methanol suppression. For the whole range of parameters studied, the maximum power density obtained for SPSf/ZrP-42 (119 mW cm (2)) was found to be 13% higher than that obtained for Nafion (R) 115 (105 mW cm (2)). (C) 2017 Elsevier Ltd. All rights reserved.Article Citation - WoS: 41Citation - Scopus: 42Preparation of Polybenzimidazole/Zif-8 and Polybenzimidazole/Uio-66 Composite Membranes With Enhanced Proton Conductivity(Pergamon-elsevier Science Ltd, 2022) Eren, Enis Oguzhan; Ozkan, Necati; Devrim, YilserMetal-organic frameworks (MOFs) are considered emerging materials as they further improve the various properties of polymer membranes used in energy applications, ranging from electrochemical storage and purification of hydrogen to proton exchange membrane fuel cells. Herein, we fabricate composite membranes consisting of polybenzimidazole (PBI) polymer as a matrix and MOFs as filler. Synthesis of ZIF-8 and UiO-66 MOFs are conducted through a typical solvothermal method, and composite membranes are fabricated with different MOF compositions (e.g., 2.5, 5.0, 7.5, and 10.0 wt %). We report a significant improvement in proton conductivity compared with the pristine PBI; for example, more than a three-fold increase in conductivity is observed when the PBI-UiO66 (10.0 wt %) and PBI-ZIF8 (10.0 wt %) membranes are tested at 160 degrees C. Proton conductivities of the composite membranes vary between 0.225 and 0.316 S cm(-1) at 140 and 160 degrees C. For the comparison, pure PBI exhibits 0.060 S cm(-1) at 140 degrees C and 0.083 S cm(-1) at 160 degrees C. However, we also report a decrease in permeability and mechanical stability with the composite membranes. (C) 2021 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
