166 results
Search Results
Now showing 1 - 10 of 166
Conference Object Naturalness Analysis of the Speech Synthesized by a Tts Card(Ieee, 2016) Tora, Hakan; Uslu, BaranIt is known that the performance of a developed text-to-speech (TTS) synthesis system is assessed by subjective tests. These assessments are usually based on the intelligibility and naturalness of the synthesized speech. In this study, an investigation on relating these subjective test results, thus the naturalness of the synthesized speech, to which acoustic features is accomplished. Consequently the features which will increase the performance while synthesizing the speech are determined. Our work is focused especially on the pitch frequency and energy parameters.Conference Object Citation - WoS: 2Fem-Based Design Modifications and Efficiency Improvements of a Brushed Permanent Magnet Dc Motor(Ieee, 2017) Tarvirdilu-Asl, Rasul; Zeinali, Reza; Ertan, H. BulentThis paper describes design modifications of a brushed permanent magnet DC motor. Test motor is modeled using a Finite Element Method (FEM) based software. Model accuracy is investigated by comparing measurement and simulation results. Reducing material consumption in motor fabrication while the motor develops the desired torque at a higher efficiency is aimed in this paper. Modifications are done in three stages and simulations results are also presented. These results are also compared to simulation results of the test machine.Conference Object Citation - WoS: 2A Proposal on Requirements for Cosmic Fsm Automation From Source Code(Ieee, 2016) Tarhan, Ayca; Ozkan, Baris; Icoz, Gonca CananAutomation of functional size measurement (FSM) process has increasingly gained importance since manual measurement is time-consuming, costly, and sometimes error-prone. There exist studies that automate measurement from different software artifacts such as requirements specifications, design models, and software code. In this study we review and compare four studies that we have carried out in recent years to automate COSMIC FSM from software code. Based on the comparison and the lessons learned, we derive an operational scenario for automated FSM from software code and propose a set of requirements that need to be considered in automation. We think the proposal will be helpful not only for our future studies and also for future work of interested researchers.Conference Object Distance Laboratory Applications Errl(Ieee, 2008) Aydin, C. C.; Turkmen, G.; Ozyurt, E.; Aydin, E. U.; Cagiltay, N. E.; Ozbek, M. E.; Kara, A.In the last decade, the effect of internet usage in education is gradually increased. When we look from academic perspective, the new technologies provided alternatives for students learning. As distance education becomes important everyday, the indispensable elements of teaching and education, laboratories must be reachable via remote connection. Consequently, the education that is going to be given to the students will be more flexible with respect to place and time constraints and students can reach laboratory facilities at any time and anywhere not only in lectures and practical hours. In this study, European Remote Radio Laboratory (ERRL) which is a distance remote Radio Frequency (RF) laboratory designed for electrical-electronics students, is described generally. The software architecture, infrastructure and experiment that can be done with a remote connection have been described.Conference Object Citation - WoS: 14Examination of Ev-Grid Integration Using Real Driving and Transformer Loading Data(Ieee, 2015) Erden, Fatih; Kisacikoglu, Mithat C.; Gurec, Ozan H.The growing environmental concerns and the increase in oil prices will lead to the proliferation of electric vehicles (EVs) in the near future. The increase in the number of EVs, while providing green and inexpensive solutions to transportation needs, may cause constraints on the operation of the utility grid that should be investigated. In this paper, the real user driving information is collected from individual data tracking devices of passenger vehicle owners instead of assuming randomly distributed trip characteristics. The collected trip data are first analyzed to generate a statistical model of the trip characteristics in terms of home arrival times and state of charge (SOC) levels. The resulting model is then used to simulate and analyze the impact of EV integration in a real grid with different EV penetration levels. For this, real distribution transformer data provided by Baskent Electric Distribution Co. is used. The proposed method produces more realistic results in comparison to the studies assuming random scenarios.Conference Object Citation - WoS: 6Simulation-Based Environments for Surgical Practice(Ieee, 2017) Dalveren, Gonca Gokce Menekse; Cagiltay, Nergiz Ercil; Ozcelik, Erol; Maras, HakanModeling and simulation environments provide several insights about the real situations such as endoscopic surgery. Endoscopic surgery requires both hand skills, so, understanding the effect of using dominant or non dominant hand on mental workload is important to better design, develop and implement modeling and simulation environments to support real-life implementations of surgical procedures. This experimental study presents a simulation application of eye-tracking approach to understand mental workload in different hand conditions: dominant hand, non-dominant hand and both hand. The results of the study show that, performing simulated surgical tasks by both hands compared to dominant hand, increases mental workload which is evident by higher pupil size. Accordingly, to manage the mental-load problems of surgeons while performing complex tasks that require both hand usage simulation-based environments can be used. Consequently, collection of detailed information such as eye-data, can give several insights about the behaviors of the surgeons. Also, their required skills can be improved by development of simulation and training environments.Conference Object A Fast Hough Transform Approximation and Its Application for Barcode Localization(Ieee, 2007) Safran, Mehmet Ilhami; Oektem, RusenThis paper addresses barcode localization in images acquired by wireles cameras. For this purpose, a fast Hough transform approximation by use of a sliding mask is developed. The approximation decomposes the lines at different orientations into distinct bitplanes. Barcode localization is achieved by considering the high density locations in the bitplanes via morphology and profiling. The time complexity of the proposed approximation is lower than the previously proposed fast Hough transform, though it achieves the equal performance in localization of barcodes.Conference Object Citation - WoS: 2Magnetically Geared Direct Drive Wind Generator Thermal Analysis(Ieee, 2017) Zeinali, Reza; Ertan, H. Bulent; Yamali, Cemil; Tarvirdilu-Asl, RasulThis paper considers Dual Stator Spoke Array Vernier Permanent Magnet (DSSA-VPM) generator for the direct drive wind-electric energy conversion. The structure of the generator is described. Although how this design is optimized is not discussed, dimensions of the designed generator are given. In electrical machine design thermal performance is naturally of utmost importance. In this paper thermal performance of the design and how its temperature can be kept within the temperature limit imposed by its insulation class and the permanent magnets used is investigated. It is found that when air flow within the generator is not permitted, at rated load condition the generator temperature reaches very high levels. To lower the operating temperature, ventilation holes are introduced to the end plates of the frame. Also some blades are placed on the rotor to help flow of air over the end windings. A model is introduced to calculate the air speed in the region where air flows. Using the calculated air speed a new heat transfer coefficient is determined for the region where air flows. It is found out that with the mentioned modifications to the structure of the generator the designed generator temperature rise can be kept within the value permitted for its insulation class. Therefore, the power density of the design can be safely compared with the power density of other types of designs for direct drive turbines. It is found that DSSA-VPM generator topology offers a clear advantage over other types of generators considered in the literature.Conference Object The Usability Study for the Personal Health Record Systems(Ieee, 2015) Gokay, Gonca; Ercil, Yavuz; Tokdemir, Gul; Cagiltay, Nergiz; Aykac, Y. EvrenWith the emergence of new technologies, there is an increasing number of studies to improve healthcare delivery quality and health services. The studies have shown that the focus should be on integrated, sharable and personalized healthcare solutions which requires usage of patient data as much as possible for fast and correct diagnosis and care. Hence, data related to people when they are healthy and when they are sick become very critical for which many projects have been initiated to increase awareness of people about the importance of data collection all over the world and in our country as well. This requires more active role of the citizens in tracking their healthcare data. In this study, Microsoft Health Vault system that is used for storage of personal health records, has been analyzed in terms of its usability characteristics and the results have been discussed.Conference Object Design, Analysis and Manufacturing of Dielectric Rod Added Conical Rom Antennas(Ieee, 2016) Avcioglu, Esra; Özaslan, Alper; Caliskan, FatmaIn this study, ANSYS HFSS (High Frequency Structural Simulator) software had been used. By using this software, dielectric rod added conical horn antennas with various shapes and dimensions had been designed and analyzed. 5 (five) distinct antennas designed and their gains and return losses had been observed to evaluate the effects of the changes. From the results of these comparisons, the proper antenna type was selected and it was manufactured.
