3 results
Search Results
Now showing 1 - 3 of 3
Article Citation - WoS: 61Citation - Scopus: 73Evaluation of Sulfonated Polysulfone/Zirconium Hydrogen Phosphate Composite Membranes for Direct Methanol Fuel Cells(Pergamon-elsevier Science Ltd, 2017) Ozden, Adnan; Ercelik, Mustafa; Devrim, Yilser; Colpan, C. Ozgur; Hamdullahpur, FeridunDirect methanol fuel cell (DMFC) technology has advanced perceivably, but technical challenges remain that must be overcome for further performance improvements. Thus, in this study, sulfonated polysulfone/zirconium hydrogen phosphate (SPSf/ZrP) composite membranes with various sulfonation degrees (20%, 35%, and 42%) and a constant concentration of ZrP (2.5%) were prepared to mitigate the technical challenges associated with the use of conventional Nafion (R) membranes in DMFCs. The composite membranes were investigated through Scanning Electron Microscopy (SEM), Electrochemical Impedance Spectroscopy (EIS), Thermogravimetric Analysis (TGA), oxidative stability and water uptake measurements, and single cell testing. Comparison was also made with Nafion (R) 115. Single cell tests were performed under various methanol concentrations and cell temperatures. Stability characteristics of the DMFCs under charging and discharging conditions were investigated via 1200 min short-term stability tests. The response characteristics of the DMFCs under dynamic conditions were determined at the start-up and shut-down stages. Composite membranes with sulfonation degrees of 35% and 42% were found to be highly promising due to their advanced characteristics with respect to proton conductivity, water uptake, thermal resistance, oxidative stability, and methanol suppression. For the whole range of parameters studied, the maximum power density obtained for SPSf/ZrP-42 (119 mW cm (2)) was found to be 13% higher than that obtained for Nafion (R) 115 (105 mW cm (2)). (C) 2017 Elsevier Ltd. All rights reserved.Article Citation - Scopus: 38Assessment of Polybenzimidazole/Mof Composite Membranes for the Improvement of High-Temperature Pem Fuel Cell Performance(Elsevier Ltd, 2024) Devrim,Y.; Colpan,C.O.This study aims to determine the most effective utilization of ZIF-8 type metal-organic framework (MOF) doped polybenzimidazole (PBI) composite membrane in high-temperature polymer electrolyte membrane fuel cells (HT-PEMFC) and investigate how ZIF-8 filler affects performance. ZIF-8 particles were prepared by solvothermal method and added to the PBI polymer using a weight percentage varying from 1 to 5 %. XRD, BET, and TEM examined the prepared ZIF-8. Composite membrane properties were investigated by XRD, SEM analysis, proton conductivity measurements, acid doping, and acid stripping tests. The HT-PEMFC performances of the membranes were carried out using Hydrogen and dry air at 150–180. The highest performance was acquired with the composite ZIF8/PBI-2 membrane as 0.432 W/cm2 at 170 °C. The obtained result is explained by easier proton transfer over ZIF-8's enlarged tunnel network. This study proposes a promising strategy to use ZIF-8 to prepare a PBI composite membrane with excellent proton conductivity, acid doping, and low acid leaching for HT-PEMFC application. The current study's findings can support future research on PBI/MOF-based composite membranes for HT-PEMFC applications. © 2024 Hydrogen Energy Publications LLCArticle Citation - WoS: 41Citation - Scopus: 42Preparation of Polybenzimidazole/Zif-8 and Polybenzimidazole/Uio-66 Composite Membranes With Enhanced Proton Conductivity(Pergamon-elsevier Science Ltd, 2022) Eren, Enis Oguzhan; Ozkan, Necati; Devrim, YilserMetal-organic frameworks (MOFs) are considered emerging materials as they further improve the various properties of polymer membranes used in energy applications, ranging from electrochemical storage and purification of hydrogen to proton exchange membrane fuel cells. Herein, we fabricate composite membranes consisting of polybenzimidazole (PBI) polymer as a matrix and MOFs as filler. Synthesis of ZIF-8 and UiO-66 MOFs are conducted through a typical solvothermal method, and composite membranes are fabricated with different MOF compositions (e.g., 2.5, 5.0, 7.5, and 10.0 wt %). We report a significant improvement in proton conductivity compared with the pristine PBI; for example, more than a three-fold increase in conductivity is observed when the PBI-UiO66 (10.0 wt %) and PBI-ZIF8 (10.0 wt %) membranes are tested at 160 degrees C. Proton conductivities of the composite membranes vary between 0.225 and 0.316 S cm(-1) at 140 and 160 degrees C. For the comparison, pure PBI exhibits 0.060 S cm(-1) at 140 degrees C and 0.083 S cm(-1) at 160 degrees C. However, we also report a decrease in permeability and mechanical stability with the composite membranes. (C) 2021 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
