151 results
Search Results
Now showing 1 - 10 of 151
Article Citation - WoS: 45Citation - Scopus: 45An Ambipolar Low Band Gap Material Based on Bodipy and Edot(Elsevier Science Bv, 2009) Algi, Fatih; Cihaner, AtillaA novel donor-acceptor type conducting polymer based on BODIPY dye as acceptor and EDOT units as donor parts is synthesized electrochemically. The unique combination of BODIPY and EDOT units provides an ambipolar (n- and p-doping processes) low band gap material (4). This is the first example of p-n junction in an organic pi-conjugated material where BODIPY unit is incorporated directly in the main chain. Furthermore, the polymer film exhibits electrochromic behavior upon p-doping: a color change from light violet (neutral) to indigo (oxidized). (C) 2009 Elsevier B.V. All rights reserved.Article Citation - WoS: 80Citation - Scopus: 85Methylene Blue Photocatalytic Degradation Under Visible Light Irradiation on Copper Phthalocyanine-Sensitized Tio2 Nanopowders(Elsevier Science Bv, 2017) Cabir, Beyza; Yurderi, Mehmet; Caner, Nurdan; Agirtas, Mehmet Salih; Zahmakiran, Mehmet; Kaya, MuratDescribed herein is a new photocatalytic material that shows remarkable catalytic performance in terms of activity and reusability in the photocatalytic degradation of methylene blue (MB) in water. The new catalyst system comprised of copper phthalocyanine modified titanium(IV) oxide (TiO2) nanopowders (CuPc-TiO2\) was prepared by the wet chemical impregnation method to improve the photocatalytic activity of TiO2 and characterized by the combination of various spectroscopic tools including ICP-OES, P-XRD, DR/UV-Vis, FTIR, FE-SEM, SEM-EDX, BFTEM, HRTEM and N-2-adsorption-desorption techniques. The photocatalytic performance of the resulting CuPc-TiO2 in terms of activity and stability was evaluated by the photocatalytic degradation of MB in aqueous solution under mild conditions. Our results revealed that CuPc-TiO2 photocatalyst displayed remarkable activity (TOF = 3.73 mol MB/(mol CuPc + mol TiO2) x h) in the complete (100%) photocatalytic degradation of MB under visible light irradiation (150 W). Moreover, CuPc-TiO2 photocatalyst showed excellent stability against to sintering and clumping throughout the reusability experiments and it retained >80% of its initial activity even at 5th reuse, which makes it reusable photocatalyst in the photocatalytic degradation of MB. (C) 2017 Elsevier B.V. All rights reserved.Article Citation - WoS: 11Citation - Scopus: 13Geometric Distribution of Order k With a Reward(Elsevier Science Bv, 2014) Eryilmaz, SerkanIn this paper, we introduce and study geometric distribution of order k with a reward. In a sequence of binary trials, suppose that each time a success occurs a random reward is received. The distribution of the number of trials until the sum of consecutive rewards is equal to or exceeds the level k is called geometric distribution of order k with a reward. We obtain expressions for the probability mass function of this distribution. (C) 2014 Elsevier B.V. All rights reserved.Article Citation - WoS: 21Citation - Scopus: 24Chaotic Dynamics of Resistively Coupled Dc-Driven Distinct Josephson Junctions and the Effects of Circuit Parameters(Elsevier Science Bv, 2009) Kurt, Erol; Canturk, MehmetTwo distinct Josephson junctions (JJs) connected with a constant coupling resistance R(cp) are theoretically considered to investigate the overall dynamics below and above the critical current I(c). The circuit model of the device is driven by two DC current sources, I(1) and I(2). Each junction is characterized by a nonlinear resistive-capacitive junction (NRCSJ). Having constructed the circuit model, time-dependent simulations are carried out for a variety of control parameter sets. Common techniques such as bifurcation diagrams, two-dimensional attractors and Lyapunov exponents are applied for the determination of chaotic as well as periodic dynamics of the superconducting junction devices. According to the findings, two states (namely superconducting and ordinary conducting) are determined as functions of the source currents. The chaotic current which flows through Rcp exhibits a very rich behavior depending on the source currents I(1) and I(2) and junction capacitances C(1) and C(2). The device characteristics are summarized by a number of three-dimensional phase diagrams in the parameter space. In addition, for certain parameters, hyper-chaotic cases with two positive Lyapunov exponents are encountered. In contrast to earlier studies claiming the need for a sinusoidal feeding current for generating a chaotic signal, our circuitry can easily generate one via a DC source. (C) 2009 Elsevier B.V. All rights reserved.Article Citation - WoS: 3Citation - Scopus: 3q-stieltjes Classes for Some Families of q-densities(Elsevier Science Bv, 2019) Ostrovska, Sofiya; Turan, MehmetThe Stieltjes classes play a significant role in the moment problem allowing to exhibit explicitly infinite families of probability densities with the same sequence of moments. In this paper, the notion of q-moment determinacy/indeterminacy is proposed and some conditions for a distribution to be either q-moment determinate or indeterminate in terms of its q-density have been obtained. Also, a q-analogue of Stieltjes classes is defined for q-distributions and q-Stieltjes classes have been constructed for a family of q-densities of q-moment indeterminate distributions. (C) 2018 Elsevier B.V. All rights reserved.Article Citation - WoS: 20Citation - Scopus: 26Simplified software inspection process in compliance with international standards(Elsevier Science Bv, 2009) Mishra, Deepti; Mishra, AlokA significant amount of software is developed all over the world by small and medium size software organizations. These organizations do not have enough infrastructures and resources to implement an austere quality plan. Software inspection is a fundamental component of the software quality assurance process. Formal review methods are rigorous and their implementation is cumbersome for small and medium enterprises. In this paper, we have presented a new simplified inspection process which is easy to implement. requires fewer resource and almost no documentation. Also, people who are conducting this inspection need not be present at the same place during most stages of the inspection process. We have also compared this process with IEEE and NASA standards for software inspection and found that it meets almost 99% of both standards. While there has been much research on inspection, little attention is paid towards compliance with international standards. These results could be used as a basis for further research in software inspection and process towards aligning with international standards. This process has been successfully implemented in a CMM level 3 software development organization which is striving to accomplish higher maturity levels to establish at the international level. (C) 2008 Elsevier B.V. All rights reserved.Conference Object Citation - Scopus: 2Mba Students' Preference On: Online, Formal and Hybrid Mba Programs(Elsevier Science Bv, 2011) Rouyendegh, Babak Daneshvar; Erkan, Turan ErmanIn recent years, there has been a rapid rise in student enrolments in both online and formal MBA programs. This study is based on the results of a case study in which over 30 students enrolled in a top-ranked online and formal MBA program. Thus, the Fuzzy Analytic Hierarchy Process (FAHP) has been used for choosing the program. Due to the inability of AHP to deal with the impression and subjectiveness in the pair-wise comparison process, the FAHP has been used. The result of the research is interesting since neither an online nor a formal education program is preferred; a hybrid one has been developed. (C) 2011 Published by Elsevier Ltd.Article Citation - WoS: 24Citation - Scopus: 28Enhancing Proton Conductivity Via Sub-Micron Structures in Proton Conducting Membranes Originating From Sulfonated Pvdf Powder by Radiation-Induced Grafting(Elsevier Science Bv, 2018) Sadeghi, Sahl; Sanli, Lale Isikel; Guler, Enver; Gursel, Selmiye Alkan; Işıkel Şanlı, Lale; Alkan Gürsel, SelmiyeWe report here submicron-structured proton conducting poly(vinylidene fluoride)-graft-poly(styrene sulfonic acid) (PVDF-g-PSSA) membranes for polymer electrolyte membrane fuel cells (PEMFC). Highly conductive proton exchange membranes were obtained by single-step radiation grafting of sodium styrene sulfonate (SSS) to powder-form PVDF, followed by casting and subsequent solvent evaporation. The obtained submicron structure of membrane through solvent evaporation led to the arrangement of ionic channels proving increasing proton conductivity with the increase in graft level. In addition, a temperature above melting point of PVDF was used for solvent evaporation to allow melted PVDF to fill the formed pores, providing denser structure resulting in improved mechanical properties of the membranes. SSS grafting to PVDF powder was verified by NMR spectroscopy, and resultant membranes were characterized for proton conductivity, water up-take, morphology, mechanical and thermal properties, and fuel cell performance. According to preliminary tests, proton conductivities which were observed to increase with graft level were found to be around 70 mS cm(2) at 35% graft level. Thus, this led to a promising power density of 250 mW/cm(2) at 650 mA/cm(2).Conference Object Citation - WoS: 10Citation - Scopus: 11Improving the Laser Damage Resistance of Oxide Thin Films and Multilayers Via Tailoring Ion Beam Sputtering Parameters(Elsevier Science Bv, 2015) Cosar, M. B.; Coşar, Batuhan Mustafa; Ozhan, A. E. S.; Aydogdu, G. H.; Coşar, Batuhan Mustafa; Computer Engineering; Computer EngineeringIon beam sputtering is one of the widely used methods for manufacturing laser optical components due to its advantages such as uniformity, reproducibility, suitability for multilayer coatings and growth of dielectric materials with high packing densities. In this study, single Ta2O5 layers and Ta2O5/SiO2 heterostructures were deposited on optical quality glass substrates by dual ion beam sputtering. We focused on the effect of deposition conditions like substrate cleaning, assistance by 12 cm diameter ion beam source and oxygen partial pressure on the laser-induced damage threshold of Ta2O5 single layers. After-wards, the obtained information is employed to a sample design and produces a Ta2O5/SiO2 multilayer structure demonstrating low laser-induced damage without a post treatment procedure. (C) 2014 Elsevier B.V. All rights reserved.Conference Object Citation - WoS: 9Lobatto IIIA-IIIB discretization of the strongly coupled nonlinear Schrodinger equation(Elsevier Science Bv, 2011) Aydin, A.; Karasozen, B.In this paper, we construct a second order semi-explicit multi-symplectic integrator for the strongly coupled nonlinear Schrodinger equation based on the two-stage Lobatto IIIA-IIIB partitioned Runge-Kutta method. Numerical results for different solitary wave solutions including elastic and inelastic collisions, fusion of two solitons and with periodic solutions confirm the excellent long time behavior of the multi-symplectic integrator by preserving global energy, momentum and mass. (C) 2010 Elsevier B.V. All rights reserved.
