775 results
Search Results
Now showing 1 - 10 of 775
Article Citation - WoS: 9Citation - Scopus: 9Mixture Representations for Three-State Systems With Three-State Components(Ieee-inst Electrical Electronics Engineers inc, 2015) Eryilmaz, SerkanThis paper is concerned with dynamic reliability modeling of three-state systems consisting of three-state s-independent components. The components and the systems are assumed to be in three states: perfect functioning, partial performance, and complete failure. Survival functions of such systems are studied in different state subsets. It is shown that the survival function of a three-state system with a general structure can be represented as a mixture of the survival functions of the three-state k-out-of-n:G systems. The results are illustrated for the three-state consecutive-k-out-of-n:G systems whose components degrade according to a Markov process.Article Citation - WoS: 47Citation - Scopus: 52Biocompatible Electroactive Tetra(aniline)-Conjugated Peptide Nanofibers for Neural Differentiation(Amer Chemical Soc, 2018) Arioz, Idil; Erol, Ozlem; Bakan, Gokhan; Dikecoglu, F. Begum; Topal, Ahmet E.; Urel, Mustafa; Guler, Mustafa O.Peripheral nerve injuries cause devastating problems for the quality of patients' lives, and regeneration following damage to the peripheral nervous system is limited depending on the degree of the damage. Use of nanobiomaterials can provide therapeutic approaches for the treatment of peripheral nerve injuries. Electroactive biomaterials, in particular, can provide a promising cure for the regeneration of nerve defects. Here, a supramolecular electroactive nanosystem with tetra(aniline) (TA)-containing peptide nanofibers was developed and utilized for nerve regeneration. Self-assembled TA conjugated peptide nanofibers demonstrated electroactive behavior. The electroactive self-assembled peptide nanofibers formed a well-defined three-dimensional nanofiber network mimicking the extracellular matrix of the neuronal cells. Neurite outgrowth was improved on the electroactive TA nanofiber gels. The neural differentiation of PC-12 cells was more advanced on electroactive peptide nanofiber gels, and these biomaterials are promising for further use in therapeutic neural regeneration applications.Article Citation - WoS: 12Citation - Scopus: 14Numerical Modeling of Visco-Elasto Hygro-Thermal Stresses and the Effects of Operating Conditions on the Mechanical Degradation of Pefc Membranes(Elsevier, 2018) Mehrtash, Mehdi; Tari, Ilker; Yesilyurt, SerhatDurability of membranes is one of the concerns for widespread commercialization of polymer electrolyte fuel cells. Effects of membrane swelling on the durability pose important challenges for the fabrication of the catalyst-coated membrane. This study provides insight into vulnerable locations of the membrane under hygrothermal loading, mechanical loading due to clamping and realistic conditions where a combination of both of these loadings are imposed. With a half rib-channel model, we simulate a polymer electrolyte fuel cell that operates under varying loads and clamping pressure. Model considers anisotropic diffusion in the gas diffusion layer as well as complex interactions of water transport dynamics between gas diffusion layers and the membrane. Mechanical responses of the membrane subject to conjugate hygro-thermo-mechanical loadings during typical scenarios of fuel cell operation reveal the effects of operating parameters as well as individual contributing factors on the development of local stresses in the membrane.Review Citation - WoS: 152Citation - Scopus: 194Challenges and Best Practices in Industry-Academia Collaborations in Software Engineering: a Systematic Literature Review(Elsevier, 2016) Garousi, Vahid; Petersen, Kai; Ozkan, BarisContext: The global software industry and the software engineering (SE) academia are two large communities. However, unfortunately, the level of joint industry-academia collaborations in SE is still relatively very low, compared to the amount of activity in each of the two communities. It seems that the two 'camps' show only limited interest/motivation to collaborate with one other. Many researchers and practitioners have written about the challenges, success patterns (what to do, i.e., how to collaborate) and anti-patterns (what not do do) for industry-academia collaborations. Objective: To identify (a) the challenges to avoid risks to the collaboration by being aware of the challenges, (b) the best practices to provide an inventory of practices (patterns) allowing for an informed choice of practices to use when planning and conducting collaborative projects. Method: A systematic review has been conducted. Synthesis has been done using grounded-theory based coding procedures. Results: Through thematic analysis we identified 10 challenge themes and 17 best practice themes. A key outcome was the inventory of best practices, the most common ones recommended in different contexts were to hold regular workshops and seminars with industry, assure continuous learning from industry and academic sides, ensure management engagement, the need for a champion, basing research on real world problems, showing explicit benefits to the industry partner, be agile during the collaboration, and the co-location of the researcher on the industry side. Conclusion: Given the importance of industry-academia collaboration to conduct research of high practical relevance we provide a synthesis of challenges and best practices, which can be used by researchers and practitioners to make informed decisions on how to structure their collaborations. (C) 2016 Elsevier B.V. All rights reserved.Article Citation - WoS: 28Citation - Scopus: 28Polycrystalline Diamond End Mill Cutting Edge Design To Improve Ductile-Mode Machining of Silicon(Elsevier Science inc, 2018) Oliaei, S. N. B.; Karpat, Y.Silicon is a commonly used material in optoelectronics and micro fluidics devices. Micro mechanical milling of silicon with polycrystalline diamond (PCD) tools has the potential to produce three-dimensional surfaces with good surface finish and an increased material removal rate. PCD micro end mill geometry is known to influence process outputs yet its effect has not been studied in detail. In this study, a PCD end mill with a hexagonal geometry has been considered, and its micro cutting geometry has been modified to have a parallelogram shape featuring a large negative rake angle on the bottom of the tool. The proposed micro geometry also reduces the contact area between the tool and the work material. The proposed geometry was fabricated using wire electric discharge machining (WEDM). Ductile-to-brittle transition conditions and areal surface roughness have been investigated as a function of tool geometry and feed during micro milling of silicon. A significant improvement in material removal rate and surface roughness has been obtained compared to a commercially available PCD end mill having hexagonal geometry with flat bottom. The results show that PCD micro end mill geometry significantly affects the process outputs.Article Citation - WoS: 56Citation - Scopus: 64Development of 500 W Pem Fuel Cell Stack for Portable Power Generators(Pergamon-elsevier Science Ltd, 2015) Devrim, Yilser; Devrim, Huseyin; Eroglu, InciPolymer Electrolyte Membrane Fuel Cell (PEMFC) portable power generators are gaining importance in emergency applications. In this study, an air-cooled PEMFC stack was designed and fabricated for net 500 W power output. Gas Diffusion Electrodes (GDE's) were manufactured by ultrasonic spray coating technique. Stack design was based on electrochemical data obtained at 0.60 V was 0.5 A/cm(2) from performance tests of a single cell having the same membrane electrode assemblies (MEA) that had an active area of 100 cm(2). Graphite bipolar plates were designed and machined by serpentines type flow. The stack comprising of 24 cells was assembled with external fixing plates. The stack temperature was effectively regulated by the cooling fan based on on-off control system. A maximum power of 647 W was obtained from the stack. The PEMFC stack was stable during start-up and shutdown cycling testing for 7 days at 65 degrees C in H-2/air at a constant cell voltage. Copyright (c) 2015, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.Article Citation - WoS: 9Citation - Scopus: 9The Approximation of Logarithmic Function by q-bernstein Polynomials in the Case q > 1(Springer, 2007) Ostrovska, SofiyaSince in the case q > 1, q-Bernstein polynomials are not positive linear operators on C[ 0, 1], the study of their approximation properties is essentially more difficult than that for 0 < q < 1. Despite the intensive research conducted in the area lately, the problem of describing the class of functions in C[ 0, 1] uniformly approximated by their q-Bernstein polynomials ( q > 1) remains open. It is known that the approximation occurs for functions admitting an analytic continuation into a disc {z : | z| < R}, R > 1. For functions without such an assumption, no general results on approximation are available. In this paper, it is shown that the function f ( x) = ln( x + a), a > 0, is uniformly approximated by its q-Bernstein polynomials ( q > 1) on the interval [ 0, 1] if and only if a >= 1.Article Citation - WoS: 1Citation - Scopus: 1Novel Frequency-Domain Criterion for Elimination of Limit Cycles in a Class of Digital Filters With Single Saturation Nonlinearity(Pergamon-elsevier Science Ltd, 2008) Singh, VimalA frequency-domain criterion for the elimination of limit cycles in a class of digital filters utilizing single saturation nonlinearity is presented. The criterion is derived by exploiting the structural properties of the system under consideration in a greater detail. A novel feature of the criterion is that it takes the form of a matrix inequality, despite the fact that there is single nonlinearity in the system. An example showing the effectiveness of the criterion is given. (c) 2006 Elsevier Ltd. All rights reserved.Article Citation - WoS: 4Citation - Scopus: 5Forecasting Turkish Local Elections(Elsevier, 2012) Toros, EmreThe literature on political forecasting is large, although the main focus of this literature is limited to a number of countries. Nevertheless, and despite the major differences between political systems, scientific forecasting work has proved to be broadly possible, with noteworthy extensions to new countries. This article extends the literature further by developing a new forecasting model for local elections in Turkey. The basic motivation of this article is to test the usefulness of political forecasting in the contexts of alternative democratic settings. Turkey, in that sense, seems to be an interesting case for a number of reasons. First, the Turkish Republic has been a multi-party democracy since the mid-1940s. Although it has been interrupted by three military coups, the party and election system in Turkey has brought real alternations in the government starting from very early years of the multi-party system. So, it is plausible to argue that Turkish voters have the tradition of evaluating the performances of political parties, as in any other Western-type democracy. That is to say, the dynamics of evaluations of political parties in Turkey follow a similar pattern to other contemporary democracies, being driven by economic and political forces. The main contribution of this analysis is the introduction of an explicit model, which can forecast the impact of economic and political variables across local elections in Turkey by using reliable, public, and macro-level data. In particular, this study offers a new forecasting model which tries to forecast the Justice and Development Party's (Adalet ve Kalkinma Partisi, AKP) vote share in 81 cities. (C) 2012 International Institute of Forecasters. Published by Elsevier B.V. All rights reserved.Article Citation - WoS: 38Citation - Scopus: 48Fixed Points of Modified f-contractive Mappings in Complete Metric-Like Spaces(Hindawi Ltd, 2015) Alsulami, Hamed H.; Karapinar, Erdal; Piri, HosseinWe introduce the notion of modified F-contractive mappings in the setting of complete metric-like spaces and we investigate the existence and uniqueness of fixed point of such mappings. The presented results unify, extend, and improve several results in the related literature.
