Search Results

Now showing 1 - 10 of 12
  • Letter
    Citation - WoS: 22
    Citation - Scopus: 24
    A Note on Determination of Oscillation Startup Condition
    (Springer, 2006) Singh, Vimal
    There prevails a widespread notion that, given a closed-loop system, oscillation will commence and build up therein if the magnitude of loop gain is greater than unity at the frequency at which the angle of loop gain is zero degree. Three novel examples in which this notion fails are presented.
  • Article
    Citation - WoS: 18
    Citation - Scopus: 18
    Growth, Electrical and Structural Characterization of Β-Gase Thin Films
    (Springer, 2003) Parlak, M; Qasrawi, AF; Erçelebi, Ç
    GaSe thin films were deposited onto the glass substrates kept at 200degrees and 300degreesC by the thermal evaporation of GaSe crystals under the pressure of 10(-5) Torr. X-ray analysis of the films revealed that films grown at 200. C are amorphous in nature while the films grown at 300degreesC are polycrystalline beta-GaSe. The temperature dependent electrical conductivity measurements in the region of 320-100 K for the films grown at 300degreesC showed that the transport mechanisms are the thermionic emission of charged carriers and the variable range hopping above and below 180 K, respectively. Space charge limited current (SCLC) studies have also been performed on these films through the current-voltage measurements at different temperatures and a dominant hole trap at 0.233 eV from the top of the valance band with a trap density of similar to1.6 x 10(11) cm(-3) is identified. (C) 2003 Kluwer Academic Publishers.
  • Article
    Weak Uncorrelatedness of Random Variables
    (Springer, 2006) Ostrovska, S
    New measures of independence for n random variables, based on their moments, are studied. A scale of degrees of independence for random variables which starts with uncorrelatedness (for n = 2) and finishes at independence is constructed. The scale provides a countable linearly ordered set of measures of independence.
  • Article
    Citation - WoS: 31
    Citation - Scopus: 30
    Characterizing Specific Riemannian Manifolds by Differential Equations
    (Springer, 2003) Erkekoglu, F; García-Río, E; Kupeli, DN; Ünal, B
    Some characterizations of certain rank-one symmetric Riemannian manifolds by the existence of nontrivial solutions to certain partial differential equations on Riemannian manifolds are surveyed.
  • Conference Object
    Citation - WoS: 22
    Citation - Scopus: 21
    Predicting dominant phytoplankton quantities in a reservoir by using neural networks
    (Springer, 2003) Gurbuz, H; Kivrak, E; Soyupak, S; Yerli, SV
    The Levenberg-Marquardt algorithm was used to train artificial neural networks to predict the abundance of Cyclotella ocellata Pant. and Cyclotella kutzingiana Thwaites using time, depth, temperature, pH, dissolved oxygen, and electrical conductivity as input parameters for the oligo-mesotrophic Kuzgun Dam Reservoir, Turkey. The data were collected in monthly intervals during two ice-free seasons: between April 2000-November 2000 and April 2001-November 2001. To reduce over-fitting of the neural network based models, we employed single hidden layer networks with early stopping of training. Correlation coefficients, of neural network predictions with measurements of abundance of Cyclotella ocellata Pant. and Cyclotella kutzingiana Thwaites were 0.88 and 0.86, respectively.
  • Article
    Citation - WoS: 42
    Citation - Scopus: 52
    A Comparative Study on the Surface Integrity of Plastic Mold Steel Due To Electric Discharge Machining
    (Springer, 2005) Ekmekci, B; Elkoca, O; Erden, A
    The violent nature of the electric discharge machining (EDM) process leads to a unique structure. on the surface of a machined part. In this study, the influence of electrode material and type of dielectric liquid on the surface integrity of plastic mold steel samples is investigated. The results have shown that regardless of the tool electrode and the dielectric liquid, the white layer is formed on machined surfaces. This layer is composed of cementite (Fe3C) and martensite distributed in retained austenite matrix forming dendritic structures, due to rapid solidification of the molten metal, if carbon-based dielectric liquid is used. The intensity of cracking increases at high pulse durations and low pulse currents. Cracks on the EDM surfaces have been found to follow the pitting arrangements with closed loops and to cross perpendicularly with radial cracks and continue to propagate when another discharge takes place, in the neighborhood. The amount of retained austenite phase and the intensity of microcracks have found to be much less in the white layer of the samples machined in de-ionized water dielectric liquid. The number of globule appendages attached to the surface increased when a carbon-based tool electrode material or a dielectric liquid was used during machining.
  • Article
    Citation - WoS: 26
    Citation - Scopus: 31
    Impact Assessment of Different Management Scenarios on Water Quality of Porsuk River and Dam System - Turkey
    (Springer, 2005) Muhammetoglu, A; Muhammetoglu, H; Oktas, S; Ozgokcen, L; Soyupak, S
    Porsuk Dam Reservoir (PDR), which is located on Porsuk River, is the main drinking water resource of Eskisehir City-Turkey. Both the river and the reservoir are under the threat of several domestic and industrial point sources and land-based diffuse pollution. The river water quality is very poor with high concentrations of nitrogen and phosphorus compounds at the entrance to Porsuk Reservoir. The reservoir shows symptoms of a hypertrophic lake. The expected responses of the whole river and reservoir system under different pollution control scenarios were estimated to develop plausible water quality management strategies. The adopted scenarios assumed different levels of treatment for the major domestic point sources that include conventional treatment and tertiary treatment. The contemporary Turkish Allowable Discharge Limits (ADLs) and the best available technology choices were the investigated treatment options for the major industries. The expected improvements of water quality characteristics under the management scenario options have been estimated by means of mathematical models. The model choices were the QUAL2E for the river and BATHTUB for the reservoir. Recommendations for different levels of treatment were derived in order to improve the water quality both within the river and in the reservoir.
  • Conference Object
    Citation - WoS: 16
    Citation - Scopus: 18
    Determinants of Entry in Turkish Manufacturing Industries
    (Springer, 2006) Gunalp, Burak; Cilasun, Seyit Mumin
    The entry of new firms into markets plays an important role in efficient resource allocation and evolution for long term economic growth. Employing dynamic panel data techniques, this paper investigates entry behavior in 66 four-digit Turkish manufacturing industries for the 1993-1999 period. The results of this paper suggest that potential entrants observe the market before the entry takes place; entry is, in general, a follow-up process; and incumbent firms seem to collude to prevent entry in Turkish manufacturing industries. In addition, the real interest rate appears to be a very important determinant of entry decision.
  • Article
    Citation - WoS: 14
    Citation - Scopus: 14
    Fuzzy Logic Model To Estimate Seasonal Pseudo Steady State Chlorophyll-A Concentrations in Reservoirs
    (Springer, 2004) Soyupak, S; Chen, DG
    A fuzzy logic model is developed to estimate pseudo steady state chlorophyll-a concentrations in a very large and deep dam reservoir, namely Keban Dam Reservoir, which is also highly spatial and temporal variable. The estimation power of the developed fuzzy logic model was tested by comparing its performance with that from the classical multiple regression model. The data include chlorophyll-a concentrations in Keban lake as a response variable, as well as several water quality variables such as PO4 phosphorus, NO3 nitrogen, alkalinity, suspended solids concentration, pH, water temperature, electrical conductivity, dissolved oxygen concentration and Secchi depth as independent environmental variables. Because of the complex nature of the studied water body, as well as non-significant functional relationships among the water quality variables to the chlorophyll-a concentration, an initial analysis is conducted to select the most important variables that can be used in estimating the chlorophyll-a concentrations within the studied water body. Following the outcomes from this initial analysis, the fuzzy logic model is developed to estimate the chlorophyll-a concentrations and the advantages of this new model is demonstrated in model fitting over the traditional multiple regression method.
  • Article
    Citation - WoS: 22
    Citation - Scopus: 22
    Optical Properties of Tlins2 Layered Single Crystals Near the Absorption Edge
    (Springer, 2006) Qasrawi, A. F.; Gasanly, N. M.
    The sample thickness effect on the optical properties of TlInS2 layered crystals has been investigated at room temperature. The absorption coefficient of the samples calculated from the experimental transmittance and reflectance in the photon energy range of 1.10-3.10 eV has two absorption regions. The first is a long-wavelength region of 1.16-1.28 eV. The second region lies above 2.21 eV with a thickness-dependent indirect band gap. The energy gap decreases from 2.333 to 2.255 eV as the sample thickness increases from 27 to 66 mu m. The differential spectra of absorption coefficient demonstrates the existence of a thickness-dependent impurity level being lowered from 2.360 to 2.307 eV as sample thickness increases from 27 to 66 mu m. (c) 2006 Springer Science + Business Media, Inc.