52 results
Search Results
Now showing 1 - 10 of 52
Article Citation - WoS: 39Citation - Scopus: 44A Novel Treatment Strategy for Preterm Birth: Intra-Vaginal Progesterone-Loaded Fibrous Patches(Elsevier, 2020) Cam, Muhammet Emin; Hazar-Yavuz, Ayse Nur; Cesur, Sumeyye; Ozkan, Ozan; Alenezi, Hussain; Sasmazel, Hilal Turkoglu; Edirisinghe, MohanProgesterone-loaded poly(lactic) acid fibrous polymeric patches were produced using electrospinning and pressurized gyration for infra-vaginal application to prevent preterm birth. The patches were intravaginally inserted into rats in the final week of their pregnancy, equivalent to the third trimester of human pregnancy. Maintenance tocolysis with progesterone-loaded patches was elucidated by recording the contractile response of uterine smooth muscle to noradrenaline in pregnant rats. Both progesterone-loaded patches indicated similar results from release and thermal studies, however, patches obtained by electrospinning had smaller average diameters and more uniform dispersion compared to pressurized gyration. Patches obtained by pressurized gyration had better results in production yield and tensile strength than electrospinning; thereby pressurized gyration is better suited for scaled-up production. The patches did not affect cell attachment, viability, and proliferation on Vero cells negatively. Consequently, progesterone-loaded patches are a novel and successful treatment strategy for preventing preterm birth.Article Citation - WoS: 19Citation - Scopus: 21Lyapunov Type Inequalities for Mixed Nonlinear Riemann-Liouville Fractional Differential Equations With a Forcing Term(Elsevier, 2017) Agarwal, Ravi P.; Ozbekler, AbdullahIn this paper, we present some new Lyapunov and Hartman type inequalities for Riemann-Liouville fractional differential equations of the form ((a)D(alpha)x)(t) + p(t) vertical bar x(t) vertical bar(mu-1) x(t) + q(t) vertical bar x(t) vertical bar(gamma-1) x(t) = f(t), where p, q, f are real-valued functions and 0 < gamma < 1 < mu < 2. No sign restrictions are imposed on the potential functions p, q and the forcing term f. The inequalities obtained generalize and compliment the existing results for the special cases of this equation in the literature. (C) 2016 Elsevier B.V. All rights reserved.Article Citation - WoS: 45Citation - Scopus: 49Recrystallization and Grain Growth Kinetics of In718 Manufactured by Laser Powder Bed Fusion(Elsevier, 2022) Dogu, Merve Nur; Davut, Kemal; Obeidi, Muhannad Ahmed; Yalcin, Mustafa Alp; Gu, Hengfeng; Low, Thaddeus Song En; Brabazon, DermotThe recrystallization and grain growth behaviour of IN718 alloy additively manufactured by laser powder bed fusion (L-PBF) is presented herein. The effects of three different temperatures (1050, 1150 and 1250 degrees C) and holding times (15, 45 and 90 min) were investigated. The texture evolution of the samples was recorded via electron backscatter diffraction (EBSD). The as-built sample is composed of bowl-shaped melt pools, a chessboard-like grain pattern and has a cube texture {100}<001>. Recrystallized grains were observed in the samples treated at 1150 degrees C for 15 min, as well as the samples treated for longer periods and at higher temperatures. Recrystallization was observed to start from high dislocation density regions, including the overlapping melt pools and the borders of the chessboard-like pattern. The initial cube texture transforms into a first-generation cube-twin texture {122}<212> via a twinning-assisted recrystallization mechanism. Then, those recrystallization nuclei sweep through the high defect density matrix; during which almost no new twins are formed. The samples treated at 1250 degrees C are almost completely recrystallized, which forms a weaker cube texture and a stronger P-orientation {011}<112>. However, the growth of recrystallized grains is very limited due to the presence of non-coherent precipitates. (C) 2022 The Author(s). Published by Elsevier B.V.Article Citation - WoS: 22Citation - Scopus: 25Effect of Solution Heat Treatment on the Microstructure and Crystallographic Texture of In939 Fabricated by Powder Bed Fusion-Laser Beam(Elsevier, 2023) Dogu, Merve Nur; Ozer, Seren; Yalcin, Mustafa Alp; Davut, Kemal; Bilgin, Guney Mert; Obeidi, Muhannad Ahmed; Brabazon, DermotThe effect of various solution heat treatment temperatures (i.e., 1120, 1160, 1200 and 1240 & DEG;C) on the microstructure, grain morphology and crystallographic texture of IN939 fabricated by powder bed fusion-laser beam (PBF-LB) was investigated. Microstructural analyses showed that the high-temperature gradient and rapid solidification of the PBF-LB processing caused different resulting microstructures compared to conventionally pro-duced counterparts. The melt pool morphologies and laser scanning paths were examined in the as-fabricated samples in the XZ-and XY-planes, respectively. After the application of solution heat treatment at 1120 & DEG;C, the as-fabricated PBF-LB initial microstructure was still apparent. For solution heat treatments of 1200 & DEG;C and above, the melt pool and scanning path morphologies disappeared and converted into a mixture of columnar grains in the XZ-plane and equiaxed grains in the XY-plane. On the other hand, large equiaxed grains were observed when the samples were solutionized at 1240 & DEG;C. Additionally, g' phase precipitated within the matrix after all solution heat treatment conditions, which led to increase in the microhardness values. According to electron backscatter diffraction (EBSD) analyses, both as-fabricated and solution heat-treated samples had intense texture with {001} plane normal parallel to the building direction. The first recrystallized grains began to appear when the samples were subjected to the solution heat treatment at 1160 & DEG;C and the fraction of the recrystallized grains increased with increasing temperature, as supported by kernel average misorientation (KAM) and grain spread orientation (GOS) analyses.& COPY; 2023 The Author(s). Published by Elsevier B.V. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).Article Citation - WoS: 5Citation - Scopus: 7Design of Novel Tellurium and Selenium Containing Semiconducting Polymers Using Quantum Mechanical Tools(Elsevier, 2017) Kaya, Birnur; Kayi, HakanStructural, optical and electronic properties of the two novel donor-acceptor-donor type conjugated polymers based on 4,7-di(selenophen-2-yl)benzo[c][1,2,5]selenadiazole (SeSeSe) and 4,7-di(tellurophen-2-yl)benzo[c][1,2,5]telluradiazole (TeTeTe) are investigated by means of quantum chemical calculations utilizing conventional and long-range corrected hybrid functionals. The lowest energy structures of the SeSeSe and TeTeTe monomers and oligomers are revealed through conformational analysis, while their electronic properties are obtained from density functional theory (DFT) molecular orbital calculations and optical properties are obtained from the time dependent DFT (TD-DFT) calculations for UV-vis absorption spectra. Electronic band gaps that directly affect the semiconducting properties of these novel polymers are calculated by using linear regression analysis of DFT data, and also periodic boundary conditions calculations (PBC-DFT). Our results indicate that SeSeSe and TeTeTe polymers have considerably lower band gap values than that of their furan-, thiophene-, benzooxadiazole- and benzothiadiazole-based analogs. The novel SeSeSe and TeTeTe polymers with improved optical and electronic properties may have an important role in the near future, especially for the optoelectronic and photovoltaic applications. (C) 2016 Elsevier B.V. All rights reserved.Article Citation - WoS: 10Citation - Scopus: 11Low Temperature Thermoluminescence of Gd2o3< Nanoparticles Using Various Heating Rate and tmax< - texc< Methods(Elsevier, 2019) Delice, Serdar; Isik, Mehmet; Gasanly, Nizami M.Thermoluminescence (FL) measurements for Gd2O3 nanoparticles were carried out for various heating rates between 0.3 and 0.8 K/s at low temperatures (10-280 K). TL spectrum exhibited two observable and one faint peaks in the temperature region of 10-100 K, and four peaks in the temperature region of 160-280 K. Heating rate analysis was achieved to understand the behaviors of trap levels. It was seen that the peak maximum temperatures and TL intensities of all peaks increase with increasing heating rate. This behavior was ascribed to anomalous heating rate effect. T-max - T(exc )analysis was accomplished for TL, peaks at relatively higher temperature region to reveal the related traps depths. T-max - T-exc plot presented a staircase structure indicating that the TL glow curve is composed of well separated glow peaks. Mean activation energies of trapping centers corresponding to these separated peaks were found as 0.43, 0.50, 0.58 and 0.80 eV.Article Citation - WoS: 7Citation - Scopus: 7Rescue: Wireless Power-Enabled Communication Architecture for Earthquake Rescue Operations(Elsevier, 2020) Badirkhanli, Orkhan; Akan, Ozgur B.; Ergul, OzgurIn a natural disaster such as an earthquake, it is vital to know the number of people trapped under the ruins. To address this problem, we propose RESCUE - wiREless backScattering CommUnication based disastEr recovery system. RESCUE is composed of special Radio-frequency identification (RFID) readers and sensors that are used to determine the total number of people under the ruins. Passive wireless sensor nodes are placed inside the building during construction and are equipped with a camera that is activated during an earthquake. After the earthquake, communication to the passive tags of sensors is achieved by wireless power transfer from a reader located outside the ruins. Tags harvest this energy and send the image data stored by the camera. We also design an antenna structure to maximize simultaneous wireless information and power transfer (SWIPT) for devices under ruins. We analyze the communication channel between reader and sensors and derive a channel model over ruins. Furthermore, we obtain the results of experimental study where we validate the derived channel model. Results show that RESCUE can collect the desired data in a relatively short time, and hence, is a promising disaster recovery system architecture. (C) 2019 Elsevier B.V. All rights reserved.Conference Object Citation - WoS: 1Citation - Scopus: 2Hardware-In Assessment of a Fault Tolerant Fuzzy Control Scheme for an Offshore Wind Farm Simulator(Elsevier, 2022) Simani, Silvio; Farsoni, Saverio; Turhan, CihanTo enhance both the safety and the efficiency of offshore wind park systems, faults must be accommodated in their earlier occurrence, in order to avoid costly unplanned maintenance. Therefore, this paper aims at implementing a fault tolerant control strategy by means of a data-driven approach relying on fuzzy logic. In particular, fuzzy modelling is considered here as it enables to approximate unknown nonlinear relations, while managing uncertain measurements and disturbance. On the other hand, the model of the fuzzy controller is directly estimated from the input-output signals acquired from the wind farm system, with fault tolerant capabilities. In general, the use of purely nonlinear relations and analytic methods would require more complex design tools. The design is therefore enhanced by the use of fuzzy model prototypes obtained via a data-driven approach, thus representing the key point if real-time solutions have to implement the proposed fault tolerant control strategy. Finally, a high-fidelity simulator relying on a hardware-in-the-loop tool is exploited to verify and validate the reliability and robustness characteristics of the developed methodology also for on-line and more realistic implementations. Copyright (C) 2022 The Authors.Article Citation - WoS: 3Citation - Scopus: 3Macroprudential Policies and Current Account Balance(Elsevier, 2022) Ozcan, Guelserim; Ekinci, Mehmet FatihMacroprudential policies have become essential tools for policymakers to maintain financial stability. We investigate the impact of macroprudential policies on the current account balance, considering the link between external imbalances and financial stability. Building on a panel VAR model, we further document that usage of a macroprudential instrument is associated with an improvement in the current account balance. Our findings suggest that the positive impact of macroprudential policy measures on the current account balance is more substantial in the deficit countries. (c) 2022 Economic Society of Australia, Queensland. Published by Elsevier B.V. All rights reserved.Review Citation - WoS: 145Citation - Scopus: 189Challenges and Best Practices in Industry-Academia Collaborations in Software Engineering: a Systematic Literature Review(Elsevier, 2016) Garousi, Vahid; Petersen, Kai; Ozkan, BarisContext: The global software industry and the software engineering (SE) academia are two large communities. However, unfortunately, the level of joint industry-academia collaborations in SE is still relatively very low, compared to the amount of activity in each of the two communities. It seems that the two 'camps' show only limited interest/motivation to collaborate with one other. Many researchers and practitioners have written about the challenges, success patterns (what to do, i.e., how to collaborate) and anti-patterns (what not do do) for industry-academia collaborations. Objective: To identify (a) the challenges to avoid risks to the collaboration by being aware of the challenges, (b) the best practices to provide an inventory of practices (patterns) allowing for an informed choice of practices to use when planning and conducting collaborative projects. Method: A systematic review has been conducted. Synthesis has been done using grounded-theory based coding procedures. Results: Through thematic analysis we identified 10 challenge themes and 17 best practice themes. A key outcome was the inventory of best practices, the most common ones recommended in different contexts were to hold regular workshops and seminars with industry, assure continuous learning from industry and academic sides, ensure management engagement, the need for a champion, basing research on real world problems, showing explicit benefits to the industry partner, be agile during the collaboration, and the co-location of the researcher on the industry side. Conclusion: Given the importance of industry-academia collaboration to conduct research of high practical relevance we provide a synthesis of challenges and best practices, which can be used by researchers and practitioners to make informed decisions on how to structure their collaborations. (C) 2016 Elsevier B.V. All rights reserved.
