6 results
Search Results
Now showing 1 - 6 of 6
Article Integration of Conductive Additives To Pla-Based Biodegradable Composite Films To Improve Their Electrical, Mechanical, and Physical Characteristics(Wiley, 2025) Rakea, Aisha Muthana; Tirkes, Suha; Yildiz, Umit Hakan; Tirkes, Seha; Tayfun, UmitIn this study, Oltu stone powder (OS) and Fe3O4/mica-based conductive pigment (CP) were compounded with polylactic acid (PLA) to develop bio-based conductive films. Four different concentrations of 1%, 10%, 20%, and 30% of powders were applied to determine their optimal concentration in the PLA matrix. The mechanical, thermomechanical, electrical conductivity, melt-flow, and morphological properties of composite films were reported using the tensile, hardness, and impact tests, dynamic mechanical analyses test, linear four-probe method, and atomic force microscopy (AFM), melt-flow index measurements, and scanning electron microscopy methodology, respectively. According to tensile test results, tensile strength and modulus characteristics of PLA decrease with additive integration. However, the elongation value of PLA declined as OS and CP loadings increased. The maximum tensile performance was attained for composites filled with 20% of both CP and OS. The unfilled PLA's Shore D value rose by including OS and CP. At the same loading levels, carbon-based OS produced comparatively higher hardness values than CP, which comprised iron oxide and alumina silicate. AFM analysis revealed that both CP and OS inclusions caused enhancements in surface roughness as their filling amounts increased. In summary, composite samples exhibiting a 20% loading ratio of both OS and CP showed significantly improved mechanical and thermomechanical performances compared to other composites. Composite films with 1% additives have the potential to be applied in electrostatic packing. Additionally, 3D-printed components can be fabricated using composites for applications where appropriate mechanical resistance and electrical conductivity specifications are required.Article Citation - WoS: 8Citation - Scopus: 9Contribution of Surface Silanization Process on Mechanical Characteristics of Tpu-Based Composites Involving Feldspar and Quartz Minerals(Wiley, 2023) Bouzmane, Hajar; Tirkes, Suha; Yilmaz, Volkan Murat; Tayfun, Umit; Tirkes, SehaIn this study, quartz and feldspar powders were surface treated using a silane coupling agent to achieve a more compatible mineral surface with the polymer matrix. Details of surface characteristics of minerals were examined by energy-dissipative X-ray spectroscopy, contact angle measurements, and infrared spectroscopy. Thermoplastic polyurethane-TPU was compounded with minerals using the melt-blending technique. Mechanical, thermo-mechanical, melt-flow, and morphological characterizations of TPU and relevant composites were performed by utilizing tensile and Shore hardness tests, dynamic mechanical analysis (DMA), melt flow index (MFI) measurements, and scanning electron microscopy (SEM), respectively. Water repellency of TPU and composites were also evaluated experimentally. Effects of surface treatments were discussed by comparing the results of composites filled with pristine and modified minerals. Results revealed that enrichment of quartz and feldspar surfaces confer mechanical and thermo-mechanical performance of composites. Mineral inclusions caused no drastic changes to the MFI parameter of TPU. The silane layer on the mineral surface displayed a barrier effect to water uptake of composites. Homogeneous dispersion and improved interfacial adhesion of mineral particles to the TPU phase were confirmed with help of SEM observations. Quartz exhibited slightly higher performance thanks to its silica-rich composition. The findings of this research exhibited the considerable influence of the silane layer on the mineral surface on the mechanical performance of TPU-based composites.Article Citation - WoS: 14Citation - Scopus: 19Influence of Carbon Nanotube Inclusions To Electrical, Thermal, Physical and Mechanical Behaviors of Carbon-Fiber Abs Composites(Springer Japan Kk, 2022) Akar, Alinda Oyku; Yildiz, Umit Hakan; Tirkes, Seha; Tayfun, Umit; Hacivelioglu, FerdaAcrylonitrile-butadiene-styrene (ABS) terpolymer was compounded with short carbon fiber (CF) and carbon nanotube (CNT) using a micro-extruder followed by the injection molding process. Composite samples were fabricated with loading ratios of 20 wt.% CF and 0.1, 0.5 and 1.0 wt.% of CNT. Mechanical, electrical, thermo-mechanical, thermal, melt-flow, and structural investigations of ABS-based composites were conducted by performing tensile, impact, hardness, and wear tests, conductive atomic force microscopy (AFM), dynamic mechanical analysis (DMA), thermal gravimetric analysis (TGA), melt flow rate test (MFR), scanning electron microscopy (SEM) characterization techniques, respectively. According to mechanical test data of resultant composites including tensile and impact test findings, CNT additions led to the remarkable increase in tensile strength and impact resistance for CF reinforced ABS composites. The formation of synergy between CNT nanoparticles and CF was confirmed by electrical conduction results. The conductive path in ABS/CF composite system was achieved by the incorporation of CNT with different loading levels. SEM micrographs of composites proved that CNT nanoparticles exhibited homogeneous dispersion into ABS matrix for lower loadings. [GRAPHICS] .Conference Object Citation - WoS: 33Citation - Scopus: 35Enhancement of Mechanical, Thermal and Water Uptake Performance of Tpu/Jute Fiber Green Composites Via Chemical Treatments on Fiber Surface(Walter de Gruyter Gmbh, 2020) Salem, Tuffaha Fathe; Tirkes, Seha; Akar, Alinda Oyku; Tayfun, UmitChopped jute fiber (JF) surfaces were modified using alkaline, silane and eco-grade epoxy resin. Surface characteristics of jute fibers were confirmed by FTIR and EDX analyses. JF filled polyurethane elastomer (TPU) composites were prepared via extrusion process. The effect of surface modifications of JF on mechanical, thermo-mechanical, melt-flow, water uptake and morphological properties of TPU-based eco-composites were investigated by tensile and hardness tests, dynamic mechanical analysis (DMA), melt flow index (MFI) test, water absorption measurements and scanning electron microscopy (SEM) techniques, respectively. Mechanical test results showed that silane and epoxy treated JF additions led to increase in tensile strength, modulus and hardness of TPU. Glass transition temperature (T-g) of TPU rose up to higher values after JF inclusions regardless of treatment type. Si-JF filled TPU exhibited the lowest water absorption among composites. Surface treated JFs displayed homogeneous dispersion into TPU and their surface were covered by TPU according to SEM micro-photographs.Article Citation - WoS: 17Citation - Scopus: 19Physical and Mechanical Performance of Bentonite and Barite Loaded Low Density Polyethylene Composites: Influence of Surface Silanization of Minerals(Sage Publications Ltd, 2020) Elkawash, Hesham; Tirkes, Seha; Hacioglu, Firat; Tayfun, UmitIn this study, two kinds of mineral fillers, bentonite (BNT) and barite (BRT), were incorporated into low density polyethylene (LDPE) by extrusion process. Silane treatment was applied to BRT and BNT surfaces in order to increase their compatibility with LDPE matrix. Surface characteristics of fillers were examined by Fourier transformed infrared spectroscopy (FTIR). LDPE-based composites were prepared at a constant concentration of 10%wt for each additives. Test samples were shaped by injection molding process. Mechanical, thermo-mechanical, water repellency, melt-flow and morphological characterizations of LDPE and its composites were performed by tensile and impact tests, dynamic mechanical analysis (DMA), water absorption test, melt flow index (MFI) measurements and scanning electron microscopy (SEM) technique, respectively. Test results showed that surface treatments led to increase for final properties of composites since they promoted to stronger adhesion between minerals and LDPE matrix compared to untreated ones. Tensile and impact strength values, storage modulus and glass transition temperature of LDPE were improved by inclusion of silane treated minerals. BRT and BNT additions caused no remarkable changes with regard to MFI of LDPE. Additionally, silane modified mineral filled composites exhibited remarkable water resistance behavior. According to SEM analysis of composites, silane treated BNT and BRT containing samples displayed homogeneous dispersions into LDPE phase whereas debondings were observed for untreated BNT and BRT filled composites due to their weak adhesion to polymer matrix.Article Citation - WoS: 3Citation - Scopus: 3Comparative Performance Study of Acidic Pumice and Basic Pumice Inclusions for Acrylonitrile-Butadiene Composite Filaments(Mary Ann Liebert, inc, 2024) Tayfun, Umit; Tirkes, Seha; Dogan, Mehmet; Tirkes, Suha; Zahmakiran, MehmetThis study aims to evaluate the effective use of porous pumice powder as an additive in acrylonitrile-butadiene-styrene (ABS)-based composite materials. The influence of pumice addition on mechanical, thermomechanical, thermal, and physical properties of ABS filaments was reported. Two types of pumice, namely acidic pumice (AP) and basic pumice (BP), were melt compounded with ABS at loading levels of 5%, 10%, 15%, and 20% by weight using the melt extrusion preparation method. Composites were shaped into dog bone test specimens by the injection molding process. The physical properties of pumice powders were investigated by particle size analysis and X-ray spectroscopy techniques. Mechanical, thermomechanical, thermal, melt flow, and morphological behaviors of ABS/AP and ABS/BP composite filaments were proposed. According to test results, pumice addition led to an increase in the mechanical response of ABS up to a filling ratio of 10%. Further inclusion of pumice caused sharp reduction due to the possible agglomeration of pumice particles. Composites filled with AP yielded remarkably higher mechanical performance in terms of tensile, impact, and hardness strength compared with BP-loaded composites. According to thermal analyses, ABS exhibited higher thermal stability after incorporation of AP and BP. Pumice addition also resulted in raising the glass transition temperature of ABS. Melt flow index (MFI) findings revealed that addition of two types of pumice led to an opposite trend in the melt flow behavior of ABS filaments. Homogeneous dispersion of pumice particles into the ABS matrix when adding low amounts, as well as reduction in dispersion homogeneity with high amounts, of AP and BP was confirmed by scanning electron microscopy (SEM) micrographs.
