2 results
Search Results
Now showing 1 - 2 of 2
Article Integration of Conductive Additives To Pla-Based Biodegradable Composite Films To Improve Their Electrical, Mechanical, and Physical Characteristics(Wiley, 2025) Rakea, Aisha Muthana; Tirkes, Suha; Yildiz, Umit Hakan; Tirkes, Seha; Tayfun, UmitIn this study, Oltu stone powder (OS) and Fe3O4/mica-based conductive pigment (CP) were compounded with polylactic acid (PLA) to develop bio-based conductive films. Four different concentrations of 1%, 10%, 20%, and 30% of powders were applied to determine their optimal concentration in the PLA matrix. The mechanical, thermomechanical, electrical conductivity, melt-flow, and morphological properties of composite films were reported using the tensile, hardness, and impact tests, dynamic mechanical analyses test, linear four-probe method, and atomic force microscopy (AFM), melt-flow index measurements, and scanning electron microscopy methodology, respectively. According to tensile test results, tensile strength and modulus characteristics of PLA decrease with additive integration. However, the elongation value of PLA declined as OS and CP loadings increased. The maximum tensile performance was attained for composites filled with 20% of both CP and OS. The unfilled PLA's Shore D value rose by including OS and CP. At the same loading levels, carbon-based OS produced comparatively higher hardness values than CP, which comprised iron oxide and alumina silicate. AFM analysis revealed that both CP and OS inclusions caused enhancements in surface roughness as their filling amounts increased. In summary, composite samples exhibiting a 20% loading ratio of both OS and CP showed significantly improved mechanical and thermomechanical performances compared to other composites. Composite films with 1% additives have the potential to be applied in electrostatic packing. Additionally, 3D-printed components can be fabricated using composites for applications where appropriate mechanical resistance and electrical conductivity specifications are required.Article Citation - WoS: 8Citation - Scopus: 9Contribution of Surface Silanization Process on Mechanical Characteristics of Tpu-Based Composites Involving Feldspar and Quartz Minerals(Wiley, 2023) Bouzmane, Hajar; Tirkes, Suha; Yilmaz, Volkan Murat; Tayfun, Umit; Tirkes, SehaIn this study, quartz and feldspar powders were surface treated using a silane coupling agent to achieve a more compatible mineral surface with the polymer matrix. Details of surface characteristics of minerals were examined by energy-dissipative X-ray spectroscopy, contact angle measurements, and infrared spectroscopy. Thermoplastic polyurethane-TPU was compounded with minerals using the melt-blending technique. Mechanical, thermo-mechanical, melt-flow, and morphological characterizations of TPU and relevant composites were performed by utilizing tensile and Shore hardness tests, dynamic mechanical analysis (DMA), melt flow index (MFI) measurements, and scanning electron microscopy (SEM), respectively. Water repellency of TPU and composites were also evaluated experimentally. Effects of surface treatments were discussed by comparing the results of composites filled with pristine and modified minerals. Results revealed that enrichment of quartz and feldspar surfaces confer mechanical and thermo-mechanical performance of composites. Mineral inclusions caused no drastic changes to the MFI parameter of TPU. The silane layer on the mineral surface displayed a barrier effect to water uptake of composites. Homogeneous dispersion and improved interfacial adhesion of mineral particles to the TPU phase were confirmed with help of SEM observations. Quartz exhibited slightly higher performance thanks to its silica-rich composition. The findings of this research exhibited the considerable influence of the silane layer on the mineral surface on the mechanical performance of TPU-based composites.
