15 results
Search Results
Now showing 1 - 10 of 15
Article Citation - WoS: 8Citation - Scopus: 8Complex Nodal Structure Phonons Formed by Open and Closed Nodal Lines in Coass and Na2cup Solids(Royal Soc Chemistry, 2022) Ding, Guangqian; Sun, Tingting; Surucu, Gokhan; Surucu, Ozge; Gencer, Aysenur; Wang, XiaotianTopological phononic states with nodal lines not only have updated our knowledge of the phases of matter in a fundamental way, but also have become a major frontier research direction in condensed matter physics. From a mathematical perspective, nodal line phonons can be divided into open and closed types. The present attempt is a report on the coexistence of such open and closed nodal line phonons in two realistic solids, CoAsS and Na2CuP, based on first-principles calculations. Furthermore, it is shown that the closed and the open nodal line states in CoAsS and Na2CuP have touching points and can form a complex nodal structure phonon in a momentum space. Due to the topologically non-trivial behavior of the complex nodal structure in both phonons, evident phononic surface states occur in the projected surfaces of both materials. In this way, these states, arising from the projected crossing points, can benefit experimental detection in follow-up studies. It has been stated that the open and closed nodal line states are formed by the crossings of two phonon branches and, hence, these two types of nodal line phonons are coupled with each other. The results obtained here could be considered as a breakthrough in clearly demonstrating the coexistence of the open and closed nodal line states in phonons and, for this reason, may inspire researchers seeking materials with such topological states in other bosons, such as photons.Article Citation - WoS: 28Citation - Scopus: 29The investigation of electronic, anisotropic elastic and lattice dynamical properties of MAB phase nanolaminated ternary borides: M 2 AlB 2 ( M = Mn , Fe and Co ) under spin effects(Elsevier Science Sa, 2020) Surucu, Gokhan; Yildiz, Bugra; Erkisi, Aytac; Wang, Xiaotian; Surucu, Ozge[No Abstract Available]Article Citation - WoS: 2Citation - Scopus: 2Investigation of Tungsten-Based Seleno-Chevrel Compounds With Different Compositions for Efficient Water Splitting(Wiley-v C H verlag Gmbh, 2023) Dag, Tugce Sevinc; Surucu, Gokhan; Gencer, Aysenur; Surucu, Ozge; Ozel, Faruk; Ciftci, YaseminThis study investigates the photocatalytic water splitting performance for NixW6Se8(x=1,2,3,4)${\mathrm{N}}{{\mathrm{i}}_{\mathrm{x}}}{{\mathrm{W}}_6}{\mathrm{S}}{{\mathrm{e}}_8}\;( {x = 1, 2, 3, 4} )$ Chevrel phases with the chemical formula M(x)Mo(6)Ch(8), where M is a metal and Ch is a chalcogen, with x being 0, 1, 2, 3, or 4. Density Functional Theory (DFT) is used to study the NixW6Se8(x=1,2,3,4)${\mathrm{N}}{{\mathrm{i}}_{\mathrm{x}}}{{\mathrm{W}}_6}{\mathrm{S}}{{\mathrm{e}}_8}{\mathrm{\;}}( {x = 1, 2, 3, 4} )$ Chevrel phases, which includes earth-abundant elements for this specific study as an essential consideration for photocatalytic water splitting. The electronic properties are calculated for the NiW6Se8 and Ni2W6Se8 compounds with thermodynamical, mechanical, and dynamic stabilities. For photocatalytic water splitting, the band gaps below 1.23 eV are excluded, and the conduction and valence band levels are determined to examine the reduction and oxidation potentials for efficient photocatalytic water-splitting materials. An examination of the selected band gaps, along with the conduction and valence band levels, reveals that NiW6Se8 is suitable for both reduction and oxidation reactions; whereas, Ni2W6Se8 is a convenient material only for the reduction reaction. This is the first attempt, as far as the literature reveals, to study Chevrel phases in detail and to identify a suitable compound for photocatalytic water splitting.Article Citation - WoS: 1Citation - Scopus: 1Penta-Graphene/SnS2 Heterostructures with Z-Scheme Charge Transfer for Efficient Photocatalytic Water Splitting(Amer Chemical Soc, 2025) Nasoz, Duygu Lale; Surucu, Ozge; Wang, Xiaotian; Surucu, Gokhan; Sarac, Yasemin; Gencer, AysenurThe present study explores the photocatalytic potential of penta-graphene (PG) and SnS2 monolayers, along with their heterostructures (PG/SnS2), using Density Functional Theory (DFT). Structural analysis confirms that the PG/SnS2 heterostructure exhibits enhanced stability, efficient charge separation, and suitable band alignment. Optimized lattice parameters (3.66 & Aring; for PG and 3.88 & Aring; for SnS2) closely matched literature values, while ab initio molecular dynamics (AIMD) confirmed thermodynamic stability at 300 K. The heterostructure's band gap of 2.75 eV (HSE method) supports visible light absorption, and the band edge positions enable hydrogen and oxygen evolution reactions across pH 0 to 6. Optical analysis reveals significant visible-light absorption with an optical band gap of 1.43 eV. Additionally, this study identifies a Z-scheme charge transfer mechanism in the PG/SnS2 heterostructure, facilitated by an internal built-in electric field that drives directional charge migration, effectively enhancing electron-hole separation and suppressing recombination losses. This Z-scheme mechanism optimizes redox reactions, making PG/SnS2 a highly efficient photocatalyst for solar-driven hydrogen production. Furthermore, the effect of water solvent is investigated, and it reveals that this heterostructure is stable under water solvent, having suitable band edges for the photocatalytic water splitting. These findings highlight the PG/SnS2 heterostructure as a promising candidate for sustainable hydrogen generation, offering a new perspective for the design of next-generation 2D photocatalytic materials.Article Citation - WoS: 7Citation - Scopus: 7Dft Insights Into Noble Gold-Based Compound Li5aup2: Effect of Pressure on Physical Properties(Amer Chemical Soc, 2023) Surucu, Gokhan; Gencer, Aysenur; Surucu, Ozge; Ali, Md. AshrafIn this study, the Li5AuP2 compound is investigated in detail due to the unique chemical properties of gold that are different from other metals. Pressure is applied to the compound from 0 to 25 GPa to reveal its structural, mechanical, electronic, and dynamical properties using density functional theory (DFT). Within this pressure range, the compound is optimized with a tetragonal crystal structure, making it mechanically and dynam-ically stable above 18 GPa and resulting in an increment of bulk, shear, and Young's moduli of Li5AuP2. Pressure application, furthermore, changes the brittle or ductile nature of the compound. The anisotropic elastic and sound wave velocities are visualized in three dimensions. The thermal properties of the Li5AuP2 compound are obtained, including enthalpy, free energy, entropy x T, heat capacity, and Debye temperature. The electronic properties of the Li5AuP2 compound are studied using the Perdew-Burke-Ernzerhof (PBE) and Heyd-Scuseria-Ernzerhof (HSE) functionals. The pressure increment is found to result in higher band gap values. The Mulliken and bond overlap populations are also determined to reveal the chemical nature of this compound. The optical properties, such as dielectric functions, refractive index, and energy loss function of the Li5AuP2 compound, are established in detail. To our knowledge, this is the first attempt to study this compound in such detail, thus, making the results obtained here beneficial for future studies related to the chemistry of gold.Article Citation - WoS: 4Citation - Scopus: 3Exploring the Thermal Stability of Sb2se3 for Potential Applications Through Advanced Thermal Analysis Methods(Amer Chemical Soc, 2025) Altuntas, Gozde; Isik, Mehmet; Surucu, Gokhan; Parlak, Mehmet; Surucu, OzgeAntimony selenide (Sb2Se3) is a promising material for energy applications, including photovoltaics, thermoelectrics, and photodetectors, due to its favorable electronic properties, availability, and low toxicity. However, its thermal stability, crucial for device efficiency and reliability, has been less explored, leaving a gap in understanding its high-temperature suitability. This study evaluates the thermal stability of Sb2Se3 using thermogravimetric analysis (TGA), differential thermal analysis (DTA), and differential scanning calorimetry (DSC). The results show that Sb2Se3 remains stable up to 500 degrees C, with two significant weight loss stages: 1.75% between 500 and 610 degrees C, and 3.50% between 610 and 775 degrees C, indicating decomposition processes. Activation energies for the decomposition phases were determined as 121.8 and 57.2 kJ/mol using the Coats-Redfern method. Additionally, an endothermic phase transition was observed between 599 and 630.6 degrees C via DSC analysis. These findings demonstrate Sb2Se3's potential for high-temperature energy applications, providing essential insights for optimizing its use in solar cells, thermoelectric devices, and other technologies.Article Citation - WoS: 19Citation - Scopus: 19A Study on the Dark and Illuminated Operation of Al/Si3< Schottky Photodiodes: Optoelectronic Insights(Springer Heidelberg, 2024) Surucu, Ozge; Yildiz, Dilber Esra; Yildirim, MuratThis work extensively investigates the operation of an Al/ Si3N4/p-Si Schottky-type photodiode under dark and varying illumination intensities. The photodiode is fabricated by employing the metal-organic chemical vapor deposition (MOCVD) method. A thorough electrical characterization is performed at room temperature, encompassing measurements of current-voltage (I-V), current-time (I-t), capacitance-time (C-t), and conductance time (G-t). The photodiode's rectification factor and reverse bias area increased under illumination. The relationship between light power density, barrier height, and diode ideality factor is found. The study also found a strong correlation between light intensity and applied voltage on series resistance (R-s) and shunt resistance (R-sh). R-s values are calculated using Cheung's functions, revealing the diode's resistance behavior. The study also examines the photodiode's photoconductivity and photoconductance, finding a non-linear relationship between photocurrent and illumination intensity, suggesting bimolecular recombination. Calculated photosensitivity (K), responsivity (R), and detectivity (D*) values show the device's light response effectiveness, but efficiency decreases at higher illumination intensities. Transient experiments indicate stable and reproducible photocurrent characteristics, revealing photogenerated charge temporal evolution. This study provides a complete understanding of the Al/Si3N4/p-Si Schottky photodiode's behavior under different illumination intensities. The findings advance optoelectronic device knowledge and enable their use in advanced technologies.Article Citation - WoS: 48Citation - Scopus: 50Lattice Dynamical and Thermo-Elastic Properties of M2alb (m = V, Nb, Ta) Max Phase Borides(Elsevier Science Sa, 2020) Surucu, Gokhan; Gencer, Aysenur; Wang, Xiaotian; Surucu, OzgeThe structural, electronic, dynamic, and thermo-elastic properties of M2AlB (X = V, Nb, Ta) MAX phase borides were investigated using first principle calculations as implemented in the Vienna Ab-initio Simulation Package (VASP) with the generalized gradient approximation (GGA). The obtained structural properties and formation energies showed the thermodynamic stability and synthesizability of M2AlB. The electronic band structures were determined and they revealed that these compounds had a metallic character. The dynamic stability of M2AlB compounds were investigated with phonon dispersion curves and these compounds were found to be dynamically stable. The elastic constants were also calculated to determine the mechanical stability and to obtain the polycrystalline properties such as bulk modulus, shear modulus, etc. The thermo-elastic properties (thermal expansion coefficient, heat capacity, entropy, and free energy) were studied in a temperature range in between 0 and 1000 K and a pressure range in between 0 and 30 GPa. In addition, the direction dependent sound wave velocities were studied in three dimensions. Moreover, the minimum thermal conductivities and the diffusion thermal conductivities of these compounds were determined. This work is the processor study for the investigation of the main physical properties of M2AlB (M = V, Nb, Ta) ceramic compounds to date. (C) 2019 Elsevier B.V. All rights reserved.Article Citation - WoS: 5Citation - Scopus: 5Performance Analysis of Cusbse2 Thin-Film Solar Cells With Cd-Free Window Layers(Elsevier, 2024) Surucu, Gokhan; Bal, Ersin; Gencer, Aysenur; Parlak, Mehmet; Surucu, OzgeThis study investigates novel thin-film solar cells featuring CuSbSe2 (CASe) with ZnSnO and ZnMgO windows in the layer superstrate structure. For glass/ITO/ZnMgO/CASe/Cu + Au, the J-V measurements reveal a shortcircuit current density (Jsc) of 19.4 mA/cm2, an open-circuit voltage (Voc) of 0.28 Volts, a fill factor (FF) of 39.14 %, and a power conversion efficiency (eta) of 2.13 %. Similarly, glass/ITO/ZnSnO/CASe/Cu + Au exhibits Jsc around 19.6 mA/cm2, Voc around 0.31 Volts, FF around 40 %, and eta of 2.43 %. This paper is a pioneering contribution, introducing novel thin-film solar cells with a distinctive superstrate structure utilizing CASe in conjunction with ZnSnO and ZnMgO windows. The comprehensive study presents the first-ever characterization and performance evaluation of these innovative configurations, shedding light on their unique potential in advancing sustainable solar energy technology.Article Citation - WoS: 4Citation - Scopus: 4Physical Characterization of Thermally Evaporated Sn-Sb Thin Films for Solar Cell Applications(Springer Heidelberg, 2023) Bektas, Tunc; Surucu, Ozge; Terlemezoglu, Makbule; Parlak, MehmetThe substitution of Sb in binary SnSe structure may lead to tailoring the physical properties of both SnSe and SbSe, promising absorber layers for thin film solar cells. The resulting Sn-Sb-Se structure could be an outstanding material for photovoltaic applications. In this study, Sn-Sb-Se thin films were deposited by thermal evaporation, and the effect of annealing on the films' structural, optical, and electrical properties were reported. XRD measurement shows that annealing at 300 degrees C yields the best crystalline quality, and structural parameters were calculated using XRD data. SEM and AFM measurements indicate deformation in the film surface after annealing at 400 degrees C. UV-Vis spectroscopy measurement provides a high absorption coefficient which indicates a direct band gap. The band gap and activation energies of the as-grown sample were found as 1.59 eV and 106.1 meV, respectively. The results of SEM, AFM, XRD, Raman, UV-Vis spectroscopy and temperature-dependent photoconductivity measurements were discussed throughout the paper.
