22 results
Search Results
Now showing 1 - 10 of 22
Article Citation - WoS: 44Citation - Scopus: 54Preparation and Photocatalytic Activity of G-c3n4< Heterojunctions Under Solar Light Illumination(Elsevier Sci Ltd, 2020) Gundogmus, Pelin; Park, Jongee; Ozturk, AbdullahThe solar light sensitive g-C3N4/TiO2 heterojunction photocatalysts containing 20, 50, 80, and 90 wt% graphitic carbon nitride (g-C3N4) were prepared by growing Titania (TiO2) nanoparticles on the surfaces of g-C3N4 particles via one step hydrothermal process. The hydrothermal reactions were allowed to take place at 110 degrees C at autogenous pressure for 1 h. Raman spectroscopy analyses confirmed that an interface developed between the surfaces of TiO2 and g-C3N4 nanoparticles. The photocatalyst containing 80 wt% g-C3N4 was subsequently heat treated 1 h at temperatures between 350 and 500 degrees C to improve the photocatalytic efficiency. Structural and optical properties of the prepared g-C3N4/TiO2 heterojunction nanocomposites were compared with those of the pristine TiO2 and pristine g-C(3)N(4 )powders. Photocatalytic activity of all the nanocomposites and the pristine TiO2 andg-C3N4 powders were assessed by the Methylene Blue (MB) degradation test under solar light illumination. g-C3N4/TiO2 heterojunction photocatalysts exhibited better photocatalytic activity for the degradation of MB than both pristine TiO2 and g-C3N4. The photocatalytic efficiency of the g-C3N4/TiO2 heterojunction photocatalyst heat treated at 400 degrees C for 1 his 1.45 times better than that of the pristine TiO2 powder, 2.20 times better than that of the pristine g-C3N4 powder, and 1.24 times better than that of the commercially available TiO2 powder (Degussa P25). The improvement in photocatalytic efficiency was related to i) the generation of reactive oxidation species induced by photogenerated electrons, ii) the reduced recombination rate for electron-hole pairs, and iii) large specific surface area.Article A Benchmark of Expert-Level Academic Questions to Assess AI Capabilities(Nature Portfolio, 2026) Phan, Long; Gatti, Alice; Li, Nathaniel; Khoja, Adam; Kim, Ryan; Ren, Richard; Scaramuzza, Davide; Park, JongeeBenchmarks are important tools for tracking the rapid advancements in large language model (LLM) capabilities. However, benchmarks are not keeping pace in difficulty: LLMs now achieve more than 90% accuracy on popular benchmarks such as Measuring Massive Multitask Language Understanding(1), limiting informed measurement of state-of-the-art LLM capabilities. Here, in response, we introduce Humanity's Last Exam (HLE), a multi-modal benchmark at the frontier of human knowledge, designed to be an expert-level closed-ended academic benchmark with broad subject coverage. HLE consists of 2,500 questions across dozens of subjects, including mathematics, humanities and the natural sciences. HLE is developed globally by subject-matter experts and consists of multiple-choice and short-answer questions suitable for automated grading. Each question has a known solution that is unambiguous and easily verifiable but cannot be quickly answered by internet retrieval. State-of-the-art LLMs demonstrate low accuracy and calibration on HLE, highlighting a marked gap between current LLM capabilities and the expert human frontier on closed-ended academic questions. To inform research and policymaking upon a clear understanding of model capabilities, we publicly release HLE at https://lastexam.ai.Article Citation - WoS: 12Citation - Scopus: 11Enhanced Bioactivity and Low Temperature Degradation Resistance of Yttria Stabilized Zirconia/Clay Composites for Dental Applications(Elsevier Sci Ltd, 2022) Tufan, Yigithan; Park, Jongee; Ozturk, Abdullah; Ercan, BaturYttria stabilized zirconia (YSZ)/clay composites were produced to improve osseointegration and undesired tetragonal-to-monoclinic phase transformation (low temperature degradation, LTD) of YSZ ceramics so that long-term clinical success of YSZ implants is achieved. Various amounts (0.5,1,2, and 4 wt%) of clay was incorporated to YSZ. Predetermined amounts of clay and YSZ were mixed and pressed uniaxially at 15 MPa into compacts that were subsequently pressureless sintered at 1450 degrees C. Density, compressive strength, hardness and indentation crack resistance of 4 wt% clay incorporated YSZ/clay composite were 5.77 +/- 0.01 g/cm3, 1188 +/- 121 MPa, 1223 +/- 9 HV, and 4.4 +/- 0.1 MPa root m, respectively. Additionally, biological properties of YSZ/clay composites were assessed in vitro using bone cells. Incorporation of 4 wt% clay significantly enhanced bone cell prolifer-ation, spreading, and functions. Moreover, a significant increase in the LTD resistance of YSZ was achieved upon 4 wt% clay incorporation. The findings collectively suggest that YSZ/clay composites have a potential to be used as an alternative material for dental applications.Article Citation - WoS: 32Citation - Scopus: 28Photocatalytic activity of hydroxyapatite-precipitated potassium titanate whiskers(Elsevier Science Sa, 2010) Park, JongeePhotocatalytic properties of hydroxyapatite (HAP)-precipitated multifunctional potassium titanate (KT) whiskers were investigated in terms of the decomposition of methylene blue (MB) in aqueous solution under UV irradiation. Hydroxyapatite was formed on the surface of KT whiskers through a biomimetic process in simulated body fluid (SBF). The SBF used in this investigation had concentrations of calcium and phosphate ions 10 times greater than those of human plasma. Results revealed that hydroxyapatite precipitation enhanced the photocatalytic activity of the KT whiskers. In the case of unreacted KT whisker, complete degradation of methylene blue took 5.5 h, on the other hand degradation time decreased to 3.5 h when the whisker was precipitated with hydroxyapatite. (C) 2009 Elsevier B.V. All rights reserved.Article Citation - WoS: 57Citation - Scopus: 68Mechanical Properties of B4c-sic Composites Fabricated by Hot-Press Sintering(Elsevier Sci Ltd, 2020) So, Sung Min; Choi, Woo Hyuk; Kim, Kyoung Hun; Park, Joo Seok; Kim, Min Suk; Park, Jongee; Kim, Hyung SunWe fabricated boron carbide-silicon carbide (B4C-SiC) composites by hot-press sintering without additives and evaluated the crystal phase, relative density, microstructure, and mechanical properties of the sintered body. When B4C and SiC were uniformly dispersed in the composite, crystal growth was inhibited, and a sintered body with a fine and uniform microstructure, with improved mechanical properties, was fabricated. The relative density of B4C-SiC composites sintered at temperatures lower than 2000 degrees C and 40 MPa of pressure exceeded 99.8%, and the bending strength and Vickers hardness at B4C 50 wt% were 645 MPa and 30.6 GPa, respectively.Article Citation - WoS: 25Citation - Scopus: 26Production and Properties of Tooth-Colored Yttria Stabilized Zirconia Ceramics for Dental Applications(Elsevier Sci Ltd, 2018) Kaplan, Melis; Park, Jongee; Kim, Soo Young; Ozturk, AbdullahDense zirconia stabilized with 3 mol% yttria ceramics were produced in disc shape by first cold isostatically pressing at 100 MPa and then sintering at 1450 degrees C at ambient laboratory conditions. Coloring was accomplished by immersion the discs in NiCl2, MoCl3, and NiCl2 + MoCl3 solutions for 5, 30, and 60 s. Different concentrations (0.1, 0.25, and 0.5 wt%) were applied to get the color of natural tooth. The density, color, microhardness, fracture toughness, compressive strength, and wear rate of the discs were measured to evaluate the suitability of the colored discs for dental applications. Color assessments were made by measuring CIE Lab L*, a*, b, and Delta E* values. Low temperature degradation of the samples was evaluated by aging sensitivity tests in autoclave for 2, 4, and 6 h. Results have shown that color produced depends on the kind and concentration of the colorant solution while time of immersion has no significant effect on coloring process. Coloring solutions containing 0.1 and 0.25 wt% MoCl3 provided clinically acceptable color with the Delta E* value ranging from 5.16 to 6.42 for dental applications.Article Citation - WoS: 30Citation - Scopus: 33Boron and zirconium co-doped TiO2 powders prepared through mechanical ball milling(Elsevier Sci Ltd, 2013) Tokmakci, Tolga; Ozturk, Abdullah; Park, JongeeA titania photocatalyst co-doped with boron and zirconium was prepared by mechanical ball milling. The resulting powder was characterized by XRD, XPS, SEM, and EDS. The photocatalytic performance of the powder was evaluated by degradation of methylene blue (MB) solution under UV illumination. XRD patterns were refined by Rietveld analysis to obtain accurate lattice parameters and positions of the atoms in the crystal structure of the photocatalyst. XRD, XPS, and Rietveld analysis results indicated that mechanical ball milling successfully weaved the dopant elements into the crystal structure and distorted the lattice of TiO2. Also, SEM micrographs confirmed that mechanical ball milling led to a decrease in average particle size of the photocatalyst. Boron and zirconium co-doped TiO2 particles exhibited a better visible light response and photocatalytic activity than those of the mono-element doped TiO2 (i.e. B-TiO2 and Zr-TiO2) and undoped TiO2 particles. The enhanced photocatalytic activity is attributed to the synergistic effects of boron zirconium co-doping and particle size reduction. (C) 2013 Elsevier Ltd and Techna Group S.r.l. All rights reserved.Article First-Principles Investigation of Kaolinite/YSZ Heterostructure for Solar-Driven Photocatalytic Hydrogen Production(Pergamon-Elsevier Science Ltd, 2025) Park, Jongee; Yu, Eunmi; Fatima, Syeda AfrinishThis work employs density functional theory (DFT) to elucidate the structural, electronic, and photocatalytic properties of a kaolinite/yttria-stabilized zirconia (Kaol/YSZ) heterostructure tailored for solar-driven hydrogen generation. The lattice mismatch between Kaol(001) and YSZ(111) was determined to be 4.4 % along the a-axis and 2.2 % along the b-axis. Two interface terminations were modeled: an O-terminated Si-O surface and an OH-terminated Al-OH surface. The OH-terminated interface demonstrated a stronger interfacial binding energy (-9.32 eV per cell) and enhanced thermodynamic stability, indicating its suitability for photocatalytic water splitting. Electronic structure analysis reveals that the Kaol/YSZ heterostructure exhibits a narrowed band gap of 1.46 eV relative to the isolated components, which promotes enhanced visible-light absorption. A type-II band alignment is observed, facilitating photoinduced electron transfer from the conduction band of YSZ to the conduction band of Kaol and promoting efficient charge separation. Hirshfeld charge analysis confirms the existence of a built-in electric field at the interface that further drives charge migration. Calculated optical absorption spectra shows a red shift in the heterostructure's absorption edge, extending its photoresponse into the visible region. Under simulated solar irradiation, photogenerated electrons preferentially migrate to Kaol for proton reduction, while holes remain on the YSZ surface to oxidize water, enabling simultaneous H2 evolution and O2 evolution pathways. These findings highlight the promise of the Kaol/YSZ heterostructure as a robust visible-light photocatalyst for sustainable hydrogen production and environmental remediation.Article Citation - WoS: 10Citation - Scopus: 10Computational Insight of Lithium Adsorption and Intercalation in Bilayer Tic3(Pergamon-elsevier Science Ltd, 2024) Park, Jongee; Fatima, Syeda AfrinishLithium-ion batteries (LIBs) have gained significant attention owing to their long lifespan. However, these batteries offer unmatched energy storage capacity and suffer from restricted lithium-ion mobility within the electrodes. Here, we employ first-principles calculation to investigate the two-dimensional TiC3 bilayer material. The results exhibit a remarkably high specific capacity of 1277 mAh/g and a low diffusion energy barrier of 0.12 eV. The TiC3 bilayer is anticipated to show high electrical conductivity, maintaining its metallicity due to strong bonding with four Li atoms. Additionally, its high thermal and dynamic stabilities are expected to significantly enhance the battery performance. Notably, the AB stacking bilayer TiC3 experiences a mere 6.01 % increase in volume, considerably smaller compared to the 28 % increase observed in the SiC bilayer. This suggests that TiC3 bilayers remain intact even at the highest concentration of lithium adsorptions. We also explored the solidelectrolyte interface (SEI) formation at the outset of battery operation using reactive force field molecular dynamics simulation. The reactive products of SEI are nicely matched with previous experimental and theoretical findings. All these intriguing properties position the TiC3 bilayer as an exceptionally promising material for use in LIBs.Article Citation - WoS: 51Citation - Scopus: 52A Dft Study of Tic3 as Anode Material for Li-Ion Batteries(Elsevier, 2023) Park, Jongee; Fatima, Syeda AfrinishTwo-dimensional monolayer titanium carbide (TiC3) was used to study as a suitable electrode material for lithium-ion batteries with first principles calculation. The monolayer TiC3 showed excellent structural stability, high mechanical stiffness and good electronic conductance behaviour. The adsorption of Li on the carbon rich composition of titanium carbide monolayer is predicted to be favourable. TiC3 structure has remained the same, preserving its metallicity after Li adsorption with attaining high electrical conductivity during lithiation/delithiation process. Especially, the theoretical specific capacity of TiC3 monolayer is high, up to 1916 mAh/g, which is five times higher than the practical graphite. The low open circuit voltage (0.26 V) and diffusion energy barrier (0.25 eV) are also beneficial for overall performance of LIBs. Importantly, during lithiation the change in area is very small and reaches only 8.1 % for full lithiation indicating that it can avoid the large volume expansion during charge/discharge cycles. Its excellent performance, including high melting temperature, dynamical and mechanical stability, can be credited to the rigidness of the TiC3. Given these advantages, that is, high specific capacity, low Li diffusion energy barrier, low open circuit voltage and high in-plane stiffness, TiC3 monolayer can be a promising anode material for lithium-ion batteries.
- «
- 1 (current)
- 2
- 3
- »