3 results
Search Results
Now showing 1 - 3 of 3
Review Citation - WoS: 53Citation - Scopus: 60Synthesis and Characterization of Hyperbranched and Air Drying Fatty Acid Based Resins(Elsevier Science Sa, 2006) Bat, E; Gündüz, G; Kisakürek, D; Akhmedov, IMIn this research four hyperbranched resins having fatty acid residues were synthesized. Dipentaerythritol, which was used as the core molecule of the resins, was twice esterified with dimethylol propionic acid. This resin was then esterified with the castor oil fatty acids. The hydroxyl group present in the ricinoleic acid which constitutes almost 87% of the castor oil fatty acids was then reacted with linseed oil fatty acids and benzoic acid. The linseed fatty acids were incorporated into the structure to esterify 0, 15, and 70% of the ricinoleic acid on mole basis. These resins were named as HBR-1, 2, and 3. A fourth resin (e.g. HBR-4) was synthesized by the incorporation of 15% linseed fatty acids + 55% benzoic acid'. The chemical characterization of the resins was achieved by FTIR spectroscopy and the thermal properties were determined by DSC. The physical and the mechanical properties of the resins were determined. The hardness value of the resins was measured as 24, 277 25, and 68 Persoz for HBR-1, 2, 3, and 4, respectively. The viscosity of the resins was measured as 17.3, 9.7, 5.8, and 17.5 Pa(.)s at a shear rate of 200 s(-1). The increase in the amount of the linseed fatty acids increased the hardness, and decreased the viscosity of the resins. All resins showed excellent adhesion, gloss, and flexibility. (c) 2006 Elsevier B.V. All rights reserved.Article Citation - WoS: 14Citation - Scopus: 16Synthesis and characterization of conducting and non-conducting polymers of sodium 2,4,6-trichlorophenolate by microwave initiation(Elsevier Sci Ltd, 2004) Çakmak, O; Bastürkmen, M; Kisakürek, D; Batürkmen, M.A novel synthesis of poly(dichlorophenylene oxide) and a conducting polymer were achieved simultaneously from 2,4,6-trichlorophenol in a very short time, using microwave energy. The characterizations of poly(dichlorophenylene oxide) and the conducting polymer were performed by DSC, TGA, elemental analysis, FTIR, H-1 and C-13 NMR, SEM, MS and X-ray diffraction spectrometer analyses. The combined molecular weight of the polymer, 1.8 x 10(4), was determined by using viscometry measurement. Poly(dichlorophenylene oxide) displaces selectivity in the favor of mainly 1,2-addition structure. The optimum conditions for the polymer and the conducting polymer synthesis were 70 W for 5 min and 100 W for 1 min, respectively. The direct synthesis of highly conducting polymer, with the conductivity of 0.3 S cm(-2) were achieved in the absence of applied doping process in a very short time sequence. Conductivity-temperature relation was examined for the conducting polymer. (C) 2004 Published by Elsevier Ltd.Article Citation - WoS: 4Citation - Scopus: 7Simultaneous Novel Synthesis of Conducting and Non-Conducting Halogenated Polymers by Electroinitiation of (2,4,6-Trichloro or 2,6-Dichlorophenolato)ni(ii) Complexes(Elsevier Sci Ltd, 2005) Özalp-Yaman, S; Özalp Yaman, Şeniz; Bastürkmen, M; Kisakürek, D; Özalp Yaman, Şeniz; Chemical Engineering; Chemical EngineeringNiL2(Ph)(2)(.)xH(2)O [L=3,5-dimethylpyrazole or N-methyl imidazole; Ph=DCP or TCP; x=0, 1 or 3] complexes were synthesised and characterised by analytical and spectroscopic methods using elemental analysis and FTIR. The electrochemical behavior of the complexes was studied by cyclic voltammetry in tetrabutylammoniumtetrafluoroborate-N,N-dimethylformamide electrolyte-sol vent couple. Cyclic voltammogram of the complexes displayed two-step oxidation processes under the nitrogen gas atmosphere. The polymerization of the complexes was accomplished in the same solvent-electrolyte couple by the constant potential electrolysis of NiL2(Ph)(2)(.)xH(2)O, synthesizing the poly(di- or monochlorophenylene oxide)s via free radical mechanism. The simultaneous polymerization of non-conducting polymer and conducting polymer (the conductivity of 0.7 S cm(-2)) were achieved by electroinitiated polymerization of Ni(DMPz)(2)(TCP)(2). The structural analysis of the polymers were performed using FTIR, H-1 NMR and C-13 NMR spectroscopic techniques and DSC for the thermal analysis. The kinetics of the polymerization was followed by in situ UV-vis spectrophotometer during the electrolysis. The low temperature ESR spectrum of the electrolysis solution also confirmed the formation of phenol radical (g=2.0028). One electron oxidation process of NiL2(DCP)(2)(.)xH(2)O produces a new Ni(II) complex, Ni(L-L)(DCP)(2)(S) by the rapid decomposition of (NiL2)-L-III(DCP)(2) into a ligand radical producing a singlet with the g value of 2.0015. Second electron oxidation process generates oligemers, which could not be isolated from the electrolyte solution. (c) 2005 Elsevier Ltd. All rights reserved.
