5 results
Search Results
Now showing 1 - 5 of 5
Article Citation - WoS: 3Citation - Scopus: 3Analysis of the Junction Properties of C/Gase0.5< Back-To Schottky-Type Photodetectors(Ieee-inst Electrical Electronics Engineers inc, 2015) Khanfar, Hazem K.; Qasrawi, Atef F.; Gasanly, Nizami M.In this paper, a C/GaSe0.5S0.5/C metal-semiconductor-metal photodetector is suggested and described. The device is explored by means of current-voltage and capacitance-voltage (C-V) characteristics under different photoexcitation intensities. It was observed that the design of the back-to-back Schottky device has reduced the dark current of the normal Ag/GaSe0.5S0.5/C Schottky diode by 13 times and increased the photosensitivity from 3.8 to similar to 2.1x10(3). The device exhibited a barrier height of 0.842 eV in the dark. The barrier height is reduced via photoexcitation. In addition, the C/GaSe0.5S0.5/C device exhibited an ON/OFF switching property from low injection OFF to high injection ON at specific biasing voltages. This voltage decreased with the increasing illumination intensity. On the other hand, the C-V characteristics of the device, which was recorded for an ac input signal with 100 MHz at different levels of photoexcitation shifted up when the intensity of light was increased. When the same measurement was repeated at signal frequency of 1.6 GHz, the C-V characteristics reflected a different level of capacitance response. These features of C/GaSe0.5S0.5/C photodetectors nominate the device to be used as multipurpose optical switches being suitable to store different levels of electromagnetic energy at microwave frequencies.Article Citation - WoS: 11Citation - Scopus: 11Design and Applications of Al/Inse Hybrid Device(Ieee-inst Electrical Electronics Engineers inc, 2015) Qasrawi, Atef F.; Khanfar, Hazem K.In this paper, a hybrid device made of Ag/BN Schottky barrier and anisotype InSe/BN heterojunction is designed and characterized. The design of the energy band diagram of the device revealed a valance band splitting at the InSe/BN interface and a barrier height at the Ag/BN junction of 3.04 and 6.49 eV, respectively. These parameters which were designed to force current conduction by tunneling were experimentally confirmed by the dark I-V characteristics which revealed an electric field assisted tunneling process. The hybrid device exhibited high/low current switching property at Vs = 2.60 V when forward biased. When the device was exposed to 850-nm lasers light, Vs regularly increased with increasing light power indicating the applicability of these devices as IR photodetectors. In addition, when it was used as capacitor and depleted with signal of frequency of 0.1 GHz and varying amplitude it showed good energy storing property with a quality factor of similar to 200. On the other hand, when the hybrid device was used as microwave resonator it behaves like bandstop filter that blocks signals of various notch frequencies in the range of 1.58-2.30 GHz. The features of the device are promising as they indicate the applicability of the Al/InSe/BN/Ag in communication technology.Article Citation - WoS: 21Citation - Scopus: 21Design and Applications of Yb/Ga2< Schottky Barriers(Ieee-inst Electrical Electronics Engineers inc, 2017) Khanfar, Hazem K.; Qasrawı, Atef Fayez Hasan; Qasrawi, Atef F.; Zakarneh, Yasmeen A.; Gasanly, N. M.; Qasrawı, Atef Fayez Hasan; Department of Electrical & Electronics Engineering; Department of Electrical & Electronics EngineeringIn this paper, the Ga2Se3 crystals are used to design a Yb/Ga2Se3/C Schottky barrier. The device structure is investigated by the X-ray diffraction technique, which reveals a monoclinic-face-centered cubic interfacing type of structure. The barrier is studied by means of current (I)-voltage (V) characteristics in the dark and under light through photoexcitation from tungsten lamp and from the He-Ne laser. In addition, the impedance spectroscopy of these devices is studied in the frequency range of 10-1400 MHz. The photoexcited I-V curve analysis allowed investigating the biasing voltage, illumination power, and energy effects on the diode physical parameters, which are presented by the rectification ratio, the Schottky barrier height, the ideality factor, the series resistance, the photosensitivity, the responsivity, and the external quantum efficiency (EQE). While a maximum photosensitivity of 42 was observed for laser excitation with a wavelength of 632 nm at a reverse bias of 4.4 V, the EQE reached value of 1652% at 19.0 V. On the other hand, the ac current conduction analysis of the electrical conductivity, which was determined from the impedance spectral analysis, indicated that the ac signal processing through the Yb/Ga2Se3/C samples is due to the correlated hopping conduction through localized states of Fermi density of 3.98 x 10(19) eV(-1) cm(-3). The high-and biasing-dependent EQE% nominates the Yb/Ga2Se3/C as a tunable optoelectronic device.Article Citation - WoS: 2Citation - Scopus: 2Mgo/Gase0.5< Heterojunction as Photodiodes and Microwave Resonators(Ieee-inst Electrical Electronics Engineers inc, 2016) Qasrawi, Atef F.; Khanfar, Hazem K.; Gasanly, N. M.In this paper, a multifunctional operating optoelectronic device that suits visible light (VLC) and microwave communication systems is designed and characterized. The device which is composed of p-type MgO and n-type GaSe0.5S0.5 heterojunction is characterized by means of optical absorbance in the incident light energy (E) region of 3.5-1.1 eV, dark and illuminated current (I)-voltage (V) characteristics, and impedance spectra in the frequency range of 1M-1.8 GHz. Four types of lasers which generate light of wavelengths 406, 632, 850, and 1550 nm are used to excite the active region of the device. The device was also illuminated by non-monochromatic light. The incident light power was varied in the range of 1.12-10.17 mu W. It was observed that the heterojunction exhibits an optical energy bandgap (E-g) of 1.85 eV. For laser excitation with E > Eg, the photosensitivity (S) exceeds 67 while it is less than unity for excitations with E < Eg. These behaviors are assigned to the intrinsic and extrinsic nature of absorption, respectively. In addition, S increases as a result of energy barrier height lowering with increasing light power. On the other hand, when the device was excited with ac signal, the capacitance and impedance of the device displayed a resonance-antiresonance property associated with negative differential resistance and very high signal quality factor (10(3)) above 1.37 GHz. The bandwidth of the two resonance-antiresonance peaks is 319 and 12.6 MHz at 1.475 and 1.649 GHz, respectively. These results are attractive for using the heterojunction in VLC and microwave communication technologies.Article Citation - WoS: 16Al/Moo3< Broken Gap Tunneling Hybrid Devices Design for Ir Laser Sensing and Microwave Filtering(Ieee-inst Electrical Electronics Engineers inc, 2020) Qasrawi, Atef F.; Khanfar, Hazem K.Herein the design of broken gap heterojunction devices made of molybdenum trioxide and zinc phthalocyanine coated onto Al substrates are reported. The devices which are prepared by the thermal evaporation technique under vacuum pressure of 10(-5) mbar are observed to exhibit a conduction and valence band offsets of 3.36 and 3.56 eV, respectively. The heterojunction devices are observed to form a subband gap of 0.66 eV between the valence bands edges of p- ZnPc and conduction bands edges of p-MoO3 leading to a p(+)/n(+) heterojunction type. Analysis of the current-voltage characteristics of the devices has shown that it exhibits tunneling diode characteristics with maximum tunneling barriers of width of similar to 45 nm. The device displayed biasing dependent photosensitivity in response to 850 nm laser lights. In addition to its characteristics as MOS device, when it was imposed with ac signals in the frequency domain of 0.01-1.80 GHz, it displayed resonance-antiresonancephenomena accompanied with negative capacitance effect in the studied range of spectra. The analysis of the alternating current (ac) electrical conductivity has shown that the ac conduction is mostly governed by quantum mechanical tunneling assisted with correlated barriers hopping. The laser light photosensitivity, the negative capacitance effect, the capacitance switching within 100 ns and the bandpass characteristics with notch frequency of 1.24 GHz make the Al/MoO3/ZnPc/Al attractive for use as IR sensors, parasitic capacitance cancellers, fast capacitance switches and microwave bandpass filters.
