37 results
Search Results
Now showing 1 - 10 of 37
Article Citation - WoS: 30Citation - Scopus: 35A Wavelet-Based Feature Set for Recognizing Pulse Repetition Interval Modulation Patterns(Tubitak Scientific & Technological Research Council Turkey, 2016) Gencol, Kenan; At, Nuray; Kara, AliThis paper presents a new feature set for the problem of recognizing pulse repetition interval (PRI) modulation patterns. The recognition is based upon the features extracted from the multiresolution decomposition of different types of PRI modulated sequences. Special emphasis is placed on the recognition of jittered and stagger type PRI sequences due to the fact that these types of PRI sequences appear predominantly in modern electronic warfare environments for some specific mission requirements and recognition of them is heavily based on histogram features. We test our method with a broad range of PRI modulation parameters. Simulation results show that the proposed feature set is highly robust and separates jittered, stagger, and other modulation patterns very well. Especially for the stagger type of PRI sequences, wavelet-based features outperform conventional histogram-based features. Advantages of the proposed feature set along with its robustness criteria are analyzed in detail.Article Citation - WoS: 17Citation - Scopus: 31Deep Learning-Based Vehicle Classification for Low Quality Images(Mdpi, 2022) Tas, Sumeyra; Sari, Ozgen; Dalveren, Yaser; Pazar, Senol; Kara, Ali; Derawi, MohammadThis study proposes a simple convolutional neural network (CNN)-based model for vehicle classification in low resolution surveillance images collected by a standard security camera installed distant from a traffic scene. In order to evaluate its effectiveness, the proposed model is tested on a new dataset containing tiny (100 x 100 pixels) and low resolution (96 dpi) vehicle images. The proposed model is then compared with well-known VGG16-based CNN models in terms of accuracy and complexity. Results indicate that although the well-known models provide higher accuracy, the proposed method offers an acceptable accuracy (92.9%) as well as a simple and lightweight solution for vehicle classification in low quality images. Thus, it is believed that this study might provide useful perception and understanding for further research on the use of standard low-cost cameras to enhance the ability of the intelligent systems such as intelligent transportation system applications.Article Citation - WoS: 5Citation - Scopus: 7On the Classification of Modulation Schemes Using Higher Order Statistics and Support Vector Machines(Springer, 2022) Coruk, Remziye Busra; Gokdogan, Bengisu Yalcinkaya; Benzaghta, Mohamed; Kara, AliThe recognition of modulation schemes in military and civilian applications is a major task for intelligent receiving systems. Various Automatic Modulation Classification (AMC) algorithms have been developed for this purpose in the literature. However, classification with low computational complexity as well as reasonable processing time is still a challenge. In this paper, a feature-based approach along with various classifiers is employed based on statistical features as well as higher-order moments and cumulants. An over-the-air (OTA) recorded dataset consisting of four analog and ten digital modulation schemes are used for testing the proposed method at 0-20 dB SNR. The overall accuracy for quadratic Support Vector Machine (SVM) is found to be as high as 98% at 10 dB. The comparison of the results with other AMC papers published in the literature indicates that the proposed method present higher accuracy, especially for realistic channel induced OTA dataset.Article Quality of Service Assessment: a Case Study on Performance Benchmarking of Cellular Network Operators in Turkey(2015) Kadıoğlu, Rana; Dalveren, Yaser; Kara, AliAbstract: This paper presents findings on performance benchmarking of cellular network operators in Turkey. Bench- marking is based on measurements of standard key performance indicators (KPIs) in one of the metropolitan cities of Turkey, Ankara. Performance benchmarking is formulated by incorporating customer perception by conducting surveys on how important KPIs are from the user s point of view. KPIs are measured, with standard test equipment, by drive test method on specified routes. According to the performance benchmarking results, the GSM and UMTS network operators achieving the best performance were determined in Ankara. Speech qualities of network operators, as the most popular service, were also evaluated by several statistical methods including pdf/cdf analysis and chi-square and Fisher s exact tests. The network operator providing the highest speech quality in Ankara was determined with the methods applied. Overall, the results and approaches on benchmarking of cellular networks in Turkey are reported for the first time in this paper. The approaches proposed in this paper could be adapted to wide-scale benchmarking of services in cellular networks.Article W-Band RCS Prediction of Small Objects: Comparing Two Widely Used Methods with Experimental Validation(Gazi University, 2025) Kara, Ali; Aydın, Elif; Yardım, Funda Ergün; Sezgin, DenizThis paper compares the accuracy of Shooting and Bouncing Rays and Electric Field Integral Equation methods for Radar Cross Section prediction of small objects at 77-81 GHz band. Existing studies on RCS prediction methods often lack comprehensive comparisons between computational and experimental results, particularly for small objects measured with a 77 GHz radar. This study addresses this gap by presenting an in-depth analysis of both simulation and measurement data. In this work, three targets with varying geometries and materials were measured with a frequency modulated continuous wave radar and simulated using Ansys HFSS and CST Studio Suite. The measurements were performed with a commercial off-the-shelf (COTS) frequency modulated continuous wave radar operating at 77–81 GHz. This study aims to emphasize the importance of considering both efficiency and accuracy when opting for an RCS prediction method. Overall, the outcomes of both methods have largely demonstrated good alignment. It has been noted that, while Shooting and Bouncing Rays method offers promising time-saving advantages, Electric Field Integral Equation method remains a valuable tool for complex geometries where precise results are crucial.Article Citation - WoS: 31Citation - Scopus: 40Variational Mode Decomposition-Based Radio Frequency Fingerprinting of Bluetooth Devices(Ieee-inst Electrical Electronics Engineers inc, 2019) Aghnaiya, Alghannai; Ali, Aysha M.; Kara, AliRadio frequency fingerprinting (RFF) is based on identification of unique features of RF transient signals emitted by radio devices. RF transient signals of radio devices are short in duration, non-stationary and nonlinear time series. This paper evaluates the performance of RF fingerprinting method based on variational mode decomposition (VMD). For this purpose, VMD is used to decompose Bluetooth (BT) transient signals into a series of band-limited modes, and then, the transient signal is reconstructed from the modes. Higher order statistical (HOS) features are extracted from the complex form of reconstructed transients. Then, Linear Support Vector Machine (LVM) classifier is used to identify BT devices. The method has been tested experimentally with BT devices of different brands, models and series. The classification performance shows that VMD based RF fingerprinting method achieves better performance (at least 8% higher) than time-frequency-energy (TFED) distribution based methods such as Hilbert-Huang Transform. This is demonstrated with the same dataset but with smaller number of features (nine features) and slightly lower (2-3 dB) SNR levels.Conference Object Citation - WoS: 17Citation - Scopus: 23Maintenance, Sustainability and Extendibility in Virtual and Remote Laboratories(Elsevier Science Bv, 2011) Kara, Ali; Ozbek, Mehmet Efe; Cagiltay, Nergiz Ercil; Aydin, ElifThis study presents discussions on sustainability of Virtual and Remote Laboratories (VRL), and provides challenges toward maintenance of VRLs. Technical and pedagogical issues in extension and sustenance of VRLs are discussed with the experiences of the authors gained in the development of a VRL system, European Remote Radio Laboratory (ERRL) platform. Moreover, the study presents actions to be taken in sustenance plan and expendability of VRL system with the advances in Information and Communication Technologies (ICT) and educational technologies along with the needs of educators and learners in formal education. (C) 2011 Published by Elsevier Ltd.Article Citation - WoS: 3Citation - Scopus: 4Modelling and Design of Pre-Equalizers for a Fully Operational Visible Light Communication System(Mdpi, 2023) Bostanoglu, Murat; Dalveren, Yaser; Catak, Ferhat Ozgur; Kara, AliNowadays, Visible Light Communication (VLC) has gained much attention due to the significant advancements in Light Emitting Diode (LED) technology. However, the bandwidth of LEDs is one of the important concerns that limits the transmission rates in a VLC system. In order to eliminate this limitation, various types of equalization methods are employed. Among these, using digital pre-equalizers can be a good choice because of their simple and reusable structure. Therefore, several digital pre-equalizer methods have been proposed for VLC systems in the literature. Yet, there is no study in the literature that examines the implementation of digital pre-equalizers in a realistic VLC system based on the IEEE 802.15.13 standard. Hence, the purpose of this study is to propose digital pre-equalizers for VLC systems based on the IEEE 802.15.13 standard. For this purpose, firstly, a realistic channel model is built by collecting the signal recordings from a real 802.15.13-compliant VLC system. Then, the channel model is integrated into a VLC system modeled in MATLAB. This is followed by the design of two different digital pre-equalizers. Next, simulations are conducted to evaluate their feasibility in terms of the system's BER performance under bandwidth-efficient modulation schemes, such as 64-QAM and 256-QAM. Results show that, although the second pre-equalizer provides lower BERs, its design and implementation might be costly. Nevertheless, the first design can be selected as a low-cost alternative to be used in the VLC system.Article Citation - WoS: 29Citation - Scopus: 33On the Performance of Variational Mode Decomposition-Based Radio Frequency Fingerprinting of Bluetooth Devices(Mdpi, 2020) Aghnaiya, Alghannai; Dalveren, Yaser; Kara, AliRadio frequency fingerprinting (RFF) is one of the communication network's security techniques based on the identification of the unique features of RF transient signals. However, extracting these features could be burdensome, due to the nonstationary nature of transient signals. This may then adversely affect the accuracy of the identification of devices. Recently, it has been shown that the use of variational mode decomposition (VMD) in extracting features from Bluetooth (BT) transient signals offers an efficient way to improve the classification accuracy. To do this, VMD has been used to decompose transient signals into a series of band-limited modes, and higher order statistical (HOS) features are extracted from reconstructed transient signals. In this study, the performance bounds of VMD in RFF implementation are scrutinized. Firstly, HOS features are extracted from the band-limited modes, and then from the reconstructed transient signals directly. Performance comparison due to both HOS feature sets is presented. Moreover, the lower SNR bound within which the VMD can achieve acceptable accuracy in the classification of BT devices is determined. The approach has been tested experimentally with BT devices by employing a Linear Support Vector Machine (LSVM) classifier. According to the classification results, a higher classification performance is achieved (similar to 4% higher) at lower SNR levels (-5-5 dB) when HOS features are extracted from band-limited modes in the implementation of VMD in RFF of BT devices.Article Citation - WoS: 5Citation - Scopus: 10Quality of Service Assessment: a Case Study on Performance Benchmarking of Cellular Network Operators in Turkey(Tubitak Scientific & Technological Research Council Turkey, 2015) Kadioglu, Rana; Dalveren, Yaser; Dalveren, Yaser; Kara, Ali; Kara, Ali; Dalveren, Yaser; Kara, Ali; Department of Electrical & Electronics Engineering; Department of Electrical & Electronics EngineeringThis paper presents findings on performance benchmarking of cellular network operators in Turkey. Benchmarking is based on measurements of standard key performance indicators (KPIs) in one of the metropolitan cities of Turkey, Ankara. Performance benchmarking is formulated by incorporating customer perception by conducting surveys on how important KPIs are from the user's point of view. KPIs are measured, with standard test equipment, by drive test method on specified routes. According to the performance benchmarking results, the GSM and UMTS network operators achieving the best performance were determined in Ankara. Speech qualities of network operators, as the most popular service, were also evaluated by several statistical methods including pdf/cdf analysis and chi-square and Fisher's exact tests. The network operator providing the highest speech quality in Ankara was determined with the methods applied. Overall, the results and approaches on benchmarking of cellular networks in Turkey are reported for the first time in this paper. The approaches proposed in this paper could be adapted to wide-scale benchmarking of services in cellular networks.
