5 results
Search Results
Now showing 1 - 5 of 5
Article Citation - WoS: 18Citation - Scopus: 18Synthesis and Characterization of Antibacterial Drug Loaded Β-Tricalcium Phosphate Powders for Bone Engineering Applications(Springer, 2020) Topsakal, Aysenur; Ekren, Nazmi; Kilic, Osman; Oktar, Faik N.; Mahirogullari, Mahir; Ozkan, Ozan; Gunduz, OguzhanPowders of beta-tricalcium phosphate [beta-TCP, beta-Ca-3(PO4)(2)] and composite powders of beta-TCP and polyvinyl alcohol (PVA) were synthesized by using wet precipitation methods. First, the conditions for the preparation of single phase beta-TCP have been delineated. In the co-precipitation procedure, calcium nitrate and diammonium hydrogen phosphate were used as calcium and phosphorous precursors, respectively. The pH of the system was varied in the range 7-11 by adding designed amounts of ammonia solution. The filtered cakes were desiccated at 80 degrees C and subsequently calcined at different temperatures in the range between 700-1100 degrees C. Later on, rifampicin form II was used to produce drug-loaded beta-TCP and PVA/beta-TCP powders. All the synthesized materials have been characterized from morphological (by scanning electron microscopy) and structural-chemical (by X-ray diffraction and Fourier transform infrared spectroscopy) point of view. The drug loading capacity of the selected pure beta-TCP powder has been assessed. The biological performance (cytocompatibility in fibroblast cell culture and antibacterial efficacy against Escherichia coli and Staphylococcus aureus) has been tested with promising results. Application perspectives of the designed drug-bioceramic-polymer blends are advanced and discussed. [GRAPHICS] .Article Citation - WoS: 19Citation - Scopus: 20Fucoidan-Loaded Electrospun Polyvinyl-alcohol/Chitosan Nanofibers With Enhanced Antibacterial Activity for Skin Tissue Engineering(Elsevier, 2023) Puigmal, Arnau Cuesta; Ayran, Musa; Ulag, Songul; Altan, Eray; Guncu, Mehmet Mucahit; Aksu, Burak; Gunduz, OguzhanThe polymeric nanofiber may interact and control certain regeneration processes at the molecular level to repair damaged tissues. This research focuses on the development of characterization and antibacterial capabilities of polyvinyl alcohol (PVA)/chitosan (CS) nanofibres containing fucoidan (FUC) for tissue engineering as a skin tissue substitute. A control group consisting of 13% PVA/(0.1)% CS nanofiber was prepared. To confer anti-bacterial properties to the nanofiber, 10, 20, and 30 mg of FUC were incorporated into this control group. The scanning electron microscope (SEM) proved the homogeneous and beadless structures of the nanofibers. The antibacterial activity of the 13% PVA/(0.1)% CS/(10, 20, 30) FUC was tested against the S.aureus and E.coli and the results showed that with FUC addition, the antibacterial activities of the nanofibers increased. The biocompatibility test was performed with a fibroblast cell line for 1, 3, and 7 days of incubation and the results demonstrated that FUC addition enhanced the bioactivity of the 13% PVA/(0.1)% CS nanofibers. In addition, the biocompatibility results showed that 13% PVA/(0.1)% CS/10 FUC had the highest viability value for all incubation periods compared to the others. In addition, the tensile test results showed that; the maximum tensile strength value was observed for 13% PVA/(0.1)% CS/10 FUC nanofibers.Article Citation - WoS: 126Citation - Scopus: 156Development of satureja Cuneifolia-loaded< Sodium Alginate/Polyethylene Glycol Scaffolds Produced by 3d-Printing Technology as a Diabetic Wound Dressing Material(Elsevier, 2020) Ilhan, Elif; Cesur, Sumeyye; Guler, Ece; Topal, Fadime; Albayrak, Deniz; Guncu, Mehmet Mucahit; Gunduz, OguzhanAcute wounds are a common health problem, with millions of people affected and decreased granulation tissue formation and vascularization, it is also a big challenge for wound care researchers to promote acute wound healing around the globe. This study aims to produce and characterize Satureja cuneifolia plant extract (SC) blended with sodium alginate (SA) /polyethylene glycol (PEG) scaffolds for the potential treatment of diabetic ulcer. SA/PEG scaffolds were prepared by adding different concentrations (1, 3, and 5 wt%) of PEG to 9 wt% SA. The morphological and chemical composition of the resulting 3D printed composite scaffolds was determined using scanning electron microscopy (SEM) and Fourier transforms infrared spectroscopy (FTIR), respectively. Mechanical and thermal properties, swelling, and degradation behaviours were also investigated. The release kinetics of SC were performed. The antimicrobial analysis was evaluated against Escherichia coli and Staphylococcus aureus strains. 3D printed scaffolds have shown an excellent antibacterial effect, especially against gram-positive bacteria due to the antibacterial SC extract they contain. Furthermore, the cell viability of fibroblast (L929) cells on/within scaffolds were determined by the colourimetric MTT assay. The SA/PEG/SC scaffolds show a great promising potential candidate for diabetic wound healing and against bacterial infections. (c) 2020 Elsevier B.V. All rights reserved.Article Citation - WoS: 24Citation - Scopus: 28Development of Amoxicillin-Loaded Electrospun Polyurethane/Chitosan Β-Tricalcium Phosphate Scaffold for Bone Tissue Regeneration(Ieee-inst Electrical Electronics Engineers inc, 2018) Topsakal, Aysenur; Uzun, Muhammet; Ugar, Gaye; Ozcan, Aslihan; Altun, Esra; Oktar, Faik Nuzhet; Gunduz, OguzhanBiocompatible nanocomposite electrospun fibers containing Polyurethane/Chitosan/beta-Tri calcium phosphate with diverse concentrations were designed and produced through the electrospinning process for bone tissue engineering applications. After the production process, density measurement, viscosity, electrical conductivity, and tensile strength measurement tests were carried out as physical analyses of blended solutions. The chemical structural characterization was scrutinized using Fourier transform infrared spectrometer (FTIR), and scanning electron microscopy (SEM) was used to observe the morphological details of developed electrospun scaffolds. Cell viability, attachment, and proliferation were performed using a L929 fibroblast cell line. Based on the physical, SEM, FTIR analysis, and cell culture studies, preferable nanofiber composition was selected for further studies. Amoxicillin (AMX) was loaded to that selected nanofiber composition for examination of the drug release. In comparison with other studies on similar AMX controlled products, higher drug loading and encapsulation efficiencies were obtained. It has been clearly found that the developed nanofiber composites have potential for bone tissue engineering applications.Editorial Editorial: Biofabricated Materials for Tissue Engineering(Frontiers Media Sa, 2024) Sasmazel, Hilal Turkoglu; Gunduz, Oguzhan; Ramalingam, Murugan; Ulag, Songul; Turkoglu Sasmazel, Hilal[No Abstract Available]
