4 results
Search Results
Now showing 1 - 4 of 4
Article Citation - WoS: 13Citation - Scopus: 13Comparison of Physicochemical Properties of Two Types of Polyepichlorohydrin-Based Anion Exchange Membranes for Reverse Electrodialysis(Mdpi, 2022) Karakoc, Ezgi; Guler, EnverThe development of the most effective, suitable and economic ion-exchange membranes is crucial for reverse electrodialysis (RED)-the most widely studied process to harvest salinity gradient energy from mixing seawater and river water. RED utilizes two types of membranes as core elements, namely cation exchange membranes (CEM) and anion exchange membranes (AEM). Since the preparation of AEMs is more complex compared to CEMs, the design and development of anion exchange membranes have been the focus in this study. Homogeneous AEMs based on two types of polyepichlorohydrin (PECH) with different chlorine amounts (PECH-H, 37 wt% and PECH-C, 25 wt%) were synthesized, and first-time benchmarking of the membrane properties was conducted. In addition to physicochemical membrane properties, some instrumental analyses such as SEM, FTIR and DSC were investigated to characterize these anion-exchange membranes. Based on the results, although the PECH-H-type membrane had enhanced ion-exchange properties, PECH-C-based anion-exchange membranes exhibited a higher power density of 0.316 W/m(2) in a lab-scale RED system. Evidently, there is room for the development of new types of PECH-C-based AEMs with great potential for energy generation in the RED process.Article Citation - WoS: 9Citation - Scopus: 9Effect of Co-Existing Ions on Salinity Gradient Power Generation by Reverse Electrodialysis Using Different Ion Exchange Membrane Pairs(Mdpi, 2022) Kaya, Tugce Zeynep; Altiok, Esra; Guler, Enver; Kabay, NalanThis study investigates the influence of co-existing ions on the salinity gradient power generation performance of the reverse electrodialysis (RED) using three different commercial ion exchange membrane pairs. The feed solutions, including the mixture of two different salts, were prepared with 90 wt.% of NaCl and 10 wt.% of LiCl, KCl, CaCl2, MgCl2 or Na2SO4 by keeping the salt ratio between high concentrate solution and low concentrate solution constant as 1:30 (g/g) at various flow velocities (50, 125 and 200 mL/min). It was observed that the divalent ions exhibited a negative impact on the performance of the RED system due to their high valence and low ionic mobility depending on their high hydrated radius and low diffusion coefficients compared to those of the monovalent ions. On the other hand, the effect of the monovalent ions differed according to the properties of ion exchange membranes used in the RED stack. When the power generation performances of ion exchange membrane pairs employed in the RED stack were compared, it was considered that Neosepta AMX and CMX membranes provided the highest power density due to their low membrane thicknesses, low electrical resistances, and relatively high ion exchange capacities compared to other two commercial ion exchange membrane pairs.Article Citation - WoS: 4Citation - Scopus: 4Further Development of Polyepichlorohydrin Based Anion Exchange Membranes for Reverse Electrodialysis by Tuning Cast Solution Properties(Mdpi, 2022) Eti, Mine; Cihanoglu, Aydin; Guler, Enver; Gomez-Coma, Lucia; Altiok, Esra; Arda, Muserref; Kabay, NalanRecently, there have been several studies done regarding anion exchange membranes (AEMs) based on polyepichlorohydrin (PECH), an attractive polymer enabling safe membrane fabrication due to its inherent chloromethyl groups. However, there are still undiscovered properties of these membranes emerging from different compositions of cast solutions. Thus, it is vital to explore new membrane properties for sustainable energy generation by reverse electrodialysis (RED). In this study, the cast solution composition was easily tuned by varying the ratio of active polymer (i.e., blend ratio) and quaternary agent (i.e., excess diamine ratio) in the range of 1.07-2.00, and 1.00-4.00, respectively. The membrane synthesized with excess diamine ratio of 4.00 and blend ratio of 1.07 provided the best results in terms of ion exchange capacity, 3.47 mmol/g, with satisfactory conductive properties (area resistance: 2.4 omega center dot cm(2), electrical conductivity: 6.44 mS/cm) and high hydrophilicity. RED tests were performed by AEMs coupled with the commercially available Neosepta CMX cation exchange membrane (CEMs).Article Citation - WoS: 19Citation - Scopus: 21Performance of Reverse Electrodialysis System for Salinity Gradient Energy Generation by Using a Commercial Ion Exchange Membrane Pair With Homogeneous Bulk Structure(Mdpi, 2021) Altiok, Esra; Kaya, Tugce Zeynep; Guler, Enver; Kabay, Nalan; Bryjak, MarekSalinity gradient energy is a prominent alternative and maintainable energy source, which has considerable potential. Reverse electrodialysis (RED) is one of the most widely studied methods to extract this energy. Despite the considerable progress in research, optimization of RED process is still ongoing. In this study, effects of the number of membrane pairs, ratio of salinity gradient and feed velocity on power generation via the reverse electrodialysis (RED) system were investigated by using Fujifilm cation exchange membrane (CEM Type 2) and FujiFilm anion exchange membrane (AEM Type 2) ion exchange membranes. In the literature, there is no previous study based on a RED system equipped with Fujifilm AEM Type II and CEM Type II membranes that have homogeneous bulk structure. Using 400 mu m of intermembrane distance, maximum obtainable power density by 5 pairs of Fujifilm membranes at 1:45 salinity ratio and with a linear flow rate of 0.833 cm/s was 0.426 W/m(2).
