4 results
Search Results
Now showing 1 - 4 of 4
Article Citation - WoS: 8Citation - Scopus: 8Improvement of Optical Properties and Redox Stability of Poly(3,4-Ethylenedioxythiophene)(Elsevier Sci Ltd, 2018) Ertan, Salih; Cihaner, AtillaIn order to improve the optical properties and redox stability of poly(3,4-ethylenedioxythiophene) (PEDOT) without changing its electrochemical and electrochromic behaviour, it was supported with alkyl-substituted polyhedral oligomeric silsesquioxane (POSS) cage. The corresponding copolymers were obtained electrochemically via potentiostatic or potentiodynamic methods and compared to the parent homopolymers. Electrochemical polymerization of EDOT and POSS containing EDOT called EDOT-POSS in various monomer feed ratios was performed in an electrolyte solution of 0.1 M TBAPF(6) dissolved in a mixture of dichloromethane and acetonitrile (1/3: v/v). Just as PEDOT, the copolymers represented the similar band gap (1.61 eV), redox and electrochromic behaviors. On the other hand, when compared to the parent PEDOT, the presence of POSS cages in the copolymer backbone improved the redox stability and optical properties of PEDOT such as higher percent transmittance change (65% at 621 nm), higher transparency at oxidized state, lower switching time (similar to 1.0 s) and higher coloration efficiency (463 cm(2)/C for 95% switching) as well as higher electrochemical stability (86% of its electroactivity retains after 1750 cycles under ambient conditions).Article Citation - WoS: 11Citation - Scopus: 11Electrochemical and Optical Properties of Substituted Phthalimide Based Monomers and Electrochemical Polymerization of 3,4-Ethylenedioxythiophene Oligomeric Silsesquioxane (poss) Analogue(Elsevier Sci Ltd, 2019) Cakal, Deniz; Ertan, Salih; Cihaner, Atilla; Onal, Ahmet M.A new series of donor-acceptor-donor type trimeric monomers bearing substituted phthalimide units as acceptor units and thiophene and 3,4-ethylenedioxythiophene (EDOT) as donor units was synthesized and characterized. The strength of acceptor units and intramolecular charge transfer between donor and acceptor units were investigated by using electrochemical and optical methods. The main advantage of phthalimide unit over other acceptor units is the ease of its functionalizability. Thus, utilizing this property, a phthalimide derivative (E2P-POSS) bearing polyhedral oligomeric silsesquioxane (POSS) cage was introduced successfully with EDOT and polymerized electrochemically. The corresponding electroactive polymer, PE2P-POSS, has a band gap of 1.72 eV and is an electrochromic polymer: gray when neutralized and eggplant purple when oxidized.Article Citation - WoS: 3Citation - Scopus: 2Polyhedral Oligomeric Silsesquioxane Cage Integrated Soluble and Fluorescent Poly(3,4-Propylenedioxythiophene) Dye(Elsevier Sci Ltd, 2021) Ertan, Salih; Kaya, Murat; Cihaner, AtillaA new analog of poly (3,4-propylenedioxythiophene) conjugated polymers called PProDOT-POSS, where polyhedral oligomeric silsesquioxane (POSS) nanocage with alkyl substitutions was integrated on the bridge of 3,4-propylenedioxythiophene unit and its structure was confirmed by spectroscopic techniques, was reported. The polymers were synthesized via both chemical and electrochemical polymerization techniques. While chemical polymerization was carried out in the presence of anhydrous FeCl3 as an oxidant, a solution of 0.1 M tetrabutylammonium hexafluoride electrolyte dissolved in a mixture of dichloromethane and acetonitrile (1/3: v/v) was used as an electrolyte solution for electrochemical polymerization. Electro-optical properties of the corresponding polymers were characterized by using electroanalytical techniques such as cyclic voltammetry and square wave potentiometry, and spectrophotometric methods like ultraviolet-visible and fluorescent spectrophotometry. Corresponding polymers obtained both electrochemically and chemically are soluble completely in common organic solvents such as chloroform, toluene, dichloromethane, tetrahydrofuran, etc. Polymer samples both in film and solution forms can be doped/dedoped reversibly by using a chemical oxidant or an external potential. The optical bandgap of the neutral polymer film with a maximum absorption band at 555 nm was calculated as 1.95 eV. Polymers have fluorescent property and excited polymers represented a red/orange light with an emission band centered at 605 nm in toluene. Also, PProDOT-POSS polymers have electrochromic properties under external potentials and they have an optical contrast of 55% at 555 nm between their neutral and oxidized states. Upon oxidation, they showed high transparency and they can switch between redox states in a short time (switching time = similar to 1.0 s) as well as high coloration efficiency (502 cm(2)/C for 95% switching). It can be concluded that POSS based PProDOT polymers can be good candidates for optoelectronic and bioelectronics applications. Short Abstract for Paper Submission: A new analog of poly (3,4-propylenedioxythiophene) conjugated polymers called PProDOT-POSS, was reported with the integrated of alkyl-substituted polyhedral oligomeric silsesquioxane nanocage structure. The polymers were synthesized via both chemical and electrochemical polymerization techniques. Corresponding polymers obtained both electrochemically and chemically are soluble completely in common organic solvents such as chloroform, toluene, dichloromethane, tetrahydrofuran, etc. Polymer samples both in film and solution forms can be doped/dedoped reversibly by using a chemical oxidant or an external potential. The optical bandgap of the neutral polymer film with a maximum absorption band at 555 nm was calculated as 1.95 eV. Polymers have fluorescent property and excited polymers represented a red/orange light with an emission band centered at 605 nm in toluene.Article Citation - WoS: 12Citation - Scopus: 14A Platform To Synthesize a Soluble Poly(3,4-Ethylenedioxythiophene) Analogue(Wiley, 2017) Ertan, Salih; Kaynak, Cevdet; Cihaner, AtillaAlkyl-substituted polyhedral oligomeric silsesquioxane (POSS) cage is combined with 3,4-ethylenedioxythiophene under the same roof. The corresponding monomer called EDOT-POSS is used to get soluble poly(3,4-ethylenedioxythiophene) (PEDOT-POSS) analogue. Both chemically and electrochemically obtained polymers are soluble in common organic solvents like dichloromethane, chloroform, tetrahydrofuran, and so forth. The PEDOT-POSS has somewhat higher band gap (1.71 eV at 618 nm) than its parent PEDOT (1.60 eV at 627 nm) and as expected the PEDOT-POSS exhibits higher optical contrast (74% at 618 nm) and coloration efficiency (582 cm(2)/C for 100% switching), lower switching time (0.9 s), higher electrochemical stability (93% of its electroactivity retains after 5000 cycles under ambient conditions) when compared to the PEDOT. A number of advantages of the PEDOT-POSS over the PEDOT can make it a promising material in the areas of electro-optical applications. (C) 2017 Wiley Periodicals, Inc.

