2 results
Search Results
Now showing 1 - 2 of 2
Conference Object Citation - WoS: 134Citation - Scopus: 148Polybenzimidazole/Sio2< Hybrid Membranes for High Temperature Proton Exchange Membrane Fuel Cells(Pergamon-elsevier Science Ltd, 2016) Devrim, Yilser; Devrim, Huseyin; Eroglu, InciPolybenzimidazole/Silicon dioxide (PBI/SiO2) hybrid membranes were prepared and characterized as alternative materials for high temperature proton exchange membrane fuel cell (HT-PEMFC). The PBI/SiO2 membranes were cast from a PBI polymer synthesized in the laboratory and contained 5 wt. % SiO2 as inorganic filler. Scanning electron microscopy (SEM) analysis showed that the uniform and homogeneous distribution of SiO2 particles in the hybrid membrane. The existence SiO2 has improved the acid retention and proton conductivity properties. A maximum conductivity of 0.1027 S/cm at 180 degrees C was obtained for the PBI/SiO2 hybrid membrane. Gas diffusion electrodes (GDE) were fabricated by ultrasonic coating technique with 1 mg Pt/cm(2) catalyst loading for both anode and cathode. The membranes were tested in a single HT-PEMFC with a 5 cm(2) active area operating at the temperature range of 140 degrees C-180 degrees C. Single HT-PEMFC tests indicated that PBI/SiO2 hybrid membrane was more stable and also performed better than pristine PBI membrane. Maximum current density was observed for PBI/SiO2 membrane at 165 degrees C and cell voltage of 0.6 V as 0.24 A/cm(2). The results suggested that PBI/SiO2 hybrid membrane is promising electrolytes for HT-PEMFC with improved fuel cell performance. (C) 2016 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.Article Citation - WoS: 55Citation - Scopus: 63Development of 500 W Pem Fuel Cell Stack for Portable Power Generators(Pergamon-elsevier Science Ltd, 2015) Devrim, Yilser; Devrim, Huseyin; Eroglu, InciPolymer Electrolyte Membrane Fuel Cell (PEMFC) portable power generators are gaining importance in emergency applications. In this study, an air-cooled PEMFC stack was designed and fabricated for net 500 W power output. Gas Diffusion Electrodes (GDE's) were manufactured by ultrasonic spray coating technique. Stack design was based on electrochemical data obtained at 0.60 V was 0.5 A/cm(2) from performance tests of a single cell having the same membrane electrode assemblies (MEA) that had an active area of 100 cm(2). Graphite bipolar plates were designed and machined by serpentines type flow. The stack comprising of 24 cells was assembled with external fixing plates. The stack temperature was effectively regulated by the cooling fan based on on-off control system. A maximum power of 647 W was obtained from the stack. The PEMFC stack was stable during start-up and shutdown cycling testing for 7 days at 65 degrees C in H-2/air at a constant cell voltage. Copyright (c) 2015, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.
