96 results
Search Results
Now showing 1 - 10 of 96
Article Citation - WoS: 44Citation - Scopus: 45A Novel Electrochromic and Fluorescent Polythienylpyrrole Bearing 1,1′-Bipyrrole(Pergamon-elsevier Science Ltd, 2009) Cihaner, Atilla; Mert, Olcay; Demir, Ayhan S.A novel conducting polymer was successfully synthesized via electropolymerization of 1-(1H-pyrrol-1-yl)-2,5-di(thiophen-2-yl)-1H-pyrrole. The electrochemical and electro-optical properties of the corresponding polymer, which was the first example of polymer containing 1,1'-bipyrrole units, were elaborated using electroanalytical and spectroscopic techniques. Cyclic voltammograms and electro-optical studies showed that the polymer has a stable and well-defined reversible redox process as well as electrochromic behavior. The processable polymer film also possessed a yellowish orange light emitter property. (C) 2008 Elsevier Ltd. All rights reserved.Article Citation - WoS: 94Citation - Scopus: 95A New Conducting Polymer Bearing 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (bodipy) Subunit: Synthesis and Characterization(Pergamon-elsevier Science Ltd, 2008) Cihaner, Atilla; Algi, FatihA new monomer system based on thiophene, pyrrole and 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene dye (SNS-BODIPY) was synthesized and its corresponding polymer (PSNS-BODIPY) was obtained via repetitive cycling or constant potential electrolysis in 0.1 M tetrabutylammonium hexafluorophosphate dissolved in dichloromethane. The PSNS-BODIPY film has very stable and well-defined reversible redox couples during p-doping process. Multi-electrochromic polymer film has a band gap of 2.9 eV with two absorption bands in its neutral state at 351 and 525 nm, attributed to the polymer backbone and BODIPY subunits, respectively. The percentage transmittance changes between both states (neutral and oxidized) were found as 12.1% for 351 nm and 17.7% for 525 nm in the visible region as well as 46.2% for 1050 nm in the near-infrared region. Beyond the robustness, the PSNS-BODIPY film has high redox stability (retaining 53.3% of its electroactivity at 351 nm after 2000 switching) with a low response time of 1.0 s. (C) 2008 Elsevier Ltd. All rights reserved.Research Project Benzotellurodiazol Esaslı Yeni Anorganik-organik Melez Elektroaktif Monomerlerin Sentezi(2017) Cihaner, Atilla; Işık, Murat; Algı, FatihBu çalışmada benzotelluradiazol ve benzimidazol birim esaslı altı farklı elektron verici-alıcı- verici (V-A-V) monomerin sentezi, karakterizasyonu ve polimerizasyonu rapor edilmeye çalışılmıştır. Benzotelluradiazol esaslı V-A-V monomerleri başarı ile sentezlenememiş olsada benzimidazole esaslı V-A-V monomerleri başarılı bir biçimde sentezlenmiş, karakterize edilmiş ve elektrokimyasal olarak polimerleştirilmiştir. Benzotiyadiazol ve benzoselenadiazol türevleri gibi, tiyofen ve 3,4-alkilendioksitiyofen elektron verici birimleri ile birleştirilmiş benzimidazole birimleri içeren polimerler 1.50 eV ve 1.57 eV aralığında dar band aralığı değerlerine sahip olup dışarıdan uygulanan potensiyel altında elektrokromik özellikler göstermiştir. Diğer bir taraftan benzotelluradiazol türevleri için daha önceden literatürde rapor edilen sentez reçeteleri bu çalışmadaki benzotelluradiazol esaslı V-A-V monomerlerinin sentezinde çalışmamıştır. Malesef literatürde benzotiyadiazol veya benzoselenadiazol içerikli polimerlerin benzotelluradiazol içerikli polimerlerin dönüşümünde kullanılan sentez reçeteleri monomer ve oligomer sentezlerinde çalışmamıştır. Bunun yanında teorik çalışmalar benzotelluradiazol esaslı V-A-V tipi monomerlerin ve oligomerlerin oda sıcaklığında kararlı bileşikler olduğunu ve diğer elektron alıcı benzerleri ile karşılaştırıldığında daha düşük band aralıklı polimerler verebileceğini göstermiştir. Sonuç olarak benzotelluradiazol esaslı monomerler sentezleyebilmek için bilinen sentez reçetelerinin dışında yeni stratejilerin ve reçetelerin uygulanması gerekmektedir. Bu konu üzerindeki çalışmalar sürmektedir.Article Citation - WoS: 11Citation - Scopus: 12Ag Nanostructures on a Poly(3,4-Ethylenedioxythiophene) Film Prepared With Electrochemical Route: a Controllable Roughened Sers Substrate With High Repeatability and Stability(Pergamon-elsevier Science Ltd, 2012) Dogan, Uzeyir; Kaya, Murat; Cihaner, Atilla; Volkan, MurvetA simple, reliable and reproducible one-step electrochemical method for the preparation of surface-enhanced Raman-active polymer-mediated silver nanoparticles (Ag NPs) on planar indium tin oxide (ITO) coated glass substrates was reported. Poly(3,4-ethylenedioxythiophene) (PEDOT) film was used as a support material for dispersing nanostructured silver nanostructures on the surface homogeneously, since 3,4-ethylenedioxythiophene (EDOT) monomer polymerizes regioregularly. The optical properties and morphologies of the silver substrates have been investigated by ultraviolet-visible (UV-vis) spectroscopy and field emission scanning electron microscopy (FE-SEM). The UV-vis and FE-SEM results revealed that the Ag nanostructures separately appeared on the PEDOT coated ITO after reduction. The effect of the thickness of PEDOT polymer film, reduction potential of silver, the concentration of silver ion solution and the amount of silver particle on the polymer film on the SERS response were studied as well as repeatability and temporal stability of prepared substrates. Brilliant cresyl blue (BCB) has been used as Raman probes to evaluate the properties of the new SERS substrates. Signals collected over multiple spots within the same substrate resulted in a relative standard deviation (RSD) of 9.34%, while an RSD of 11.05% was measured in signals collected from different substrates. The SERS-active substrates were robust and stable which lost only 5.71% of initial intensity after 1 month. (C) 2012 Elsevier Ltd. All rights reserved.Article Citation - WoS: 7Citation - Scopus: 9Pyrrole Coupling Chemistry: Investigation of Electroanalytic, Spectroscopic and Thermal Properties of N-Substituted Poly(bis-Pyrrole) Films(Royal Soc Chemistry, 2013) Mert, Olcay; Demir, Ayhan S.; Cihaner, AtillaAn etheric member of N-linked polybispyrroles (PolybisPy) based on 1-(3-(2-(2-(3-(1H-pyrrol-1-yl)propoxy)ethoxy)ethoxy)propyl)-1H-pyrrole (1) was electrochemically synthesized for the versatile investigation of its exciting electrochromic and ion receptor properties. It has been fully characterized by electroanalytic, spectroscopic, thermal, and four-probe techniques. It was thereby found that P1 shows strong stability, and a reversible redox process as well as a good electrochromic material property; transparent yellow in the neutral state, light pink in the intermediate state, and blue in the oxidized state. Also, the corresponding polymer (P1) exhibited a selective voltammetric response towards Na+ among the alkali series in an organic medium. Moreover, P1 film was employed for the detection of Ag+ ions in the solution with cyclic voltammetry without precipitants or complexing ligands, and SEM images confirmed the deposition of metallic silver on the film surface. These prominent features also make P1 a good candidate for many practical uses, such as the recovery of metals and ion sensors.Article Citation - WoS: 21Citation - Scopus: 21Synthesis and Electro-Optical Properties of New Conjugated Hybrid Polymers Based on Furan and Fluorene Units(Pergamon-elsevier Science Ltd, 2013) Gunes, Arzu; Cihaner, Atilla; Onal, Ahmet M.A novel series of hybrid monomers containing furan and fluorene units, namely 2-(2-(furan-2-yl)-9H-fluoren-7-yl)furan (FFF), 2,7-di(furan-2-yl)-9H-fluoren-9-one (FOF) and 2-(2-(furan-2-yl)-9,9-dihexyl-9H-fluoren-7-yl)furan (FHF), was synthesized and their electrochemical polymerization was achieved via potential cycling. Optical and electrochemical properties of the polymers, poly(2-(2-(furan-2-yl)9H-fluoren-7-yl)furan (PFFF), poly(2,7-di(furan-2-yl)-9H-fluoren-9-one) (PFOF) and poly(2-(2-(furan2-yl)-9,9-dihexyl-9H-fluoren-7-yl)furan) (PFHF), were investigated and it was found that polymer films exhibited quasi-reversible redox behavior (E-p(ox) =0.92V for PFFF, E-p(ox) = 1.08V for PFOF and E-p(ox) = 0.99V for PFHF) accompanied with a reversible electrochromic behavior, yellow to dark blue for PFFF, orange to green for PFOF and orange to green for PFHF. Their band gap values (E-g) were found to be 2.49, 2.32 and 2.61 eV for PFFF, PFOF and PFHF, respectively. (C) 2012 Elsevier Ltd. All rights reserved.Article Citation - WoS: 1Citation - Scopus: 1Synthesis and Characterization of New Dithienosilole Based Copolymers(Electrochemical Soc inc, 2016) Karabay, Lutfiye Canan; Al-Jumaili, Mohammed; Cihaner, Atilla2-Ethylhexyl substituted dithienosilole based soluble polymers including thiophene (1) and bithiophene (2) units were synthesized via Stille coupling reaction. The presence of 2-ethylhexyl substituents on the silole ring gave solubility property to the polymers in common solvents. According to gel permeation chromatography measurements, the weight average molecular weights of the polymers 1 and 2 were found to be as 70,977 with a polydispersity index of 2.30 and 110,439 with a PDI of 1.42, respectively. Fluorescent polymers in toluene solution have maximum emisssion bands at 634 nm for the polymer 1 and 613 nm for the polymer 2. Chemical and electrochemical doping of the polymers in the solution and in the film forms were monitored by using ultraviolet-visible spectroscopic technique. The polymers exhibited chromic (chemochromic and electrochromic) properties. While the colors of the neutral polymer films are purple for the polymer 1 and reddish brown for the polymer 2, both polymers are transparent sky blue at their oxidized states. The bandgaps of polymers in film forms were calculated as 1.81 eV for the polymer 1 and 1.92 eV for the polymer 2. Also, electrochromic device applications of the polymers were done. Electrochemical and optical behaviors of the polymers demonstrated that they can be good candidates for optoelectronic applications. (C) 2016 The Electrochemical Society. All rights reserved.Article Citation - WoS: 28Citation - Scopus: 29Functionalized Polysulfide Copolymers With 4-Vinylpyridine Via Inverse Vulcanization(Elsevier Science Bv, 2019) Berk, Hasan; Balci, Burcu; Ertan, Salih; Kaya, Murat; Cihaner, AtillaA new series of functional polysulfide copolymers called poly(sulfur-random-4-vinylpyridine) (poly(S-r-4VP)) was synthesized via inverse vulcanization technique by ring opening polymerization of elemental sulfur in the presence of 4-vinylpyridine (4VP). The corresponding copolymers can be post functionalized by using amine group in 4VP unit to get polymers bearing various properties. Elemental sulfur was heated up to 160 degrees C and 4VP was added slowly to a clear yellowish orange colored liquid at this temperature. The reaction mixture was vitrified to form a reddish-brown polymeric material at 180 degrees C in 1 h. The products were characterized by using FTIR, NMR, and Raman spectroscopic techniques. Poly(S-r-4VP) copolymers are soluble in common solvents like dichloromethane, chloroform and tetrahydrofuran. Weight-average molecular weights of poly(S-r-4VP) copolymers with different wt% 4VP were measured by using gel permeation chromatography technique. The polysulfide copolymers with different wt% 4VP have high weight-average molecular weights with polydispersity indeces (PDI) in a range from 1.88 to 4.06 measured by gel permeation chromatography. Post functionalization of the copolymer with 50 wt% 4VP as an example was performed successfully by using alkyl bromide to get N-alkyl quaternized 4VP in polymer backbone.Article Citation - WoS: 52Citation - Scopus: 57Members of Cmy Color Space: Cyan and Magenta Colored Polymers Based on Oxadiazole Acceptor Unit(Amer Chemical Soc, 2012) Ozkut, Merve Icli; Algi, Melek Pamuk; Oztas, Zahide; Algi, Fatih; Onal, Ahmet M.; Cihaner, AtillaIn this study, three novel oxadiazole-based polymers were synthesized and their electrochemical and optical properties were investigated. The polymers were found to have both p- and n-type doping properties accompanied by electrochromic response. Two polymer films exhibit cyan and magenta colors, which constitute two legs of CMY color spaces, in their neutral states and they are soluble in common-organic solvents. According to the color mixing theory, all colors in the visible spectrum including black color can be obtained by using these polymers with a yellow colored electrochromic polymer. Among these polymers, the polymer bearing propyledioxythiophene donor units has some superior properties like high stability (it retains 94% of its electroactivity after 2000 cycles), solubility, and high coloration efficiency (230 cm(2)/C), whereas as expected ethylenedioxythiophene containing one has the lowest band gap as 1.08 eV.Article Citation - WoS: 6Citation - Scopus: 6Side Chain Effect on the Electrochemical and Optical Properties of Thieno[3,4-c]pyrrole-4,6-dione Based Donor-Acceptor Donor Type Monomers and Polymers(Royal Soc Chemistry, 2023) Cakal, Deniz; Arabaci, Elif Demir; Yildirim, Erol; Cihaner, Atilla; Onal, Ahmet M.In organic pi-conjugated materials, side chains play great roles that impact far beyond solubility. In this work, we mainly focused on the synthesis of new donor-acceptor-donor (D-A-D) type conjugated monomers and their corresponding polymers appending thieno[3,4-c]pyrrole-4,6-dione (TPD) acceptor with a new side chain, fluorene (Fl), to investigate the side chain effect. In this context, to reveal the precise effect of the side chains on the optical and electrochemical properties of the monomers and polymers synthesized in this work, four series of D-A-D monomers, each containing a TPD core unit with a different side chain, are compared and discussed in relation to each other. Notably, it was discovered that the TPD acceptor unit can be modified with any functional group other than common alkyl chains to impart new functionalities by maintaining their superior optoelectronic properties. New types of side chains can be used to tune the physical characteristics, such as solubility, absorption, emission, and molecular packing. In this work, Fl-appended monomers as a new class of D-A-D type pi-conjugated molecules containing 3,4-ethylenedioxythiophene (EDOT (E)) and 3,4-propylenedioxythiophene (ProDOT (P)) donor units were studied and it was found that 1,3-bis(2,3-dihydrothieno[3,4-b][1,4]dioxin-5-yl)-5-(9H-fluoren-2-yl)-4H-thieno[3,4-c]pyrrole-4,6(5H)-dione (E(Fl)) and 1,3-bis(3,3-didecyl-3,4-dihydro-2H-thieno[3,4-b][1,4]dioxepin-6-yl)-5-(9H-fluoren-2-yl)-4H-thieno[3,4-c]pyrrole-4,6(5H)-dione (P(Fl)) exhibited reasonable quantum yields and their corresponding polymers revealed ambipolar character with slightly lower band gap as compared to the previous analogues containing other side chains. Observed experimental results were elucidated by first principle calculations. In this paper, we discussed that using side chain engineering is an effective strategy for improving next-generation organic pi-conjugated materials with the desired properties.
