2 results
Search Results
Now showing 1 - 2 of 2
Article Citation - WoS: 39Citation - Scopus: 37MoS2-nanosheet/graphene-oxide composite hole injection layer in organic light-emitting diodes(Korean inst Metals Materials, 2017) Park, Minjoon; Thang Phan Nguyen; Choi, Kyoung Soon; Park, Jongee; Ozturk, Abdullah; Kim, Soo YoungIn this work, composite layers comprising two-dimensional MoS2 and graphene oxide (GO) were employed as hole injection layers (HILs) in organic light-emitting diodes (OLEDs). MoS2 was fabricated by the butyllithium (BuLi) intercalation method, while GO was synthesized by a modified Hummers method. The X-ray diffraction patterns showed that the intensity of the MoS2 (002) peak at 14.15A degrees decreased with increase in GO content; the GO (001) peak was observed at 10.07A degrees. In the C 1s synchrotron radiation photoemission spectra, the contributions of the C-O, C=O, and O-C=O components increased with increase in GO content. These results indicated that GO was well mixed with MoS2. The lateral size of MoS2 spanned from a few hundreds of nanometers to 1 mu m, while the size of GO was between 400 nm and a few micrometers. Thus, the coverage of the MoS2-GO composite on the ITO surface improved as the GO content increased, owing to the large particle size of GO. Notably, GO with large size could fully cover the indium tin oxide film surface, thus, lowering the roughness. The highest maximum power efficiency (PEmax) was exhibited by the OLED with MoS2-GO 6:4 composite HIL, indicating that similar contents of MoS2 and GO in MoS2-GO composites provide the best results. The OLED with GO HIL showed very high PEmax (4.94 lm W-1) because of very high surface coverage and high work function of GO. These results indicate that the MoS2-GO composites can be used to fabricate HILs in OLEDs.Article Citation - WoS: 2Citation - Scopus: 3Physical and Biological Characteristics of Electrospun Poly (vinyl Alcohol) and Reduced Graphene Oxide Nanofibrous Structure(Taylor & Francis Ltd, 2024) Sasmazel, Hilal Turkoglu; Alazzawi, Marwa; Gozutok, Melike; Sadhu, VeeraThe fabrication of graphene-based nanocomposites has been a topic of increasing interest due to graphene's exceptional physical properties and the ability to enhance the properties of various polymeric materials. Evaluating the biocompatibility of these nanocomposites is crucial to ensure their safe and effective use in biomedical applications. This study characterized and assessed the biocompatibility of previously fabricated electrospun polyvinyl alcohol (PVA)/reduced graphene oxide rGO fibrous structures by conducting a comprehensive assessment of their physical and biological characteristics. Contact angle measurements revealed that adding rGO to electrospun PVA fibers enhanced the surface wettability, improving the fibrous structure's PBS absorption capacity and degradation behavior. Including the rGO content resulted in a higher water vapor transmission rate, reaching similar to 48 g/m2day for PVA + 0.5 wt.% rGO and similar to 45 g/m2day for PVA + 1.0 wt.% rGO, compared to similar to 40 g/m2day for electrospun PVA fibers. Cell culture studies, including MTT assay, alkaline phosphatase (ALP) activity analysis, alizarin red staining, fluorescence microscopy, and SEM analyses, demonstrated that electrospun PVA + 1.0 wt.% rGO nanocomposites exhibited superior cell viability, proliferation, and growth compared to other samples, due to the improved physical properties of the PVA + 1.0 wt.% rGO fibrous structure.
