2 results
Search Results
Now showing 1 - 2 of 2
Article Citation - WoS: 87Citation - Scopus: 108Effects of Cast-In Concrete Topping on Flexural Response of Precast Concrete Hollow-Core Slabs(Elsevier Sci Ltd, 2015) Baran, ErayResults of a study focusing on the flexural response of precast prestressed concrete hollow-core slabs with cast-in-place concrete topping are presented. The experimental part of the study included load testing of five precast concrete hollow-core units. The numerically determined flexural response of test specimens was later compared with the experimentally obtained behavior. Results demonstrate that a major composite action is valid between the hollow-core unit and the topping slab under load levels corresponding to uncracked state of the cross section. Existence of a topping slab resulted in improvements in the cracking moment and initial stiffness of hollow-core units. The beneficial effect of topping slab on the ultimate moment capacity was observed to be limited, mainly because of the loss of composite action prior to reaching the ultimate moment capacity. Horizontal shear strength at the interface between hollow-core unit and topping slab was determined (1) through limited number of pushoff load tests and (2) through calculations considering the load level corresponding to initiation of significant relative slip using the basic mechanics of materials approach and the simplified code expression. The measured and computed interface shear strength values were observed to be significantly lower than the horizontal shear strength values specified by the ACI and AASHTO Specifications. (C) 2015 Elsevier Ltd. All rights reserved.Article Citation - WoS: 3Citation - Scopus: 2Performance of a Prestressed Concrete Pedestrian Bridge System Under Equivalent Static Lateral Impact Loads(Asce-amer Soc Civil Engineers, 2013) Baran, Eray; Schultz, Arturo E.; French, Catherine E.The resistance of prestressed concrete through-girder (PCTG) pedestrian bridges to lateral loads was studied in response to the increasing number of vehicular impacts in the United States. This research was motivated by the lack of reported studies analyzing the behavior of such bridges to lateral impact loads, as well as their potential vulnerability in comparison with bridges that are better able to redistribute and transfer locally applied impact loads through alternate load paths. Pedestrian bridges are of lighter construction than highway bridges and they do not have the high degree of redundancy, making them more vulnerable to collapse in the event of vehicular impact. Results from static lateral load analyses using three-dimensional, geometrically nonlinear, full-scale finite element (FE) models of a typical bridge system and bridge subassemblages were used to evaluate the characteristics of the system. The FE models were calibrated with experimental test data on typical subassemblages and connection details for PCTG bridges. Results of the experimental part of the program have already been published elsewhere. This paper summarizes the observations obtained from nonlinear static FE analyses of a PCTG pedestrian bridge system subjected to lateral impact loads. The analyses indicated that the location of impact, the type of connector, and the flexibility of the end support details affected bridge performance. Improved connection details are suggested for enhanced PCTG pedestrian bridge performance.
