Filters

2016 - 201942020 - 20232
Reset filters

Settings

Access Right: info:eu-repo/semantics/closedAccessAuthor: Icli Ozkut, Merve

Search Results

Now showing 1 - 6 of 6
  • Thumbnail Image
    Article
    Citation - WoS: 16
    Citation - Scopus: 16
    Electrochemical and Optical Characterization of a Multielectrochromic Copolymer Based on 3,4-Ethylenedioxythiophene and Functionalized Dithienylpyrrole Derivative
    (Pergamon-elsevier Science Ltd, 2019) Tutuncu, Esra; Ozkut, Merve Icli; Balci, Burcu; Berk, Hasan; Cihaner, Atilla; Icli Ozkut, Merve
    A novel conjugated copolymer, namely poly(3,4-ethylenedioxythiophene-co-1-(3,5-bis(trifluoromethyl)phenyl)-2,5-di(thiophen-2-yl)-1H-pyrrole) (P(EDOT-co-1)) was synthesized via electropolymerization method from a mixture of 3,4-ethylenedioxythiophene and 1-(3,5-bis(trifluoromethyl)phenyl)-2,5-di(thiophen-2-yl)-1H-pyrrole comonomers. The corresponding copolymer has an optical band gap of 1.7 eV and 41% optical contrast at 525 nm with a coloration efficiency of 258 cm(2)/C and 1.4 s switching time. The copolymer has a multi-electrochromic behavior: It has dark purple, purple, gray, green and cyan colors at different oxidation states. Electrochemical stability of P(EDOT-co-1) copolymer was also investigated and it was observed that the copolymer retained 86% of its stability under ambient conditions in the presence of oxygen (without purging the electrolyte solution with any inert gas) according to the current density and 83% according to the deposited charge even after 1000 redox cycles.
  • Thumbnail Image
    Article
    Citation - WoS: 5
    Citation - Scopus: 6
    An Electrochromic Polymer Based on Cyclopenta[2,1-B;3,4 Effect of a Single Atom Alteration on the Electrochemical and Optical Properties of the Polymer Backbone
    (Elsevier Science Sa, 2020) Tutuncu, Esra; Varlik, Bengisu; Kesimal, Busra; Cihaner, Atilla; Ozkut, Merve Icli; Icli Ozkut, Merve
    An electrochromic polymer, namely "poly(2,6-(3,3-didecyl-3,4-dihydro-2H-thieno [3,4-b] [1,4]dioxepin-6-yl)-4,4-dioctyl-4H-cyclopenta[2,1-b;3,4-b']dithiophene)" (P1), was electrochemically synthesized successfully, and its electrochemical and optical properties were investigated. The band gap of the polymer P1 was calculated as 1.77 eV with -5.45 eV Highest Occupied Molecular Orbital (HOMO) and -3.68 eV Lowest Unoccupied Molecular Orbital (LUMO) energy levels. The polymer P1 is bluish purple when neutralized and highly transparent greenish purple when oxidized. This color change was observed around 1.4 s between its redox states and optical contrast ratio was found to be as 49 % and 53 % with 234 cm(2)/C and 239 cm(2)/C coloration efficiencies at 590 nm and 634 nm, respectively. Moreover, the properties of this polymer were compared to its analogues and also during this comparison the effect of alteration of a single atom in the pendant unit was tried to be understood.
  • Thumbnail Image
    Article
    Citation - WoS: 2
    Citation - Scopus: 2
    D-A Type Conjugated Polymers in Dual Electrochromic Devices Tuning From Green To Blue Colors
    (Elsevier Science Sa, 2023) Ozkut, Merve Icli; Onal, Ahmet M.; Cihaner, Atilla; Icli Ozkut, Merve
    In this study, the electrochemical and electro-optical properties of four different dual electrochromic devices were unraveled. In all devices, soluble donor-acceptor-donor (D-A-D) type conjugated electrochromic polymers based on didecyl substituted 3,4-propylenedioxythiophene and heterodiazole analogs were used, and they were coated on ITO electrochemically for the construction of the electrochromic devices. Because all D-A-D polymers and PEDOT are colorful in their neutral states and colorless in their oxidized states, it is possible to observe one -to-one colors of pure two polymers in their electrochromic devices rather than a mixture of colors. It was observed that devices changed their colors from the tunes of green to blue under applied external voltage. Switching times, coloration efficiencies and stabilities of the electrochromic devices were calculated as ranging from 1.0 to 6.0 s, 133-544 cm2/C and 54-91 %, respectively, after 5000 cycles. The P(PSeP-C10)-P(PNP-C10) device showed the highest coloration efficiency (544 cm2/C) as well as the best optical and electrochemical stabilities among the electrochromic devices after 5000 cycles (91 % and 92 %, respectively).
  • Thumbnail Image
    Conference Object
    Acid/ Base Doped/ Dedoped Low Band Gap Polymer
    (Amer Chemical Soc, 2016) Karabay, Baris; Gokce, Gurcan; Cihaner, Atilla; Icli Ozkut, Merve
    [No Abstract Available]
  • Thumbnail Image
    Article
    Citation - WoS: 13
    Citation - Scopus: 14
    [1,2,5]thiadiazolo[3,4-g]quinoxaline Acceptor-Based Donor-Acceptor Polymers: Effect of Strength and Size of Donors on the Band Gap
    (Wiley, 2017) Gokce, Gurcan; Karabay, Baris; Cihaner, Atilla; Ozkut, Merve Icli; Icli Ozkut, Merve
    Electrochromic polymers based on [1,2,5]thiadiazolo[3,4-g]quinoxaline acceptor and thiophene, 3,4-ethylenedioxythiophene and 3,3-didecyl-3,4-proylenedioxythiophene donors, namely poly(6,7-diphenyl-4,9-di(thiophen-2-yl)-[1,2,5]thiadiazolo[3,4-g]quinoxaline) (P1), poly(4-(2,3-dihydrothieno[3,4-b][1,4]dioxin-5-yl)-9-(2,3-dihydrothieno[3,4-b][1,4]dioxin-7-yl)-6,7-diphenyl-[1,2,5]thiadiazolo[3,4-g]quinoxaline) (P2), and poly(4-(3,3-didecyl-3,4-dihydro-2H-thieno[3,4-b][1,4]dioxepin-6-yl)-9-(3,3-didecyl-3,4-dihydro-2H-thieno[3,4-b][1,4]dioxepin-8-yl)-6,7-diphenyl-[1,2,5]thiadiazolo[3,4-g]quinoxaline) (P3), respectively, were electrochemically and/or chemically synthesized and characterized. Electrochemical and optical properties of the polymers were then investigated. The results, which were obtained electrochemically and optically, indicate that the polymers bearing the same acceptor and different donor units have a band gap range of 0.59-1.24 eV depending on the strength and size of the donor units and band gap determination method. A significant finding in this study was the phenomenon that when the acceptor is physically huge, the general rule that a weak donor would have a high band gap whereas a strong donor would have low band gap can be broken due to the torsional angles/steric hindrances involved with physically large donor molecules. (c) 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017, 55, 3483-3493
  • Thumbnail Image
    Article
    Citation - WoS: 3
    Citation - Scopus: 3
    Synthesis and Electropolymerization of a Donor-Acceptor Trimeric Monomer Containing 3,4-Propylenedioxythiophene and Dithienosilole Units
    (Pergamon-elsevier Science Ltd, 2019) Tutuncu, Esra; Cihaner, Atilla; Ozkut, Merve Icli; Icli Ozkut, Merve
    A new dithienosilole and 3,4-propylenedioxythiophene based monomer, namely 2,6-bis(3,3-di-decyl-3,4-dihydro-2H-thieno[3,4-b] [1,4]dioxepin-6-yl)-4,4-dioctyl-4H-silolo[3,2-b:4,5-b']dithiophene, was synthesized via palladium catalyzed Stille Coupling Reaction and then polymerized electrochemically in an electrolyte solution of 0.1 M lithium perchlorate dissolved in a mixture of dichloromethane and acetonitrile (1:1, v:v). Due to the presence of long alkyl chains on donor and acceptor units, the corresponding polymer was soluble in common organic solvents like tetrahydrofuran, toluene, hexane and dichloromethane. Polymer has both fluorescent and electrochromic properties. Fluorescent polymer emits a reddish pink at 585 nm when excited at 480 nm and the quantum yield was found as 14%. On the other hand, the electrochromic polymer film changed its color from purple to transmissive cyan with 0.65 s switching time upon moving from neutral state to oxidized state and the film has a coloration efficiency of 501 cm(2)/C as well as 60% optical contrast. The optical band gap of the polymer was also calculated as 1.83 eV with a maximum wavelength at 577 nm.