5 results
Search Results
Now showing 1 - 5 of 5
Article Citation - WoS: 39Citation - Scopus: 37MoS2-nanosheet/graphene-oxide composite hole injection layer in organic light-emitting diodes(Korean inst Metals Materials, 2017) Park, Minjoon; Thang Phan Nguyen; Choi, Kyoung Soon; Park, Jongee; Ozturk, Abdullah; Kim, Soo YoungIn this work, composite layers comprising two-dimensional MoS2 and graphene oxide (GO) were employed as hole injection layers (HILs) in organic light-emitting diodes (OLEDs). MoS2 was fabricated by the butyllithium (BuLi) intercalation method, while GO was synthesized by a modified Hummers method. The X-ray diffraction patterns showed that the intensity of the MoS2 (002) peak at 14.15A degrees decreased with increase in GO content; the GO (001) peak was observed at 10.07A degrees. In the C 1s synchrotron radiation photoemission spectra, the contributions of the C-O, C=O, and O-C=O components increased with increase in GO content. These results indicated that GO was well mixed with MoS2. The lateral size of MoS2 spanned from a few hundreds of nanometers to 1 mu m, while the size of GO was between 400 nm and a few micrometers. Thus, the coverage of the MoS2-GO composite on the ITO surface improved as the GO content increased, owing to the large particle size of GO. Notably, GO with large size could fully cover the indium tin oxide film surface, thus, lowering the roughness. The highest maximum power efficiency (PEmax) was exhibited by the OLED with MoS2-GO 6:4 composite HIL, indicating that similar contents of MoS2 and GO in MoS2-GO composites provide the best results. The OLED with GO HIL showed very high PEmax (4.94 lm W-1) because of very high surface coverage and high work function of GO. These results indicate that the MoS2-GO composites can be used to fabricate HILs in OLEDs.Article Citation - WoS: 25Citation - Scopus: 24Preparation of Electrospun Pcl-Based Scaffolds by Mono/Multi-functionalized Go(Iop Publishing Ltd, 2019) Basar, Ahmet Ozan; Sadhu, Veera; Sasmazel, Hilal TurkogluIn the present study, sythetic biodegradable polymer poly(epsilon-caprolactone) (PCL) and graphene oxide (GO) were combined together to prepare 3D, composite tissue scaffolds (PCL/GO scaffolds) by using electrospinning technique. Also, the influence of Gly-Arg-Gly-Asp-Ser-Pro (GRGDSP) and/or thiophene (Th) modified GO on the composite PCL/GO mats (PCL/GO, PCL/GO-GRGDSP, PCL/ GO-Th, PCL/GO-GRGDSP-Th) was further investigated. Characteristic examinations of the scaffolds were carried out by scanning electron microscope (SEM), contact angle (CA) measurements, x-ray photoelectron spectroscopy, TGA, electrical conductivity tests, phosphate buffer saline absorption and shrinkage tests and mechanical tests. All of the scaffolds were exhibited suitable bead free and uniform morphology according to SEM images. With the addition of GO, better hydrophilicity and a slight CA decrease (similar to 5 degrees) for the PCL/GO scaffolds were observed. Mechanical properties were reinforced drastically with the addition and well-dispersion of GO into PCL matrix. The incorporation of PCL and GO exhibited enhanced electrical conductivity and the highest value was found for PCL/GO-GRGDSP-Th (2%) as 15.06 mu S cm(-1). The MG-63 osteoblast cell culture studies (MTT assay, ALP activity, Alizarin-Red staining, fluorescence and SEM analyses) showed that PCL/GO-GRGDSP-Th (1%) scaffolds exhibited the highest biocompatibility performance (1.87 fold MTT absorbance value comparing with neat PCL) due to the advanced properties of GO and the biological interfaces.Article Citation - WoS: 44Citation - Scopus: 52Graphene-Supported Platinum Catalyst-Based Membrane Electrode Assembly for Pem Fuel Cell(Springer, 2016) Devrim, Yilser; Albostan, AyhanThe aim of this study is the preparation and characterization of a graphene-supported platinum (Pt) catalyst for proton exchange membrane fuel cell (PEMFC) applications. The graphene-supported Pt catalysts were prepared by chemical reduction of graphene and chloroplatinic acid (H2PtCl6) in ethylene glycol. X-ray powder diffraction, thermogravimetric analysis (TGA) and scanning electron microscopy have been used to analyze structure and surface morphology of the graphene-supported catalyst. The TGA results showed that the Pt loading of the graphene-supported catalyst was 31%. The proof of the Pt particles on the support surfaces was also verified by energy-dispersive x-ray spectroscopy analysis. The commercial carbon-supported catalyst and prepared Pt/graphene catalysts were used as both anode and cathode electrodes for PEMFC at ambient pressure and 70 degrees C. The maximum power density was obtained for the Pt/graphene-based membrane electrode assembly (MEA) with H-2/O-2 reactant gases as 0.925 W cm(2). The maximum current density of the Pt/graphene-based MEA can reach 1.267 and 0.43 A/cm(2) at 0.6 V with H-2/O-2 and H-2/air, respectively. The MEA prepared by the Pt/graphene catalyst shows good stability in long-term PEMFC durability tests. The PEMFC cell voltage was maintained at 0.6 V without apparent voltage drop when operated at 0.43 A/cm(2) constant current density and 70 degrees C for 400 h. As a result, PEMFC performance was found to be superlative for the graphene-supported Pt catalyst compared with the Pt/C commercial catalyst. The results indicate the graphene-supported Pt catalyst could be utilized as the electrocatalyst for PEMFC applications.Article Citation - WoS: 13Citation - Scopus: 13Ruthenium Nanoparticles Supported on Reduced Graphene Oxide: Efficient Catalyst for the Catalytic Reduction of Cr(vi) in the Presence of Amine-Boranes(Wiley-v C H verlag Gmbh, 2020) Yurderi, Mehmet; Bulut, Ahmet; Kanberoglu, Gulsah Saydan; Kaya, Murat; Kanbur, Yasin; Zahmakiran, MehmetHexavalent chromium (Cr(VI)) is a toxic, mutagen and carcinogen contaminant exist in surface and groundwater, while its reduced form trivalent chromium (Cr(III)) is known as an essential element to normal carbohydrate, lipid and protein metabolism in nature. Addressed herein, for the first time, ruthenium nanoparticles supported on reduced graphene oxide (Ru@rGO) catalyze the reduction of aqueous Cr(VI) to Cr(III) in the presence of amine-boranes; ammonia-borane (AB; NH3BH3), methylamine-borane (MeAB; CH3NH2BH3), dimethylamine-borane (DMAB; (CH3)(2)NHBH3) as reducing agents under mild conditions (at room temperature and under air). Ru@rGO catalyst was reproducibly fabricated through a double-solvent method followed by wet-chemical reduction and characterized by using various spectroscopic and visualization techniques, which showed that the formation of well-dispersed and highly crystalline ruthenium(0) nanoparticles with a mean particle size of 2.7 +/- 0.9 nm on the surface of rGO. The catalytic performance of Ru@rGO was investigated in terms of activity and stability in the ammonia-borane assisted reduction of Cr(VI) to Cr(III), and the sum of the results gained from these catalytic tests revealed that Ru@rGO acts as both active (TOF=7.6 mol Cr2O72-/mol Ru.min) and stable (80% of its initial activity at 90% conversion at 5(th)reuse) heterogeneous catalyst in this significant catalytic transformation. This study also reports kinetic studies for Ru@rGO catalyzed Cr(VI) reduction in the presence of ammonia-borane depending on ruthenium ([Ru]), ammonia-borane ([AB]) concentrations and temperature to shed some light on the nature of the catalytic reaction and activation parameters.Article Citation - WoS: 41Citation - Scopus: 45Palladium Nanoparticles Decorated Graphene Oxide: Active and Reusable Nanocatalyst for the Catalytic Reduction of Hexavalent Chromium(vi)(Wiley-v C H verlag Gmbh, 2017) Celebi, Metin; Karakas, Kadir; Ertas, Ilknur Efecan; Kaya, Murat; Zahmakiran, MehmetToday, the catalytic reduction of Cr(VI) to Cr(III) stands one of the most important challenges in the environmental chemistry and catalysis due to highly stable, contaminant and toxic nature of Cr(VI). In this study, we show that a new nanocatalyst system comprised of 3-aminopropyltriethoxysilane (APTS) stabilized palladium(0) nanoparticles grafted onto the surface of graphene oxide (Pd/GO) efficiently works in the catalytic reduction of Cr(VI) to Cr(III) under mild reaction conditions. Pd/GO nanocatalyst was reproducibly prepared through two-steps procedure: (i) H-2 reduction of Pd(dba)2(dba= dibenzylideneacetone) in the presence of APTS in THF to synthesize colloidal APTS stabilized palladium(0) nanoparticles and then (ii) the deposition of 3-aminopropyltriethoxysilane stabilized palladium 0) nanoparticles onto the surface of graphene oxide (GO) by impregnation. The characterization of Pd/GO was carried out by advanced analytical techniques. The summation of the results acquired from these analyses reveals that the formation of well-dispersed and highly crystalline palladium(0) nanoparticles on the surface of GO. The catalytic performance of the resulting Pd/GO in terms of activity and stability was assessed in the catalytic reduction of Cr(VI) to Cr(III) in aqueous solution in the presence of formic acid (HCOOH) as a reducing agent. We found that Pd/GO nanocatalyst exhibits high activity (TOF= 3.6 mol Cr2O72-/mol Pdxmin) and reusability (> 90% at 5th reuse) in this catalytic transformation at room temperature.
