Search Results

Now showing 1 - 4 of 4
  • Article
    Citation - WoS: 3
    Citation - Scopus: 4
    A Simple Method To Set the Spray Properties for Flame Spray Pyrolysis Production of Nanoparticles
    (Elsevier Sci Ltd, 2020) Alhaleeb, Mustafi A.; Machin, Nesrin E.
    The most critical part of the flame spray pyrolysis (FSP) process is the nozzle, since it plays a key role in setting the spray properties. In this study, we developed an approach to adjust the nozzle throat gap size for a desired dispersion gas flow rate and upstream pressure, based on the external size and shape of a two phase external mixing nozzle. An equation was derived and validated by comparing the predicted gas flow rates with the data provided in a commercial nozzle supplier chart. Experiments were also conducted in our lab-scale FSP reactor to test the validity of the predictions. The approach developed here was found to closely predict the gap size necessary to pass the required dispersion gas flow at a desired pressure drop. Error in predictions was found to be less than 3% at an upstream pressure range of 3-10 bars. The isentropic flow assumption for perfect gases across the convergent-divergent nozzle was found to fail below 2 bars, consistent with the theory applied. By using the method here, the nozzle setting for a desired operation in an FSP process can be easily done, minimizing the time-consuming trial and error steps needed otherwise.
  • Master Thesis
    Paladyum Nanoparçacıkların Eklenmiş Olduğu Pedot'un Fotokatalitik Aktivitesinin Araştırılması
    (2017) Ahmed, Matıra Mıud Alarıbı; Kaya, Murat
    Çevre ıslahında, atık suların temizlenmesi işleminde etkili ve düşük maliyetli yöntemlerin araştırılması ve geliştirilmesi çok önemlidir. Atık suların temizlenmesinde homojen ve heterojen katalizörlerin kullanımını içeren geliştirilmiş oksidasyon prosesleri (AOP's) en etkili yöntem olarak bilinmektedir. Bu yöntemde kullanılacak fotokatalitik malzemelerin geliştirilmesi oldukça önemlidir. Görünür bölge ışığa duyarlı fotokatalizörlerin geliştirilmesi, çeşitli çevre sorunlarında gün ışığının daha etkin kullanımı ile ilgili uygulanabilir çözümler getirebilir. Son zamanlarda iletken polimerler gün ışığı altında çalışabilen etkili fotokatalizörler olarak bahsedilmektedir. İletken polimerler arasından Poly(3,4-etilendioksitiyofen) (PEDOT) en gelecek vaat eden aday olarak sayılmaktadır. Bu tezde, paladyum nanoparçacık eklenmiş PEDOT (PdNPs/PEDOT) polimerinin fotokatalitik aktivitesi incelenmiştir. Bu çalışmada fotokatalizör olarak PdNPs/PEDOT hazırlanması için oldukça basit bir yöntem gösterilmiştir. PdNPs/PEDOT nanokompozit malzemenin fotokatalitik aktivitesi metilen mavisinin UV ve güneş ışığı altında boya giderimi ile araştırılmıştır. Ayrıca, PEDOT, TiO2 nanoparçacıklarının ve PdNPs/TiO2 nanoyapısının fotokatalitik aktivitesi, PdNPs/PEDOT'ın aktivitesi ile karşılaştırılmıştır. Nanokompozit katalizörün karakterizasyonu taramalı elektron mikroskobu (SEM), geçirimli elektron mikroskobu (TEM), yüksek çözünürlüklü geçirimli elektron mikroskobu (HR-TEM), SEM ile birleştirilen enerji dağılım X-Ray (EDX) ve Raman spektroskopisi teknikleri ile yapılmıştır.
  • Review
    Citation - WoS: 29
    Citation - Scopus: 46
    Impact of Nanotechnology on Conventional and Artificial Intelligence-Based Biosensing Strategies for the Detection of Viruses
    (Springer, 2023) Ramalingam, Murugan; Jaisankar, Abinaya; Cheng, Lijia; Krishnan, Sasirekha; Lan, Liang; Hassan, Anwarul; Marrazza, Giovanna
    Recent years have witnessed the emergence of several viruses and other pathogens. Some of these infectious diseases have spread globally, resulting in pandemics. Although biosensors of various types have been utilized for virus detection, their limited sensitivity remains an issue. Therefore, the development of better diagnostic tools that facilitate the more efficient detection of viruses and other pathogens has become important. Nanotechnology has been recognized as a powerful tool for the detection of viruses, and it is expected to change the landscape of virus detection and analysis. Recently, nanomaterials have gained enormous attention for their value in improving biosensor performance owing to their high surface-to-volume ratio and quantum size effects. This article reviews the impact of nanotechnology on the design, development, and performance of sensors for the detection of viruses. Special attention has been paid to nanoscale materials, various types of nanobiosensors, the internet of medical things, and artificial intelligence-based viral diagnostic techniques.
  • Master Thesis
    ZnO Nanoparçacıklarının Hidrotermal Sentezi ve Karakterizasyonu
    (2025) Arıf, Ahmed Mohammad; Sürücü, Özge
    Bu tezde hidrotermal yöntemle sentezlenen ZnO nanoparçacıkları, sentez süresinin yapısal, morfolojik, optik ve kolloidal özelliklere etkisi açısından incelenmiştir. ZnO nanoparçacıkları 5, 15, 25 ve 35 saatlik sürelerle sentezlenmiştir. Elde edilen örnekler, X-Işını Kırınımı (XRD), Taramalı Elektron Mikroskobu (SEM), Raman Spektroskopisi, Fotolüminesans (PL) Spektroskopisi ve Zeta Potansiyeli analizleri ile kapsamlı olarak karakterize edilmiştir. XRD analizleri tüm örneklerin hekzagonal wurtzite ZnO yapısına sahip olduğunu ve kristalitenin sentez süresiyle arttığını doğrulamıştır. SEM görüntüleri, morfolojinin 5 saatlik sentezde yoğun ve çiçek benzeri agregalardan, 35 saatlik sentezde daha ayrık çubuksu yapılara dönüştüğünü ortaya koymuş, reaksiyon süresinin morfolojiyi belirleyici temel faktör olduğunu göstermiştir. Raman spektroskopisi, yüksek kristaliniteyi ve wurtzite yapısını doğrularken, yaklaşık -25 mV değerindeki zeta potansiyeli sonuçları, sentez süresinden bağımsız olarak nanoparçacıkların kararlı kolloidal davranış sergilediğini ortaya koymuştur. Fotolüminesans analizi, yakın kızılötesi bölgede (~740-745 nm) kuvvetli kusur kaynaklı emisyonu belirlemiş ve 25 saatlik örnekte emisyon şiddetinin maksimuma ulaştığını göstererek kristal kalitesi ve radyatif kusur yoğunluğu arasında optimal bir dengeye işaret etmiştir.