2 results
Search Results
Now showing 1 - 2 of 2
Article Citation - WoS: 50Citation - Scopus: 54The Effect of Synthesis and Doping Procedures on Thermoluminescent Response of Lithium Tetraborate(Elsevier Science Sa, 2011) Pekpak, E.; Yilmaz, A.; Ozbayoglu, G.Lithium tetraborate has been a scientific focus since 1960s by the courtesy of the thermoluminescence property it possesses. Moreover, it is utilized in surface acoustic wave apparatuses, in sensor sector and in laser technology owing to its non-linear optical characteristics. For the uses in thermoluminescence dosimetry lithium tetraborate is activated by addition of a variety of metals as dopants. This study includes the synthesis of lithium tetraborate by two methods (high temperature solid state synthesis and water/solution assisted synthesis), doping of activators into the matrix material synthesized and characterization of the products. Lithium tetraborate is readily commercially available in TL (Themoluminescence) dosimetry; hence, the main aim in this study was to specify the effect of synthesis and doping methods on the TL response. The heating temperature for the synthesis was 750 degrees C and the retention time as selected as 4 h for both methods. The synthesis stages were followed by doping step where the compounds of Cu, Ag and In in different proportions were doped in lithium tetraborate by solid state and solution assisted doping techniques. Characterization of the product was achieved by X-ray diffraction (XRD). Fourier transform Infra Red Spectroscopy (FT-IR) and Scanning Electron Microscopy (SEM) techniques. All samples prepared displayed TL response and the best TL signal was obtained from the sample produced by solid state synthesis and doped by solution assisted method with 0.1% Cu and 0.004% Ag. (C) 2010 Elsevier B.V. All rights reserved.Article Citation - WoS: 31Citation - Scopus: 37Effect of Initial Water Content and Calcination Temperature on Photocatalytic Properties of Tio2 Nanopowders Synthesized by the Sol-Gel Process(Elsevier Sci Ltd, 2015) Agartan, Lutfi; Kapusuz, Derya; Park, Jongee; Ozturk, AbdullahThe effects of initial water content and calcination temperature on sol gel synthesized TiO2 powders were studied. Mother solutions had water/Ti-precursor mole ratios (R ratio) of 1, 5, 10, and 50. Dried aerogels were calcined for 3 h at temperatures of 300, 400, and 500 degrees C to obtain crystallized TiO2 nanopowders in the range of 15-30 nm. PE-scanning electron microscopy and X-ray diffraction techniques were employed to investigate the morphological and structural properties of the nanopowders synthesized. Profound effect of gel viscosity was observed on the formation mechanism and extent of crystallinity in the powders. Methylene blue degradation test results suggest, photocatalytic performance is enhanced as initial water content and calcination temperature increased. Band-gap energy of the powders ranged from 3.09 to 3.27 eV. Overall, this study shows that initial water content and calcination regime have a profound effect on the phase assembly, crystallite size, band-gap energy, and photocatalytic performance of sol gel synthesized TiO2 nanopowders. (C) 2015 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
