1323 results
Search Results
Now showing 1 - 10 of 1323
Article Citation - WoS: 2Citation - Scopus: 2Performance of Ge-Sandwiched Gase Layers(Springer, 2018) Qasrawi, A. F.; Qasrawı, Atef Fayez Hasan; Abdallah, Maisam M. A.; Qasrawı, Atef Fayez Hasan; Department of Electrical & Electronics Engineering; Department of Electrical & Electronics EngineeringIn the current work, we report the effect of sandwiching Ge between two stacked layers of GaSe. The GaSe and Ge-sandwiched GaSe were subjected to x-ray diffraction, optical spectrophotometry and impedance spectroscopy measurement and analysis. The presence of a Ge layer between two layers of GaSe was observed to cause uniform deformation and increase the absorption of light by GaSe. The response of the dielectric constant to incident light was also significantly enhanced by Ge sandwiching. In addition, Drude-Lorentz modeling of the imaginary part of the dielectric constant revealed that the layer of Ge layer between GaSe layers increased the drift mobility from 30.76 cm(2)/Vs to 52.49 cm(2)/Vs. It also enhanced the plasmon frequency without altering the free carrier density. Moreover, Ge improved the band filtering features of GaSe. In particular, it enhanced the sensitivity of the impedance response to the incident signal and increased the return loss factor of GaSe when it was used as a high band pass filter.Article Patient Safety in Healthcare: A Proposal for Ensuring the Use of Regulation-Compliant Safety Devices(Springer Heidelberg, 2025) Bayrak, TuncayMedical devices used in health care should fulfill the requirements of the technical regulations to protect patient health. Difficulties in enforcing stricter rules in the new medical device regulations may negatively affect the continuity of care. This study examines the status of manufacturers' compliance with medical device regulations, based on predefined criteria, and proposes a collaborative action plan and an approach to verify regulatory compliance. We conducted a nationwide survey comprising questions grouped by criteria to understand the status of the manufacturers in terms of compliance with the Medical Device Regulation. Four hundred sixty-seven manufacturers participated in the survey. We achieved a Cronbach's alpha of 0.77, which indicates that the survey is statistically reliable. We applied the independent samples t-test to the responses to determine significant features per question and employed factor analysis to investigate the relationships of the questions. The results of independent samples t-tests showed statistically significant differences across groups in replies to several survey items (p < 0.05), indicating that participants' opinions varied based on their demographic characteristics. We applied Exploratory Factor Analysis to introduce the relationships between the questions. The analysis revealed that manufacturers continue to face substantial challenges in acquiring sufficient knowledge and operational capability to meet MDR requirements. In light of these findings, we focused on the person responsible for regulatory compliance, who plays a central role in maintaining regulatory compliance within manufacturing organizations. We proposed an action plan at the macro level to introduce more effective action plans in cooperation with other stakeholders, including healthcare providers, and a verification approach for regulatory compliance to enhance the Person Responsible for Regulatory Compliance's competence. Manufacturers should implement effective postmarketing clinical follow-up plans involving device-oriented parameters for monitoring in the healthcare system, especially in collaboration with health professionals.Review Citation - WoS: 16Citation - Scopus: 20Assessing the Coverage of E-Health Services in Sub-Saharan Africa a Systematic Review and Analysis(Georg Thieme verlag Kg, 2017) Adeloye, Davies; Adigun, Taiwo; Misra, Sanjay; Omoregbe, NicholasBackground: E-Health has attracted growing interests globally. The relative lack of facilities, skills, funds and information on existing e-Health initiatives has affected progress on e-Health in Africa. Objectives: To review publicly available literature on e-Health in sub-Saharan Africa (sSA) towards providing information on existing and ongoing e-Health initiatives in the region. Methods: Searches of relevant literature were conducted on Medline, EMBASE and Global Health, with search dates set from 1990 to 2016. We included studies on e-Health initiatives (prototypes, designs, or completed projects) targeting population groups in sSA. Results: Our search returned 2322 hits, with 26 studies retained. Included studies were conducted in 14 countries across the four sub-regions in sSA (Central, East, South and West) and spreading over a 12-year period, 2002-2014. Six types of e-Health interventions were reported, with 17 studies (65%) based on telemedicine, followed by mHealth with 5 studies (19%). Other e-Health types include expert system, electronic medical records, e-mails, and online health module. Specific medical specialties covered include dermatology (19%), pathology (12%) and radiology (8%). Successes were 'widely reported' (representing 50% overall acceptance or positive feedbacks in a study) in 10 studies (38%). The prominent challenges reported were technical problems, poor inter net and connectivity, participants' selection biases, contextual issues, and lack of funds. Conclusion: E-Health is evolving in sSA, but with poorly published evidence. While we call for more quality research in the region, it is also important that population-wide policies and on-going e-Health initiatives are contextually feasible, acceptable, and sustainable.Article Citation - WoS: 1Citation - Scopus: 2Existence of Solutions for Odd-Order Multi-Point Impulsive Boundary Value Problems on Time Scales(Walter de Gruyter Gmbh, 2022) Georgiev, Svetlin G.; Akgol, Sibel Dogru; Kus, Murat EymenUsing a fixed point theorem due to Schaefer, the existence of solutions for an odd-order m-point impulsive boundary value problem on time scales is obtained. The problem considered is of general form, where both the differential equation and the impulse effects are nonlinear. Illustrative examples are provided.Article Citation - WoS: 144Citation - Scopus: 156Uniqueness of Solution for Higher-Order Nonlinear Fractional Differential Equations With Multi-Point and Integral Boundary Conditions(Springer-verlag Italia Srl, 2021) Sevinik-Adiguzel, Rezan; Aksoy, Umit; Karapinar, Erdal; Erhan, Inci M.This study is devoted to the development of alternative conditions for existence and uniqueness of nonlinear fractional differential equations of higher-order with integral and multi-point boundary conditions. It uses a novel approach of employing a fixed point theorem based on contractive iterates of the integral operator for the corresponding fixed point problem. We start with developing an existence-uniqueness theorem for self-mappings with contractive iterate in a b-metric-like space. Then, we obtain the unique solvability of the problem under suitable conditions by utilizing an appropriate b-metric-like space.Article Citation - WoS: 4Citation - Scopus: 4Fixed Point Theorems for Generalized Weak Contractions Satisfying Rational Expression on a Ordered Partial Metric Space(Maik Nauka/interperiodica/springer, 2013) Karapinar, Erdal; Marudai, M.; Pragadeeswarar, V.The purpose of this manuscript is to present a fixed point theorem using a generalized weak contraction condition of rational type in the context of partial metric spaces.Article Citation - WoS: 39Citation - Scopus: 49Focus Variation Measurement and Prediction of Surface Texture Parameters Using Machine Learning in Laser Powder Bed Fusion(Asme, 2020) Ozel, Tugrul; Altay, Ayca; Kaftanoglu, Bilgin; Leach, Richard; Senin, Nicola; Donmez, AlkanThe powder bed fusion-based additive manufacturing process uses a laser to melt and fuse powder metal material together and creates parts with intricate surface topography that are often influenced by laser path, layer-to-layer scanning strategies, and energy density. Surface topography investigations of as-built, nickel alloy (625) surfaces were performed by obtaining areal height maps using focus variation microscopy for samples produced at various energy density settings and two different scan strategies. Surface areal height maps and measured surface texture parameters revealed the highly irregular nature of surface topography created by laser powder bed fusion (LPBF). Effects of process parameters and energy density on the areal surface texture have been identified. Machine learning methods were applied to measured data to establish input and output relationships between process parameters and measured surface texture parameters with predictive capabilities. The advantages of utilizing such predictive models for process planning purposes are highlighted.Article Citation - WoS: 9Citation - Scopus: 8Existence and Uniqueness of Best Proximity Points Under Rational Contractivity Conditions(Walter de Gruyter Gmbh, 2016) Karapinar, Erdal; Roldan-Lopez-de-Hierro, Antonio-Francisco; Sadarangani, KishinThe main aim of this paper is to present some theorems in order to guarantee existence and uniqueness of best proximity points under rational contractivity conditions using very general test functions. To illustrate the variety of possible test functions, we include some examples of pairs of functions which are included in innovative papers published in the last years. As a consequence, we prove that our results unify and extend some recent results in this field.Article Citation - WoS: 11Citation - Scopus: 20Reinforcement Learning Using Fully Connected, Attention, and Transformer Models in Knapsack Problem Solving(Wiley, 2022) Yildiz, Beytullah; Yıldız, Beytullah; Yıldız, BeytullahKnapsack is a combinatorial optimization problem that involves a variety of resource allocation challenges. It is defined as non-deterministic polynomial time (NP) hard and has a wide range of applications. Knapsack problem (KP) has been studied in applied mathematics and computer science for decades. Many algorithms that can be classified as exact or approximate solutions have been proposed. Under the category of exact solutions, algorithms such as branch-and-bound and dynamic programming and the approaches obtained by combining these algorithms can be classified. Due to the fact that exact solutions require a long processing time, many approximate methods have been introduced for knapsack solution. In this research, deep Q-learning using models containing fully connected layers, attention, and transformer as function estimators were used to provide the solution for KP. We observed that deep Q-networks, which continued their training by observing the reward signals provided by the knapsack environment we developed, optimized the total reward gained over time. The results showed that our approaches give near-optimum solutions and work about 40 times faster than an exact algorithm using dynamic programming.Article Citation - WoS: 22Citation - Scopus: 23On Residual Lifetime of Coherent Systems After the rth Failure(Springer, 2013) Eryilmaz, SerkanIn this article we study the residual lifetime of a coherent system after the rth failure, i.e. the time elapsed from the rth failure until the system failure given that the system operates at the time of the rth failure. We provide a mixture representation for the corresponding residual lifetime distribution in terms of signature. We also obtain some stochastic ordering results for the residual lifetimes.
