Filters

2020 - 20213
Reset filters

Settings

Scopus Q: Q1Subject: Thin films

Search Results

Now showing 1 - 3 of 3
  • Thumbnail Image
    Article
    Citation - WoS: 8
    Citation - Scopus: 10
    Temperature Effects on Optical Characteristics of Cdse Thin Films
    (Elsevier Sci Ltd, 2021) Gullu, H. H.; Isik, M.; Surucu, O.; Gasanly, N. M.; Parlak, M.
    CdSe is one of the significant members of II-VI type semiconducting family and it has a wide range of technological applications in which optoelectronic devices take a special position. The present paper reports the structural and optical characteristics of thermally evaporated CdSe thin films. XRD pattern exhibited preferential orientation along (111) plane while atomic composition analyses resulted in the ratio of Cd/Se as closer to 1.0. Temperature-dependent band gap characteristics of CdSe thin films were investigated for the first time by carrying out transmission experiments in the 10-300 K range. The analyses showed that direct band gap energy of the compound decreases from 1.750 (at 10 K) to 1.705 eV (at 300 K). Varshni model was successfully applied to the temperature-band gap energy dependency and various optical constants were determined. Raman spectrum of CdSe thin films was also presented to understand the vibrational characteristics of the compound. The present paper would provide worthwhile data to researchers especially studying on optoelectronic device applications of CdSe thin films.
  • Thumbnail Image
    Article
    Citation - WoS: 10
    Citation - Scopus: 10
    Temperature Dependent Band Gap in Sns2x< (x=0.5) Thin Films
    (Elsevier Sci Ltd, 2020) Delice, S.; Isik, M.; Gullu, H. H.; Terlemezoglu, M.; Surucu, O. Bayrakli; Gasanly, N. M.; Parlak, M.
    Structural and optical properties of SnS2xSe(2-2x) thin films grown by magnetron sputtering method were investigated for composition of x = 0.5 (SnSSe) in the present study. X-ray diffraction, energy dispersive X-ray spectroscopy, atomic force microscopy and scanning electron microscopy methods were used for structural characterization while temperature-dependent transmission measurements carried out at various temperatures in between 10 and 300 K were accomplished for optical investigations. X-ray diffraction pattern of studied composition presented peaks at positions which are between those of SnSe2 and SnS2. Transmittance spectra recorded at all applied temperatures were analyzed using well-known Tauc relation. Analyses revealed the direct band gap energy value of SnSSe thin films as 1.75 eV at room temperature. Change of band gap energy as a response to varying temperature were discussed in the study by utilizing Varshni relation. It was shown that variation of gap energy values was well-matched with the Varshni's empirical formula. Energy band gap at absolute zero and rate of change of band gap with temperature were found to be 1.783 eV and -2.1 x 10(-4) eV K-1, respectively.
  • Thumbnail Image
    Article
    Citation - WoS: 5
    Citation - Scopus: 6
    Microporous vanadosilicate films with tailorable V4+/V5+ratio to achieve enhanced visible-light photocatalysis
    (Elsevier, 2021) Kuzyaka, Duygu; Uzun, Ceren; Yildiz, Ilker; Kaya, Murat; Akata, Burcu
    This study investigates the changes induced into the photocatalytic activity under solar light irradiation upon changing the structural film properties and tailor the concentration of defects in microporous vanadosilicate AM6 films. For this purpose, the preparation of AM-6 films with different V4+/V5+ ratios and their utilization as photocatalysts for the decomposition of MB were carried out. Two approaches were used for obtaining AM-6 films with different V4+/V5+ ratios: altering the seed layer coating technique and altering the molar water content of the secondary growth gel. It was seen that dip coating method resulted in an increase in the thickness of the films and it was presumed that the adsorption of MB by AM-6 films was the predominant factor in photocatalytic activity. The second approach of increasing the molar water content of the secondary growth gel provided an increase in the defect concentration resulting in an enhanced photocatalytic activity under the solar light. In the current study, the defect concentration of the prepared films was determined by using XPS and Raman spectroscopy techniques. Accordingly, it was determined that the samples with lower amount V4+/V5+ ratio showed better photocatalytic activity under the solar light irradiation indicating that V5+ cations are responsible for the photocatalytic activity under visible light irradiation. This work provides methods of production of microporous films showing photocatalytic activity under visible light without the requirement of any post-synthesis treatments.