280 results
Search Results
Now showing 1 - 10 of 280
Article Citation - WoS: 56Citation - Scopus: 64Development of 500 W Pem Fuel Cell Stack for Portable Power Generators(Pergamon-elsevier Science Ltd, 2015) Devrim, Yilser; Devrim, Huseyin; Eroglu, InciPolymer Electrolyte Membrane Fuel Cell (PEMFC) portable power generators are gaining importance in emergency applications. In this study, an air-cooled PEMFC stack was designed and fabricated for net 500 W power output. Gas Diffusion Electrodes (GDE's) were manufactured by ultrasonic spray coating technique. Stack design was based on electrochemical data obtained at 0.60 V was 0.5 A/cm(2) from performance tests of a single cell having the same membrane electrode assemblies (MEA) that had an active area of 100 cm(2). Graphite bipolar plates were designed and machined by serpentines type flow. The stack comprising of 24 cells was assembled with external fixing plates. The stack temperature was effectively regulated by the cooling fan based on on-off control system. A maximum power of 647 W was obtained from the stack. The PEMFC stack was stable during start-up and shutdown cycling testing for 7 days at 65 degrees C in H-2/air at a constant cell voltage. Copyright (c) 2015, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.Article Citation - WoS: 1Citation - Scopus: 1Novel Frequency-Domain Criterion for Elimination of Limit Cycles in a Class of Digital Filters With Single Saturation Nonlinearity(Pergamon-elsevier Science Ltd, 2008) Singh, VimalA frequency-domain criterion for the elimination of limit cycles in a class of digital filters utilizing single saturation nonlinearity is presented. The criterion is derived by exploiting the structural properties of the system under consideration in a greater detail. A novel feature of the criterion is that it takes the form of a matrix inequality, despite the fact that there is single nonlinearity in the system. An example showing the effectiveness of the criterion is given. (c) 2006 Elsevier Ltd. All rights reserved.Article Hopping Conduction in Ga4se3< Layered Single Crystals(Pergamon-elsevier Science Ltd, 2008) Qasrawi, A. F.; Gasanly, N. M.The conduction mechanism in Ga4Se3S single crystals has been investigated by means of dark and illuminated conductivity measurements for the first time. The temperature-dependent electrical conductivity analysis in the region of 100-350 K, revealed the dominance of the thermionic emission and the thermally assisted variable range hopping (VRH) of charged carriers above and below 170 K, respectively. The density of states near the Fermi level and the average hopping distance for this crystal in the dark were found to be 7.20 x 10(15) cm(-3) eV(-1) and 7.56 x 10(-6) cm, respectively. When the sample was illuminated, the Mott's VRH parameters are altered, particularly, the average hopping distance and the density of states near the Fermi level increase when light intensity increases. This action is attributed to the electron generation by photon absorption, which in turn leads to the Fermi level shift and/or trap density reduction by electron-hole recombination. (C) 2008 Elsevier Ltd. All rights reserved.Conference Object Citation - WoS: 86Citation - Scopus: 95Enhancement of Pem Fuel Cell Performance at Higher Temperatures and Lower Humidities by High Performance Membrane Electrode Assembly Based on Nafion/Zeolite Membrane(Pergamon-elsevier Science Ltd, 2015) Devrim, Yilser; Albostan, AyhanThis work reports the preparation of Nafion/zeolite composite membranes with different zeolite loading. The structure of the Nafion/zeolite composite membranes are investigated by Scanning Electron Microscopy (SEM), X-Ray Diffraction (XRD) and by thermogravimetric analysis (TGA). The introduction of zeolite particles into the Nafion matrix helps to improve the water uptake, proton conductivity and thermal stability of the nanocomposite membranes compared to the virgin Nafion membrane. The SEM analyses have proved the uniform and homogeneous distribution of zeolite in composite membranes. The composite membranes are tested in a single PEMFC with a 5 cm(2) active area operating at the temperature range of 75-120 degrees C and in humidified under 50% relative humidity (RH) and fully humidified conditions. Single PEMFC tests show that Nafion/zeolite composite membrane is more stable and also performed better than virgin Nafion membrane at low humidity condition. The results indicate the Nafion/zeolite composite membranes could be utilized as the proton exchange membranes for PEMFC. Copyright (C) 2015, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.Article Citation - WoS: 25Citation - Scopus: 26Identifying the Potentials for Charge Transport Layers Free N-P Homojunction-Based Perovskite Solar Cells(Pergamon-elsevier Science Ltd, 2022) Khan, Danish; Sajid, Sajid; Khan, Suliman; Park, Jongee; Ullah, IhsanPerovskite solar cells (PSCs) with no charge transport layers (CTLs) could be one of the major device architectures for the production of simple and low-cost devices. However, CTLs-free PSCs based on n-p homojunction have yet to show high power conversion efficiency (PCE), which is most likely due to inadequate light-and charge-management in the p-type perovskite. The device operation is examined using Solar Cell Capacitance Simulator (SCAPS)-software, and a novel n-p homojunction design is proposed to attempt efficient CTLs-free PSCs. Several aspects of p-type layer that can affect device performance, such as acceptor density, photon harvesting capability, defects density, and resistances to the transport of charge-carriers are scrutinized and adjusted. Furthermore, the effects of different work-functions of metal electrodes are examined. A suitable acceptor concentration is required for oriented charge transport. It is determined that a p-type perovskite with a thickness of 0.3 mu m is advantageous for high performance. A metal electrode with a high work-function is essential for efficient device. Consequently, a PCE of 15.60% is obtained with an optimal defect density of E15 cm(-3), indicating that n-p homojunction-based CTLs-free PSCs are promising since they simplify the device design and fabrication process while retaining an acceptable PCE.Article Citation - WoS: 9Citation - Scopus: 9Transient and Steady State Photoelectronic Analysis in Tlinse2 Crystals(Pergamon-elsevier Science Ltd, 2011) Qasrawi, A. F.; Gasanly, N. M.The temperature and illumination effects on the transient and steady state photoconductivities of TlInSe2 crystals have been studied. Namely, two recombination centres located at 234 and at 94 meV and one trap center located at 173 meV were determined from the temperature-dependent steady state and transient photoconductivities, respectively. The illumination dependence of photoconductivity indicated the domination of sublinear and supralinear recombination mechanisms above and below 160 K, respectively. The change in the recombination mechanism is attributed to the exchange of roles between the linear recombination at the surface and trapping centres in the crystal, which become dominant as temperature decreases. The transient photoconductivity measurement allowed the determination of the capture coefficient of traps for holes as 3.11 x 10(-22) cm(-2). (C) 2011 Elsevier Ltd. All rights reserved.Article Citation - WoS: 18Citation - Scopus: 19Heat Treatment Effects on the Structural and Electrical Properties of Thermally Deposited Agin5s8< Thin Films(Pergamon-elsevier Science Ltd, 2011) Qasrawi, A. F.; Kayed, T. S.; Ercan, FilizThe heat treatment effects on structural and electrical properties of thermally deposited AgIn5S8 thin films have been investigated. By increasing the annealing temperature of the sample from 450 to 500 K, we observed a change in the crystallization direction from (420) to (311). Further annealing of the AgIn5S8 films at 550, 600 and 650 K resulted in larger grain size in the (311) preferred direction. The room temperature electrical resistivity, Hall coefficient and Hall mobility were significantly influenced by higher annealing temperatures. Three impurity levels at 230, 150, and 78 meV were detected for samples annealed at 350 K. The electrical resistivity decreased by four orders of magnitude when the sample annealing temperature was raised from 350 to 450 K. The temperature dependent electrical resistivity and carrier concentration of the thin film samples were studied in the temperature ranges of 25-300 K and 140-300 K, respectively. A degenerate-nondegenerate semiconductor transition at approximately 180 was observed for samples annealed at 450 and 500 K. Similar type of transition was observed at 240 K for samples annealed at 600 and 650 K. (C) 2011 Elsevier Ltd. All rights reserved.Article Citation - WoS: 75Citation - Scopus: 75Composite Membrane by Incorporating Sulfonated Graphene Oxide in Polybenzimidazole for High Temperature Proton Exchange Membrane Fuel Cells(Pergamon-elsevier Science Ltd, 2022) Devrim, Yilser; Durmus, Gizem Nur BulanikThe objective of this work is to examine the polybenzimidazole (PBI)/sulfonated graphene oxide (sGO) membranes as alternative materials for high-temperature proton exchange membrane fuel cell (HT-PEMFC). PBI/sGO composite membranes were characterized by TGA, FTIR, SEM analysis, acid doping&acid leaching tests, mechanical analysis, and proton conductivity measurements. The proton conductivity of composite membranes was considerably enhanced by the existence of sGO filler. The enhancement of these properties is related to the increased content of -SO3H groups in the PBI/sGO composite membrane, increasing the channel availability required for the proton transport. The PBI/sGO membranes were tested in a single HT-PEMFC to evaluate high-temperature fuel cell performance. Amongst the PBI/sGO composite membranes, the membrane containing 5 wt. % GO (PBI/sGO-2) showed the highest HT-PEMFC performance. The maximum power density of 364 mW/cm(2) was yielded by PBI/sGO-2 membrane when operating the cell at 160 degrees C under non humidified conditions. In comparison, a maximum power density of 235 mW/cm(2) was determined by the PBI membrane under the same operating conditions. To investigate the HT-PEMFC stability, long-term stability tests were performed in comparison with the PBI membrane. After a long-term performance test for 200 h, the HT-PEMFC performance loss was obtained as 9% and 13% for PBI/sGO-2 and PBI membranes, respectively. The improved HT-PEMFC performance of PBI/sGO composite membranes suggests that PBI/sGO composites are feasible candidates for HT-PEMFC applications. (C) 2022 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.Article Citation - WoS: 13Citation - Scopus: 12Novel Global Robust Stability Criterion for Neural Networks With Delay(Pergamon-elsevier Science Ltd, 2009) Singh, Vimal; Sıngh, Vımal; Sıngh, Vımal; Department of Mechatronics Engineering; Department of Mechatronics EngineeringA novel criterion for the global robust stability of Hopfield-type interval neural networks with delay is presented. An example illustrating the improvement of the present criterion over several recently reported criteria is given. (C) 2008 Elsevier Ltd. All rights reserved.Article Citation - WoS: 79Citation - Scopus: 82A Generalized Contraction Principle With Control Functions on Partial Metric Spaces(Pergamon-elsevier Science Ltd, 2012) Abdeljawad, Thabet; Karapinar, Erdal; Tas, KenanPartial metric spaces were introduced by Matthews in 1994 as a part of the study of denotational semantics of data flow networks. In this article, we prove a generalized contraction principle with control functions phi and psi on partial metric spaces. The theorems we prove generalize many previously obtained results. We also give some examples showing that our theorems are indeed proper extensions. (C) 2011 Elsevier Ltd. All rights reserved.
